Build an Motorized Scooter 40km /h at Home
HTML-код
- Опубликовано: 12 сен 2024
- I USE
43CC MOTOR
I hope you like it
popular video now
How to Make an 4 Wheel Electric Bicycle at Home
• How to Make an 4 Wheel...
There is more to watch here:
/ @gs_diy_ideas
Передаточное число слишком мало, двигатель даже не может выйти на свои максимальные обороты - буксует сцепление. Переднюю звезду на редукторе поменяйте на 11 или 14 зубьев (они продаются) и он поедет
being from an engineering background I would suggest you fit a bigger sprocket to the rear wheel or a smaller one on the reduction box to let the motor reach peek reves putting less stress on the clutch. I would also brace the reduction box to the frame to avoid a twist on the engine mounts as have seen the castings snap off very easily on them engines. and I would fit a spring chain tensioner to take up the slack .its a good build and have subscribed to your Chanel keep up the good work
Great comment… I was going to suggest something along those lines myself as something doesn’t appear right when he first takes off from a stand still.. plus only having a front brake can cause issues at some stage so I would recommend a rear brake as well or instead the front brake 🤷♂️
I watch your videos a lot, I like a lot of your car build, very ok..I learned from you a lot of useful things..thanks for your health for many useful videos ... 👍👍👍
Браво!
Сама реализация на высоте.Но мне здаётся,что пробуксовывает сцепление.Возмите утяжелите колодки сцепления,либо саму пружину на колодках подберите меньшей жесткости.
Перемычка нужна в верху, как у велосипеда, жёсткости раме не хватает.
alter your gearing puy on a frount brake also. needs abit more speed on take off
Can that motor manage to climb a small hill with weight on it?
Otherwise that's a good idea l wish l can have one like that to ease my journey to work
Why not build an adaptor plate for the the rear sprocket> once welded, you are stuck with that gear. Weld a plate to hub, then bolt on the sprocket of your choice since it will wear in time.....
Большой респект самоделки нам уважуха
You're awesome my friend. I think springs will improve the ride, do you think so?
mucho trabajo pero sirvió de algo 👍🏼mil gracias por sus buenas ideas 💡
Beautiful ideas
Fantastic idea and cool content
Lo felicito por su invento : disculpe por favor me puede colaborar con los plAnos o medidas y la capacidad del motor muchas gracias
C'est pas mal mais je pense que c'est un peu risque pour un engin de la sorte bonne chance quand même et merci beaucoup pour la vidéo
Personally, I would not trust the way the rear wheel is mounted. The 100% rear axle comes out after a few kilometers and must be tightened again.
Are you using 2 welders, and is that a Honda chain saw engine, it's a good idea.
Yes I use Mig and Tig
Engine are not honda
Thank you
Engine is wat please ?
is it street legal do we need a license for it
All this work to use a 1"/25.4mm headset, why? I'd want the bigger head tube to get bigger welds and more support with bigger bearings. Better selection of stems as well. Am I missing something?
Muy buena idea y creatividad fácil de realizar Gracias
Yo quiero fabricar algo asi
Не помешало бы в этой самоделке добавить нормального глушителя.
Coolest kid on the block
😊👍👍
Breaking should be safe in the rear tire not in the front
Поймает полиция, посадит и будет охранять🤣
Incorrect gear ratio.
blanke lak in de handvaten spuiten gaat die er zo op en blijft hij ook gelijk goed zitten als het opdroogt
I wanna see the 1800w motor on this, the acceleration and torque with the gas engine seems kinda crappy
Very. Needs to gear it down about half.
excelente proyecto, felicitaciones quisiera saber si el motor que le colocaste es de podadora o algún otro, saludos y sigue adelante
C’est une debrousailleuse
did u put fresh gas on that it needs 2t gas
សម័យនេះហើយ. នៅមានម៉ូតូសម័យអីុត្លែរទៀតន៎៎ុ...
.
Super mișto.Baftă și noroc.Multe succese.🖐👍🏼👍🏼✋☝🏽☝🏽☝️☝️🙌🏼🙋♂️🙋♂️
Bravo.Mulțumesc pentru aprecieri.O noapte faină.Succese tot mai multe.🖐🖐👐✋🙋♂️👍🏼👍🏼☝️
เครื่องกี่ซีซี
Salom tula bak bilan qancha klometr yuradi
Have a variator of speed? Good.
Крышечку от бака забыл открутить когда под ним варил. Шов ровнее положили бы в больничке.
швы от полуавтомата- в финале пугают.... ))))
профи- и по звуку думаю поняли....
Que tipo de motor es
Did you move the drop out you welded @ 2:03?
what is the name of the disk thing that u put in d wheel
Salut est-ce que ton moteur ces un deu temp
I like the simplicity of your design. Id like to see a trike like this like an upside down Y where the center post holds the big/drive wheel, and the trailing ends of the Y you stand on. Oh and no brakes!
"I've seen the light, and it is beautiful."
First weld to break? Seat post!
...during the wreck where the front snaps off. There's a lot of stress on both, and under serious impacts and vibration.
Sounds like the clutch is slipping all the time 👎
How much CC?
you have your kill switch wired backwards. 1 is supposed to be on, 0 is supposed to be off. Just sayin'.
Good
mets un petit engrenage dans la roue car trop de couple mais faible vitesse
When you cut would you keep out your hand under the electric cut ? /// You realized a thing that for law can't run on the route , and further without spring .
Gear ratio?
sounds like its overevving
@@josesoto4440 no way that two stroke has a lot more it is geared wrong he needs a smaller gear in the front and a bigger sprocket in the back and it will rev higher and be faster
@@josesoto4440It is never getting to full clutch engagement because there is not sufficient reduction between the engine and the wheel. It needs approximately 20:1 overall.
xo de bola luiz brasil
Que velocidade
Too noisy for the speed
I’ve seen a few scooter attempts on RUclips but most there gear ratio is totally wrong
how march my frend i need it
I love all the armchair mechanics! With there negative comments! Prolly live in mommy's basement and play D&D on every other Friday!
Ain't never built anything 'cept a bong! But they gonna tell you about your shitty seat post weld and improper gear ratio! Lmfao! Good job man keep on keeping on!
❤❤❤❤
Parabéns trabalho perfeito.
Что то звездочка доверия не внушает.
Please do a diy video on converting a knee scooter into a seated electric scooter. Please pretty please! I’ll bet you’ll go viral!
I would want some foot pads , so to brace a little better.
Lslalx
Odlw
13lx!ld!sx
👍👍👍👍
Ótimo
Pouco estabelidade.
Que motor fraco mano, 😂
😊
Por anda tan suave he visto otras en mas mal estado que pasan los 40K/H
How much is something like this world cost me.
Not sure but around $150
ทำให้สักคันคับ
30 kph no 40
Not at home, but rather at a well-equipped workshop!
Meanwhile, it is too noisy to be used in a peaceful political situation.
My turn to scooter
Больше орет чем едет
Тяга не хватает, туда нужен редактор 5:1
Молодец хоть один по делу написал, но ему рнужен контента.
It looks underpowered
gewoon lassen boven een benzine tank ahahahaha
banada yolla😭😭😭😭😭😭
Sounding too much
clutch can't handle it
really slow
Bonu camina dai
ต่ำโพดตกหลุมทีจำพื้น
обороты надо уменьшить чтобы сила появилась. кричит не едит
Q bosta heem kkkk não sai do lugar 😂
пружину сцепления растяни децл
Que tipo de motor es