The Absolute WORST Lift Kit Install I've Ever Seen!
HTML-код
- Опубликовано: 4 окт 2024
- PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitap...
HYPERLITE UFO LED HIGH BAY LIGHTS:
amzn.to/3593tEv
HYPERLITE 200watt LED FLOOD LIGHT
amzn.to/2SikJVb
iYing 10.1" Head Unit:
amzn.to/3c5CfD4
FENIEX CANNON LED HIDEAWAY STROBE LIGHTS: amzn.to/38bCfOP
FENIEX T3 GRILLE LIGHTS: amzn.to/37ZXDpM
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
LED RECESSED LIGHTS: amzn.to/3a4boqc
THE BEST MILWAUKEE LED HEADLAMP: amzn.to/2KmuywY
CONVERT YOUR CIGARETTE LIGHTER TO USB: amzn.to/2IH460l
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
www.instagram....
Email:
Dmaxryno@hotmail.com
Join this channel to get access to perks:
/ @dmaxryno
Click here to devour some delicious jerky!
workforitapparel.com/collections/workforit-jerky
Just ordered 2 more bags
The whole reason I refuse to put a lift on my truck. I don't have any "Zachs" in my life and I've seen some of the work around here and I'm not too impressed
I work at a custom shop and man some of the stuff I see come through is just ridiculous
Just install it yourself
If you can get access to a garage or do it in the summer doing it yourself is not that hard, just have some extra money aside so as you're going through you can upgrade other things you see while doing the lift
You can just do it yourself if you don’t trust others lol. That’s what I did, and I had to do a bunch of custom stuff since I’m the only person in the world that has my setup. It’s 100% possible with enough research.
Ryan, you should do a video of Zach explaining how he does his alignments by hand for the crazy builds he works on.
The shirt he's wearing describes him and that truck perfectly lol "Lucky"
This is what I liked about the BDS lift I put on my truck 10 years or so ago. It was a 6", but it had room to go higher and the factory geometry was pretty close once it was installed. That's really important on an IFS truck. My truck rides great (still have it all these years later) and looks great. Way more money (at that time) but was the right choice.
19:19 It’s not always good to blast people or shops on social media for things because things happen. But in this case people need to be warned of whoever did this lift kit just from a safety stand point. If they did it once they will do it again
I think that guy needs to take a lot of pictures of the hack job the other people did on that lift kit and how they nearly ruined his truck.
Then he should tell them unless they give him his money back he's going to post the pictures online.
Thanks for restocking the bacon jerky. I love it and ordered 2 more bags. 👍
You know it's a good day when some real big fish is blasting in the background 👌
Dang I don't even think Evel Knievel would have drove that truck the way it was 🤷🏽♂️🫣🫣🫣
Zach’s such a monster mechanic ! Man I wish I could have someone like him to run my shop 🔥🔥🔥🤘💯
You can trickle charge each battery separately that’s what I have to do after the winter when mine sit for 4months without use
Zack should do his burnouts on Carpet. It heats them up just as well but doesn't tear them up like burning out on asphalt does.
Yikes, hope you guys did a nut and bolt check in the rear too!
Ryan, Zack, Chris and Sergio,
Merry Christmas to you and all your families. 🎄🎄🎄
It’s amazing what Zach can do
12:07 ignore the bolt- the brake lines is completely stretched.
The extend stainless brake lines are under $100 and none of theses companies even bother to sell them, or suggest them. Just send people out the door with a 2” drop bracket and hope the line doesn’t fail.
Funny how Ryno older brother finally surfaces on the channel. With crappy lift. He must be the bad son trying to go right. 😂 😂 Merry Christmas .
Zach great choice on rc batteries dude! Gens ace is where’s its at! Ryan if you need any help with rc get at me
Love it merry Christmas 🎄 love see you and zach make the world better one truck at a time
Scott is the future ryno 😂
Question I just bought my first Duramax 2008 love it I've always had gassers how much to do a 4inch lift the right way I'm impressed great video again thanks man!!!
Hit up Nick at Scovelmotorsports.com he can get your pricing and point you in the right direction!
The Kryptonite leveling kit rides better than stock. The CV angles are not terrible and the truck drives great. I have the stage 3 leveling kit on my 2019 with the sway bar extensions.
(GOLF CART) I did the same thing with my ezgo. Each battery has to have at least 6 volts each. I had to charge my batteries individually and saved them. Love your vids. Good Luck
At least 6v each for the charger to work.
