I have a guitar and was thinking I could put a 24" scale neck on. 60 bucks, but then I seen the GLarry and think I may just get the whole guitar for 70. I can always check if that scale neck will fit, if not I have a whole guitar. But yeah I've never played a 24 inch scale guitar. I want to see if I like it.
I have owned several Glary basses and gigged with them a lot. I didn’t even have to change the strings on one. The other (fretless) had awful strings on it so I quickly put some flats on it and it sounds great. I had to do some basic setup but I have to do that on every guitar I buy. Modding is fun and this is a perfect platform for it. It’s not for everyone, but those who know their way around a guitar will enjoy it for what it is - an inexpensive beater guitar to have fun with.
nice one brother! i recently got a squier bullet mustang from a pawnshop...it wasnt "perfect" either haha!! but i for the most part got it sorted out... might grab one of the glarry "mustangs" and do a comparison film on these 2 units!
I modded the crap out of mine. It got the stock pickups from my Squier Bullet Mustang (it's a Bullet Mustang-90 now), locking tuners, roller trees, cavity shielding, metal control knobs, and I also had to shim the neck to pitch it back slightly so I could get it properly intonated. That's a common thing with 24" scale offsets. Note; Glarry had to send me a second one because the first one they sent was damaged. I also have a Glarry GST (Strat) and the Glarry GT102 (Ovation imitation.) Both decent guitars. The GST is heavily modded as well.
Very nice playing first sir. I got one similar to this with the 2 single coils. A few mods and this is a beast. Thanks for the cool video and take care.
The clean tone is the ultimate test of sound quality, both for the instrument and the player. Distortion and effects can hide performance defects. I like the sound of that guitar.
I have the same one. I had to shim the neck to pitch it back slightly and raise the saddles to match in order to get it properly intonated. (Leo Fender actually originally designed offsets to have a slight pitchback to the neck.) I also installed locking tuners, roller string tress, pickup cavity shielding and I swapped out the pickups for the humbuckers I took off my Squier Bullet Mustang when I put P90s in it. I use Fender 9s for strings. I don't like that they just extended the pickguard down to the knobs and output instead of using a metal plate like a Mustang. Glarry used metal plates with the GJazz bass, so I don't know why they couldn't do it with the GMF models. It's my 4th Glarry, and I have to say, while these guitars aren't great for beginners because of how much setup they require, they do make excellent mod platforms.
Hi Sean. Sharp strings will necessitate moving the saddles back towards the bridge no? You may find you might have to remove a spring to find room to move a particular saddle rearward sufficiently. Cheers.
Hey Murray. No not from what I’ve experienced. If the 12th fret rings sharp you’d want to decrease the length at the saddle moving toward the neck. Luckily did not need to remove a spring. But that is true, nothing wrong with removing a spring to accommodate should I need to. Thanks for the comment 👍
Great video, man! I just got in a Glarry GST to review, and I plan on doing all kinds of mods to the GST to turn it into the David Gilmour Black Strat. Fender MIM parts are a direct fit if you plan on doing any money mods.
I got one of those guitars. needed all the usual setup and TLC required with low cost made-in-China guitars, but its a solid and good sounding instrument. If you have large (or even medium size) hands, you might find the neck a bit tight, with its 24" scale and fairly narrow profile. But the flip side is that it would be perfect for smaller hands. I use mine mostly with open tunings and with a slide. The pickups sound pretty decent, but I rewired the pots on mine for no tone control and separate volume knobs - so I could blend the pickups with the selector switch in the middle position. Great guitar for small hands or if you just want something different.
@@guywihn1658 I don't know - haven't measured it, and the guitar isn't out right now. its noticably more narrow than (for instance) a Tele or a Strat. a nut with wider string spacing would most likely not work, as the neck itself is rather slender as it tapers towards the headstock.
I got a burning fire a few weeks ago and I absolutely love it best part for me is the neck its so comfortable to play. It was playable out of the box I had to fix a crooked volume knob and the input jack is tight no fret issues at all.Pickups sound good for what they are.I will be putting new locking tuners in it the ones on it suck. I'm also putting black speed knobs on it as well as changing all chrome hardware to black tuners and put black pickup covers on it.I wanna get the new HH burning fire next.
