Hi, great video, the instructions included are a bit vague! , but the AC finder works much better if the power is on and powering something, to find the wire to a socket you should plug something in like a lamp or vacuum cleaner and turn it on :-)
The AC finder works under load. Normal. Otherwise it is a simple wire(metal). Its a nice detector. I had the previous generation and it worked very well for almost a decade or so. Suddenly a week ago..it made some retirement noices until it stopped for good. :) But overall it did it's job very well.
so if I understood AC finding correctly, the wire in this video example is located horizontally and not vertically, and thats why at horizontal line is a check mark displayed, right? I have finder with same options and same work modes but from Einhell, they function same way I think.
Just took one of these home. Not expecting miracles for under a tenner but glad I found this video and confirmed what I was thinking as was away to launch it
Two things to note here, it won’t work on plasterboard that has metal foil insulation on the back, also, I wondered why it just wouldn’t register on my living room wall, my wallpaper has metallic flakes running thru it , Doh !!
The A/C test failed for me too.... This is the whole reason why I bought the Parkside 4 in 1 multi detector. I had to borrow a Bosch Truvo one from a friend. Utterly useless... buy cheap, buy twice
purtroppo ho riscontrato lo stesso difetto per la corrente 😕. Sembra rispondere meglio con la corrente dc, ho provato con il cavo di ricarica dello smartphone. Non so se fare il reso.
Per la corrente non funzionava perché il cavo non era collegato a un'utenza, quindi non è passata una corrente elettrica di una certa intensità. Lo strumento rileva la corrente, non la tensione elettrica.
Poco sensibile in generale, ma con la corrente elettrica inutile. Cambiato 2 volte ma sempre inefficace. Il basso costo lo definisce comunque alla stregua di un giocattolo. Non all'altezza della maggior parte dei prodotti Parkside.
5:08. The AC finder only works under load. This video is the best demonstration/test of this Parkside multi-detector in RUclips! Good work.
the explaining of each function(especially AC) is great
Parkside should be paying you for this demo
their manual suck
Thanks a lot for watching and leaving a lovely comment
Hi, great video, the instructions included are a bit vague! , but the AC finder works much better if the power is on and powering something, to find the wire to a socket you should plug something in like a lamp or vacuum cleaner and turn it on :-)
The AC finder works under load. Normal. Otherwise it is a simple wire(metal).
Its a nice detector. I had the previous generation and it worked very well for almost a decade or so.
Suddenly a week ago..it made some retirement noices until it stopped for good. :)
But overall it did it's job very well.
Thanks for sharing
Thanks for your video from Spain, very nice review!
Thanks for watching!
Thank you very much for this test!
You are welcome!
so if I understood AC finding correctly, the wire in this video example is located horizontally and not vertically, and thats why at horizontal line is a check mark displayed, right? I have finder with same options and same work modes but from Einhell, they function same way I think.
Hi, is there any chance you could check window cleaner? Thank you ;)
thank you for the video - parkside has to change alot !!! ....... now I know i buy a different one ...
I'm happy I've helped you to make up your mind.
Perfect, thank you.
You're welcome!
For the AC measurement you must have an electrical consumer on the cable
Can you tell if it works on masonry walls?
❤❤
Thanks for watching.
Try to detect the electrical wiring in the panel wall.
Thanks for watching
Just took one of these home. Not expecting miracles for under a tenner but glad I found this video and confirmed what I was thinking as was away to launch it
Thanks a lot for watching and leaving a comment
Two things to note here, it won’t work on plasterboard that has metal foil insulation on the back, also, I wondered why it just wouldn’t register on my living room wall, my wallpaper has metallic flakes running thru it , Doh !!
😯
I have one but the stud finding mode is totally useless, it doesn't find studs and only beeps when you press it against the wall
Yes well done in need one
Thanks a lot
Very helpful thank you very much
Great video, thanks
My pleasure!
The A/C test failed for me too.... This is the whole reason why I bought the Parkside 4 in 1 multi detector. I had to borrow a Bosch Truvo one from a friend. Utterly useless... buy cheap, buy twice
ruclips.net/video/FtjRYB-b6Ho/видео.html
Good video, do you think they are good.
It's not brilliant at detecting live cables but good at finding other things.
I think it's worth the money I paid for it
Thanks
Welcome
Thank you :)
You're welcome!
non funziona per la corrente. Ho giá riscontrato lo stesso difetto sul mio e ho avuto conferma su tutti i video che ho visto. ciao
Grazie per l'informazione
purtroppo ho riscontrato lo stesso difetto per la corrente 😕.
Sembra rispondere meglio con la corrente dc, ho provato con il cavo di ricarica dello smartphone.
Non so se fare il reso.
Per la corrente non funzionava perché il cavo non era collegato a un'utenza, quindi non è passata una corrente elettrica di una certa intensità. Lo strumento rileva la corrente, non la tensione elettrica.
O qus significa DEPP?
عفوا كم ثمن هذا الجهاز
دفعت حوالي عشرة جنيهات بريطانية
Legend
Usefull video as the french translation of the user manuel is just pointless. Thank you for that
Glad it was helpful!
Jean Christophe Gonzales *manual
Poco sensibile in generale, ma con la corrente elettrica inutile. Cambiato 2 volte ma sempre inefficace. Il basso costo lo definisce comunque alla stregua di un giocattolo. Non all'altezza della maggior parte dei prodotti Parkside.
Grazie per aver guardato e lasciato il commento. Penso che funzioni bene ma non è molto bravo a rilevare cavi in tensione
Useless, even after calibration the studs are not being found.
Are you calibrating correctly? Maybe change at the store.
ДЯКУЮ. СЛАВА УКРАЇНІ! КИЇВ.
ДЯКУЮ ЗА ПЕРЕГЛЯД. СЛАВА УКРАЇНІ! ruclips.net/video/hmnNXWQrByU/видео.html