They’re 8 volt batteries
For sure. I'm saying that each 8v battery needs at least 6v in them for the golf cart charger to work. At least that is what my g cart charger needs to work
This is why my vehicles stay stock. 🤣. No hate to anyone that modifies their trucks
I did a level kit and I have been happy with it. I guess I don’t 4 wheel much though
I wish I afford a lift kit for my 2 gen Ram 3500 ..,... Always, always majorly saving my life motivational to me......
Zach is my hero!
Zach totally missed the joke you and Chris were going with at 14:00 lmao hahaahah 🤣🤣🤣
Zack is just like my son with R c's He says get a quarter scaleDragstern rock crawler he'll really like them
RaptorR Build Next!
You need to jump the golf cart battery's with the charger plugged in. I had this same exact thing happen a few weeks ago. Now it takes a charge
picked up a 2500hd with a tuff country lift on it, seller didn't know the lift size but thinks it's 6inch.
My cv angles are pretty close to factory, i have no clue what year it was bought. The boots on my front shocks are all squished. Man I wish I had bought a stock truck even though it's not bad - but I hear no positives about lift kits so it scars me. My crossmember drop from bolt to bolt that you mentioned is 4", so if it's a 6" lift..it's maxed out huh
That 4 inches looks very tall and well worth it… 😅
Haha when i first saw the truck, i was blown away that it was a 4” drop down
@@americanduramax yeah I not sure where Ryan gets his tape measure but I don’t trust any of that Southern California stuff 😂
I wonder how many other trucks they screwed up like that ?
I hope nobody got hurt if their other customers had a "high-speed come apart" on the freeway.
There is a screw in the front driver side tire. 27:42 you can see it!
Probably a really short screw but definitely not a rock
Tell Zac put a 3.5 turn motor in that dragster
That shop didn't give any bolts 🔩 enough uga dugas. 😳
Can Zach do work on my truck. I have a 10 inch lift kit I want to put on my LBZ. How do I get in contact with you.
More ranch videos!
How did that jack feel lifting those big trucks.
You truck the batteries into charging. Just it takes a very slow deep charge and doing each ine individually. Had to do it to my batteries in my golfcart. They have been fine since afterwards.
Did that shop get the tire tech guy to install that other lift? Yeesh😬
Make sure the water in all the golf cart batteries are full. Disconnect all the wires on the batteries and put each individual one on a trickle charger for a few minutes then connect all the wires back and plug it in like normal to charge and it should get it going
Sweet , getting some jerky now !
You can independently charge each battery with a car charger for about 2 mins and then they will have enough juice for your golf car charger to work.
Ryan, you can save them golf cart batteries. Oreillys/Napa sells battery acid in a box for like $13. All you gotta do is look up a RUclips video on it. I have saved 1000s doing this.
You should look at my titan
Thought that was ryno from the future 😂
I could not find the Beef Jerky on the website I guess it is sold out.
It’s still in stock! Here ya go! workforitapparel.com/collections/workforit-jerky
@@DMAXRYNO I guess I didn’t look hard enough
First via my laggy shitty 30 dollar Walmart phone in my shower after 10 hours of welding
Awesome....(safety supervisor)....in (sweats and slides)....lol
What were Zack's numbers on his drag truck?
I bet that truck driver trying to sleep in his truck while you were doing the drag race with the RC car was loving all that noise and loud talking and the bright light.
Don’t you have you rotors install backwards? 😅
I had a dodge Dakota the someone cranked the key with stock shocks and ripped the shock bracket off
Safety super😂😂😂
What about ready lift?
You need to charge each battery individually the plug the charger in make sure there’s water in each battery
Like you said Ryan, you Gotta do research on the kids, but I think as well he should win cheaper like a rough country and then later upgraded to the more expensive lift kit. I mean rough country going to get the job done make you look good and probably be more true to the size it says online then whatever he got
The charger needs to see a certin voltage to charge you have 6 8volt just charge each battety with a 12 volt for 5 to 10 min then plug in the vart charger it will pick it up ,
golf cart chargers have to have enough juice in the batteries to kick them on. You need another 48 volt golf cart to jump it off with to get the charger to kick on
Time to paint the golf cart
Damn. Poor guys lift is messed up and if you go to 27:41 he’s even got a screw in his tire.
So if I wanna level my truck which I do the right way would be to go with a 4inch lift kit ? And level it with that
I know you don't want to blast nobody but dang a job like that might deserve it that way people know to watch out in that area and just in general.
Where’s snow?