It is a good platform to learn, but remember, a good player could make anything sound good. This is a learning starting point and at this price point it is a good deal to jump in with both feet.
Walmart actually sells the glarry electric guitar so what is the difference they have the same exact guitar what is the difference between buying it from Walmart or glarry if it's the same exact thing
To be honest, any guitar no matter the cost is going to likely need some level of setup on it, at least from my experience. The only real difference between a sub 200 dollar guitar vs a really expensive guitar when it comes to the setup required for them is, the cheaper guitars will likely need more. Don't get me wrong, the parts on a cheap guitar will be cheaper such as the pots and tuners and bridge and such, but the big difference out of the box is going to be how much setup needs to be done... These guitars may be cheap, but I would not recommend them as a first guitar unless you want to learn how to do a full setup on a guitar or want to pay to have a good setup done.. P.S. Always Change the strings on New Guitars, any good setup on any guitar will include a string change. :)
Move the strap buttons. If you have a neck heavy or body heavy guitar you can solve the problem by moving the strap buttons. If the body is heavy move the button on the body a little closer to the output jack.
I bought the Glarry GMF SS and the frets are all bad, every other fret is buzzing really bad. The Nut is huge and spacious and the bridge was installed crooked. I got burned by Glarry do not recommend.
if you bought it thru them just contact them for a return. there actually pretty good about it. my $79 glarry was fine except for cheap parts and wood but it works great unplugged lol. ive chaned everything on mine and put emgs in it cus it was funny and had an extra 81 and 85. i also sanded the neck as thin as i was comfortable doing and its as thin as my jacksons now lol just a different shape, my fault
Some really great guitar licks there. When adjusting the nut, how do you know how much to sand off the bottom? It seems as though there is a "RIGHT" height but if you go beyond that, it's too late. The nut is too low. How do you deal with that?
I got lucky and didn’t have to shave down the nut. Usually if it’s that bad I’ve had a tech work on it since I don’t have the skills. My guess, and remember it’s only a guess, is that it’s just little by little until it sits where you want it. Just gently sanding it until it’s right.
@@SeanPierceJohnson The reason I ask is because I need to learn as much as possible as easily as possible because I'm 70 and have been playing guitar since I was 11. I've had so many guitars pass through my hands over the years that 2 days ago, I decided that it was time for me to learn how to make a difference on a guitar neck beyond simply adjusting the intonation and action. I did a fair amount of research and ordered 6 tool sets from Amazon that includes all the specialized tools I should need to pretend to be a luthier and, amazingly, they all came to about $90. I found a Squier Strat at a pawn shop yesterday for $109 so I was thinking I'd go back and buy that to use as something to practice on. Among the tools I got were files for the nut and the gauges to lay in place on the fretboard that should prevent me from filing the nut too low (but time will tell). My tools are scheduled to arrive today. We'll see if this old dog can learn some new tricks.
As I’ve told others, I may have got it wrong…I’m still learning to do this. I’m just responding to the tuner and what it appears that the saddle is doing.
@@SeanPierceJohnson Well it sounds like you did a great job. Think I'll give the Glarrya try, looks like my Bullet Mustang. Looks like you enjoyed playing it., and liked the neck, and you got it sounding super. Thank's for sharing it with us. Subbed. By the way, do you know if any pickguards out there fits the Glarry ??
I would consider buying a Glarry and replacing the cheap parts, but the foundation is weak. The body is made of soft wood. Simply tightening a bolt on neck can crush soft wood. A shame. The body shapes and the paint job by Glarry is pretty good.
It's basswood just like evh guitars...and the neck is maple. Same as some strats. Mine is just fine. Also the stock pickups sound really chimelike and it's a very resonate body as well.just put some locking tuners and roller saddles with a set up. mine sounds wonderful through a helix 6.
For the same price you can get an infinitely better Monoprice. That's the problem with Glarrys: They're marketing as beginner instruments - when they're anything but. Nut work is the absolute *last* thing a novice should have to tackle.
@@ibberman He plainly said what he did and it can make some difference but not at all how he shows in the beginning of the video. He seems to have an ideal of what he's doing I'm not the best but I do work on guitar's daily.
