Thanks for posting this video, including the installation. The video seemed to end before you took it out on the road. Is there another video after this one? Anyway, I just ordered a Tymate M7-3 TPMS for our Jayco 24 FBS Camping trailer. It has new Goodyear Endurance tires on it, and I want the TPMS just to see what kind of temperature and pressure changes occur as I’m towing, as well as to alert me if there is a sudden loss of air pressure. Our next scheduled trip isn’t until late September, unfortunately. But I’m hoping we can sneak a shorter trip in between now and then.
Any update on this product. I bought it and was curious if it actually is working for you and worth the time to install? Thank you I appreciate your time .
100% it is worth it. It doesn't take more than 20 minutes to install once you have everything taken out. We are going on our 3rd year with the original batteries and device with no issues. I highly recommend it if you want the peace of mind while driving and not worrying about a low tire or a blowout.
@@smorervfun thank you for confirming, I just installed them on my camper and they are spot on with the pressure gauge. I appreciate the feedback. Thank you
Good video. I just wish you detailed more about the first thing part where you held both the left minus button together with the middle setting button and how we do that. I've got the dual axle travel trailer also. After I hold those 2 buttons the left front tire starts flashing. Then I hit the right ➕️ plus button and the flashing wheel moves to right front etc. What do we do next. I'd also like to set in 2 spares. Is this possible? I got the 6 sensor kit. Otherwise it's just like yours. So I figured I'd set the L3 & R3 as my two spares. I can't get the standby display to show all 6 wheels. I got it somehow to show 4 but can't do 6. And the instructions just say hold the left ➖️ minus and the middle setting simultaneously, but then what🤔. It's very confusing. Any ideas please help. I'm still trying to figure this out. I'm guessing we need to have all 4-6 sensors near enough to the device in order to get it all working right. Before we even start driving with it. Thank you for trying to help others. Safe travels
I have this in my hands and I am walking through it with you, and I don't understand how you are getting to those numbers, where it is allowing you to put low pressure amounts in lol I was doing fine but you lost me there 😅
Can you make a video of how to replace the battery? I have mine for more than a year but suddenly the front left sensor beeps non stop but I checked 2 times and pressure is right. Inflator shows 5:36 33 psi but shows 27. What seems to be the problem? Please help.
I didn't have to. It takes a minute or two once we get moving for the receiver to pick up the signal, but once it has it we are good. Most of the time I make my kids hold it in the back seat as we get on the road or I put it in my truck bed and then move it up front on my dash.
Thanks for posting this video, including the installation. The video seemed to end before you took it out on the road. Is there another video after this one? Anyway, I just ordered a Tymate M7-3 TPMS for our Jayco 24 FBS Camping trailer. It has new Goodyear Endurance tires on it, and I want the TPMS just to see what kind of temperature and pressure changes occur as I’m towing, as well as to alert me if there is a sudden loss of air pressure. Our next scheduled trip isn’t until late September, unfortunately. But I’m hoping we can sneak a shorter trip in between now and then.
Any update on this product. I bought it and was curious if it actually is working for you and worth the time to install? Thank you I appreciate your time .
100% it is worth it. It doesn't take more than 20 minutes to install once you have everything taken out. We are going on our 3rd year with the original batteries and device with no issues. I highly recommend it if you want the peace of mind while driving and not worrying about a low tire or a blowout.
@@smorervfun thank you for confirming, I just installed them on my camper and they are spot on with the pressure gauge. I appreciate the feedback. Thank you
Good video. I just wish you detailed more about the first thing part where you held both the left minus button together with the middle setting button and how we do that. I've got the dual axle travel trailer also. After I hold those 2 buttons the left front tire starts flashing. Then I hit the right ➕️ plus button and the flashing wheel moves to right front etc. What do we do next. I'd also like to set in 2 spares. Is this possible? I got the 6 sensor kit. Otherwise it's just like yours. So I figured I'd set the L3 & R3 as my two spares. I can't get the standby display to show all 6 wheels. I got it somehow to show 4 but can't do 6. And the instructions just say hold the left ➖️ minus and the middle setting simultaneously, but then what🤔. It's very confusing. Any ideas please help. I'm still trying to figure this out. I'm guessing we need to have all 4-6 sensors near enough to the device in order to get it all working right. Before we even start driving with it. Thank you for trying to help others. Safe travels
I have this in my hands and I am walking through it with you, and I don't understand how you are getting to those numbers, where it is allowing you to put low pressure amounts in lol I was doing fine but you lost me there 😅
Can you make a video of how to replace the battery? I have mine for more than a year but suddenly the front left sensor beeps non stop but I checked 2 times and pressure is right. Inflator shows 5:36 33 psi but shows 27. What seems to be the problem? Please help.
I am guessing you sdid not install a repeater for the tpms???
I didn't have to. It takes a minute or two once we get moving for the receiver to pick up the signal, but once it has it we are good. Most of the time I make my kids hold it in the back seat as we get on the road or I put it in my truck bed and then move it up front on my dash.