My 05 suburban is like that. The owners before me through in this cheap ass 3 inch lift kid with spacers in the back and in the front really nothing. I believe it just has torsion keys that are jacked up. Anyways mine is AWD and the front end feels very loose and sloppy and I’ve replaced everything. My cv axles are at a shitty angle. The only thing is that it’s on 20s and idk if they will clear if I drop that lift off. I know they will fit it’s more about how much will they run when turning.
Hi Dmaxryno.
Question I have a 2018 duramax I got install the 2"5 leveling kit but I feel like is a little rough, do you have any other option to make it smoother according with your experience? Thanks and happy new year
Still can’t find Sergio’s website
www.iep-usa.com it’s word for word what I say in every video lol
meats back on the menu bois.
Too bad you're in LA or I'd help get you those 6V batteries at cost here in Colorado
I put a “budget” 3 inch lift on my ram 1500 and it rode like monkey shit. I got the kit with the pre loaded lift struts and upper control arms and all the blah blah blah. Took it off recently and my god it’s night and day. Point of this is to just save your $ and get a premium lift.
I don’t get why your batteries die. I can leave my jeep out -12c for a month and it starts right up
See I kind of miss up on my jeep zj 4 inches lift kit it drives fine but there's something not right about
HOW MUCH TO LIFT A 99 OBS SUBURBAN
Y GET AVERITHING LIFT KIT
Ryan and/or other subscribers. I own a 2019 2500 GMC Sierra. I’m a paycheck to paycheck guy that is the only income for a family of five, but I want to lift my truck 6” and out 35’s on it. What would you suggest. I can’t afford the best but don’t want cheap junk and have the issue this guy did. Thanks in advance.
I learned the leason the hard way unfortunately
Dmax….I bet my battery charging setup has a good chance to recover your batteries. I’m local to you….I’ll reach out to someone you know as I’m not sure how to contact you
I sell batteries what you can do is have a 12v battery charger. Than you are going to get connectors to connect the batteries. You are going to go from pos to neg pos neg etc. you should have two open spots obviously pos and neg. Leave them overnight and than it should work. The reason you connect them because than it technically makes the battery a 12V you should be at 6.30 volts but you are good at 6.26 too
Awesome 👌
One reason most customers don’t want to go to a 4” lift kit or higher is because they don’t want to cut cross member’s where they are not reversible
Some trucks yes, 11-19 & 2020+ trucks can have the crossmember bolted back in, drop the cut off pieces in place & weld.
That one crossmember is there for lateral support but do not need to be there. I know from experience.
Cost of parts & labor is much cheaper on a leveling kit if you think you may go back to stock, i can agree with that
I guess I'm the only guy wondering why the owner chose cv joints instead of buying a 4 wheel drive front axle. If he plans on wheeling this truck he should bring a extra set of cv joints
Idk what the heck happened yt just stopped recommending your channel
I like everything they did here, except the steering drop for that lift. Not the kryptonite stuff, thats good. But lifts that use a drop center link are junk. You're adding lever length to your Pitman and idler which are already junk in these trucks.
What would you prefer? My 14” bulletproof lift has a similar setup (but beffier) and it’s been rock solid
@DMAXRYNO ok I guess I should clarify. There is no "good" solution on something as big as a 14" kit. There is going to be a compromise to go that tall. But doing a 6" I prefer something with a knuckle that locates the tie rod higher up. Still keeps the linkage straight and doesn't have heim joints to fail. I'm not saying it's absolutely the wrong way of doing that, but I've been doing lifts for 15 years and I've seen alot of those come in with broken or worn heims and loose Pitman and idler and the steering is all over the place. But if you eliminate that drop the Pitman and idler will last longer and 50% of the moving parts to fail.
So what was the speed on the final drag race with the remote car?
42 or 43 mph
I hope he didn’t pay for that horrible installation, that truck was a death trap.
Workforit!
your from eastern ohio, so we were neighbors at some point? you wouldnt want to be here now thats for sure
I'm in southern Ohio and it's just raining here rite now
@@southernoutdoorboyz5027 here too but closer to lake than you, and we are supposed to get hammered overnight
Did dedgit build that truck lol we all know he never tightened up his bolts (I know i spelled his name wrong)
@squarebody_tig
Lmfao 😆 🤦🏽♂️ maybe he did
What a mess
We he said call a buddy ni. Where you about to say the n word. Lol
Notification squad in the house!
Ryno is the beef jerky halal
27:42 screw in tire
Hi
Hope a shop didn’t do it if so you should call them out could’ve killed people
That was really sketchy
I mean I love y’all but that’s a sold axle truck to start
Whatcha talkin bout Willis
Please tell people where not to go.....