@@NerfAlice i don't really know what you mean by "an ideal of what he's doing"...i did what i did and got it to play reasonably well and play in tune. i'm also quite clear that I'm a beginner and just TRYING things to make the guitar work. Glarry doesn't pay me, I get an $89 guitar and "good luck"...
@@SeanPierceJohnson Yeah I know I watched the video the whole thing it was a good video I'm not saying it wasn't. But the it went from this to this no it wasn’t gonna be that much of a difference. Not a bad job you clearly know more then you thought tho I seen that.
A distortion pedal. Thats how he got it to sound like that :p 0:13
it was a fuzz pedal actually. but it also needed A LOT of work to get it to play in tune...which was the point
@@SeanPierceJohnsonyeah im just being a smart ass. Nice review i may get one someday
$89 w/free shipping. One of the most comfortable necks I've ever played. Just be prepared to do a little work. Possibly a fret levelling. Easy stuff.
I have a guitar and was thinking I could put a 24" scale neck on.
60 bucks, but then I seen the GLarry and think I may just get the whole guitar for 70.
I can always check if that scale neck will fit, if not I have a whole guitar.
But yeah I've never played a 24 inch scale guitar. I want to see if I like it.
I have owned several Glary basses and gigged with them a lot. I didn’t even have to change the strings on one. The other (fretless) had awful strings on it so I quickly put some flats on it and it sounds great. I had to do some basic setup but I have to do that on every guitar I buy.
Modding is fun and this is a perfect platform for it. It’s not for everyone, but those who know their way around a guitar will enjoy it for what it is - an inexpensive beater guitar to have fun with.
nice one brother!
i recently got a squier bullet mustang from a pawnshop...it wasnt "perfect" either haha!! but i for the most part got it sorted out...
might grab one of the glarry "mustangs" and do a comparison film on these 2 units!
I modded the crap out of mine. It got the stock pickups from my Squier Bullet Mustang (it's a Bullet Mustang-90 now), locking tuners, roller trees, cavity shielding, metal control knobs, and I also had to shim the neck to pitch it back slightly so I could get it properly intonated. That's a common thing with 24" scale offsets.
Note; Glarry had to send me a second one because the first one they sent was damaged.
I also have a Glarry GST (Strat) and the Glarry GT102 (Ovation imitation.) Both decent guitars. The GST is heavily modded as well.
Excellent! I’d love to mod the crap outta this but alas…that costs some cash
Very nice playing first sir. I got one similar to this with the 2 single coils. A few mods and this is a beast. Thanks for the cool video and take care.
just ordered it💪
The clean tone is the ultimate test of sound quality, both for the instrument and the player. Distortion and effects can hide performance defects. I like the sound of that guitar.
I have the same one. I had to shim the neck to pitch it back slightly and raise the saddles to match in order to get it properly intonated. (Leo Fender actually originally designed offsets to have a slight pitchback to the neck.) I also installed locking tuners, roller string tress, pickup cavity shielding and I swapped out the pickups for the humbuckers I took off my Squier Bullet Mustang when I put P90s in it. I use Fender 9s for strings. I don't like that they just extended the pickguard down to the knobs and output instead of using a metal plate like a Mustang. Glarry used metal plates with the GJazz bass, so I don't know why they couldn't do it with the GMF models. It's my 4th Glarry, and I have to say, while these guitars aren't great for beginners because of how much setup they require, they do make excellent mod platforms.
I’m definitely going to consider pickups and tuners.
@@SeanPierceJohnson Locking tuners did make a big difference, but I highly recommend shimming the neck.
Turned it from a Glarry to a Gotham City !! ;) Nice job Caped Crusader !! ;)
haha! indeed i did. thanks buddy
Hi Sean. Sharp strings will necessitate moving the saddles back towards the bridge no? You may find you might have to remove a spring to find room to move a particular saddle rearward sufficiently. Cheers.
Hey Murray. No not from what I’ve experienced. If the 12th fret rings sharp you’d want to decrease the length at the saddle moving toward the neck.
Luckily did not need to remove a spring. But that is true, nothing wrong with removing a spring to accommodate should I need to.
Thanks for the comment
👍
Thanks; really informative, and I appreciate your musical 'stylings'....
I appreciate that!
Great video, man! I just got in a Glarry GST to review, and I plan on doing all kinds of mods to the GST to turn it into the David Gilmour Black Strat. Fender MIM parts are a direct fit if you plan on doing any money mods.
Ooooo excellent tip! That actually helps me with my Glarry GST mods I’m planning.
I got one of those guitars. needed all the usual setup and TLC required with low cost made-in-China guitars, but its a solid and good sounding instrument. If you have large (or even medium size) hands, you might find the neck a bit tight, with its 24" scale and fairly narrow profile. But the flip side is that it would be perfect for smaller hands. I use mine mostly with open tunings and with a slide. The pickups sound pretty decent, but I rewired the pots on mine for no tone control and separate volume knobs - so I could blend the pickups with the selector switch in the middle position. Great guitar for small hands or if you just want something different.
How wide exactly is the neck down at the nut? Would a nut with a wider string spacing be possible?
@@guywihn1658 I don't know - haven't measured it, and the guitar isn't out right now. its noticably more narrow than (for instance) a Tele or a Strat. a nut with wider string spacing would most likely not work, as the neck itself is rather slender as it tapers towards the headstock.
@@guywihn1658 okay - nut width is 42mm or 1 + 5/8 (1.62) inches.
Thoroughly enjoyed this, Sean. Nice samplings of both clean and distortion sounds. 👍
I got a burning fire a few weeks ago and I absolutely love it best part for me is the neck its so comfortable to play. It was playable out of the box I had to fix a crooked volume knob and the input jack is tight no fret issues at all.Pickups sound good for what they are.I will be putting new locking tuners in it the ones on it suck. I'm also putting black speed knobs on it as well as changing all chrome hardware to black tuners and put black pickup covers on it.I wanna get the new HH burning fire next.
Have you got the HH burning fire yet??? Im thinking about getting onw also
I like the Glarry headstock shape.
I actually do as well
It is a good platform to learn, but remember, a good player could make anything sound good. This is a learning starting point and at this price point it is a good deal to jump in with both feet.
definitely. its a small price to pay and probably still better than getting a guitar from walmart or best buy
agreed...I liked the posting very much!@@SeanPierceJohnson
Walmart actually sells the glarry electric guitar so what is the difference they have the same exact guitar what is the difference between buying it from Walmart or glarry if it's the same exact thing
To be honest, any guitar no matter the cost is going to likely need some level of setup on it, at least from my experience. The only real difference between a sub 200 dollar guitar vs a really expensive guitar when it comes to the setup required for them is, the cheaper guitars will likely need more. Don't get me wrong, the parts on a cheap guitar will be cheaper such as the pots and tuners and bridge and such, but the big difference out of the box is going to be how much setup needs to be done... These guitars may be cheap, but I would not recommend them as a first guitar unless you want to learn how to do a full setup on a guitar or want to pay to have a good setup done..
P.S. Always Change the strings on New Guitars, any good setup on any guitar will include a string change. :)
i enjoyed the video and i have a glarry but instead of it being neck heavy it is body heavy
interesting. which one is the heavy one?
@@SeanPierceJohnson I don't know the model but it is a semi hollow Tele style
Move the strap buttons. If you have a neck heavy or body heavy guitar you can solve the problem by moving the strap buttons. If the body is heavy move the button on the body a little closer to the output jack.
I bought the Glarry GMF SS and the frets are all bad, every other fret is buzzing really bad. The Nut is huge and spacious and the bridge was installed crooked. I got burned by Glarry do not recommend.
you really never know what you're gonna get with Glarry.
if you bought it thru them just contact them for a return. there actually pretty good about it. my $79 glarry was fine except for cheap parts and wood but it works great unplugged lol. ive chaned everything on mine and put emgs in it cus it was funny and had an extra 81 and 85. i also sanded the neck as thin as i was comfortable doing and its as thin as my jacksons now lol just a different shape, my fault
Glarry hype!
It lives!
Some really great guitar licks there. When adjusting the nut, how do you know how much to sand off the bottom? It seems as though there is a "RIGHT" height but if you go beyond that, it's too late. The nut is too low. How do you deal with that?
I got lucky and didn’t have to shave down the nut. Usually if it’s that bad I’ve had a tech work on it since I don’t have the skills.
My guess, and remember it’s only a guess, is that it’s just little by little until it sits where you want it. Just gently sanding it until it’s right.
@@SeanPierceJohnson The reason I ask is because I need to learn as much as possible as easily as possible because I'm 70 and have been playing guitar since I was 11. I've had so many guitars pass through my hands over the years that 2 days ago, I decided that it was time for me to learn how to make a difference on a guitar neck beyond simply adjusting the intonation and action. I did a fair amount of research and ordered 6 tool sets from Amazon that includes all the specialized tools I should need to pretend to be a luthier and, amazingly, they all came to about $90. I found a Squier Strat at a pawn shop yesterday for $109 so I was thinking I'd go back and buy that to use as something to practice on. Among the tools I got were files for the nut and the gauges to lay in place on the fretboard that should prevent me from filing the nut too low (but time will tell). My tools are scheduled to arrive today. We'll see if this old dog can learn some new tricks.
If the strings are sharp, not flat, would that not indicate the strings need lengthening by pulling the saddles back?
As I’ve told others, I may have got it wrong…I’m still learning to do this.
I’m just responding to the tuner and what it appears that the saddle is doing.
@@SeanPierceJohnson Well it sounds like you did a great job. Think I'll give the Glarrya try, looks like my Bullet Mustang. Looks like you enjoyed playing it., and liked the neck, and you got it sounding super. Thank's for sharing it with us. Subbed. By the way, do you know if any pickguards out there fits the Glarry ??
@@ibberman i don't. though i must admit i haven't looked into it
I would consider buying a Glarry and replacing the cheap parts, but the foundation is weak. The body is made of soft wood. Simply tightening a bolt on neck can crush soft wood. A shame. The body shapes and the paint job by Glarry is pretty good.
It's basswood just like evh guitars...and the neck is maple. Same as some strats. Mine is just fine. Also the stock pickups sound really chimelike and it's a very resonate body as well.just put some locking tuners and roller saddles with a set up. mine sounds wonderful through a helix 6.
For the same price you can get an infinitely better Monoprice. That's the problem with Glarrys: They're marketing as beginner instruments - when they're anything but. Nut work is the absolute *last* thing a novice should have to tackle.
i agree...it is the last thing a beginner should tackle. but i did state i wasn't sure if this would be necessary
Can't get a 24" scale length Monoprice
I just grabbed one of these at a warehouse for 49 bucks. Did you have to do anything to the nut or was the truss rod adjustment sufficient?
Everything I show in the video is all I did. I actually feared having to remove the nut but it wasn’t necessary
@@SeanPierceJohnson Thanks!
It's the best deal guitar in the history of the world.
lol, I just pulled the chord out and the lower end of the pickguard and screw lifted with it🤣
FTW it was under 80 bucks
Stings can make a difference but it definitely would not make that much difference honestly even fixing the nut.
So what do you think he adjusted?
@@ibberman He plainly said what he did and it can make some difference but not at all how he shows in the beginning of the video. He seems to have an ideal of what he's doing I'm not the best but I do work on guitar's daily.
@@NerfAlice i don't really know what you mean by "an ideal of what he's doing"...i did what i did and got it to play reasonably well and play in tune.
i'm also quite clear that I'm a beginner and just TRYING things to make the guitar work. Glarry doesn't pay me, I get an $89 guitar and "good luck"...
@@SeanPierceJohnson Yeah I know I watched the video the whole thing it was a good video I'm not saying it wasn't. But the it went from this to this no it wasn’t gonna be that much of a difference. Not a bad job you clearly know more then you thought tho I seen that.
@@SeanPierceJohnson Well, you did a great job, sounds great.
GMF Glarry Mustang Fake
?
''Out of the box'' CLEAN SOUND vs ''tweaked'' DISTORTION SOUND!!! Very convincing buddy... Pass...
OR...you could look at it is "out of box and won't play in tune" to "minor adjustments make it enjoyable to play".
G-Larry selling dummy rocks
I’m confused? Who’s selling what? Who’s the dummy? Am I the dummy? Why did you spell it “G-Larry”?
He's talking about Greg Larry, he sells alot of rocks!