Thanks, yeah, 20,000 if I could only get 1/4 that many views on each video it would be great. but then I am retired and do have other sources of income. I know your channel is doing good. scrap has been slow the last few weeks. but things will pick up when it get's hot outside. I do have some I need to get picked up but with all the rain we are getting I don't want to get the truck stuck in someone's field. Take care Paul
This cutter is working out pretty good so far and it's good that you are getting that corn head out of the way thank you for sharing this with us six stars brother
Hello again my friend. I do believe you are going to have to live to be 150 years old. Why you ask? Because you have enough projects to keep you busy for that long.😂😂 Well I enjoyed the video and as always I enjoyed stopping by.
yeah, I like to stay busy, I like it when the grandkids say I'm board, I don't have that problem. found another supplier for barrels yesterday so going after a load this evening. 35 barrels and he is only about 10 miles from home
Good morning my friend and family. What is the weather like in Oklahoma? It going to be in the 80s all week long. This is your friend from Greenville SC Ed Miller
I keep having problems with my plasma cutter. I put a new tip (the inner one) on not long ago and I cant get it to fire no matter what any more, even though there seems to be no visible damage to it. I stuck a new tip on, it fires, but sometimes it takes forever to great and arc and I need to turn the air way down to almost nothing, but the performance is so inconsistent I have trouble identifying the cause, All i know is, by the time I get done fighting with it I coulda done the job with a grinder/cutting disk, it'd have been faster, simply because I cant get it to work when I want it to. I know your vid is obviously sped up a bit every time you touch it it fires off. sometimes it takes 5 to 10 seconds to finally get it to go, it's annoying.
this one runs about $250.00 I think they have a coupon check box for a little off the price. the old one quit the other day. I tested the switch in the handle and it checks out ok. I need to check continuity on the plasma ark wire. that what I think it is. it has a bad spot about half way in the line I may have to locate the bad spot and splice it back together
Almost 20,000 subscribers. That is nothing to sneeze at. Good stuff
Thanks, yeah, 20,000 if I could only get 1/4 that many views on each video it would be great. but then I am retired and do have other sources of income. I know your channel is doing good. scrap has been slow the last few weeks. but things will pick up when it get's hot outside. I do have some I need to get picked up but with all the rain we are getting I don't want to get the truck stuck in someone's field. Take care Paul
Hopefully you and your family stay safe and healthy through all the bad weather in your area..
so far so good, a few storms forming now. but not expecting much today. the next 2 days may be worse
This cutter is working out pretty good so far and it's good that you are getting that corn head out of the way thank you for sharing this with us six stars brother
cut all of that up before the first tip blue out. the little cutter did a great job
Hello again my friend.
I do believe you are going to have to live to be 150 years old.
Why you ask?
Because you have enough projects to keep you busy for that long.😂😂
Well I enjoyed the video and as always I enjoyed stopping by.
yeah, I like to stay busy, I like it when the grandkids say I'm board, I don't have that problem. found another supplier for barrels yesterday so going after a load this evening. 35 barrels and he is only about 10 miles from home
Alan, you might want to try and sell those gear boxes. I have the same plasma cutter still in the box. Thanks for the upload
that is an Idea on the gear boxes. they are John Deere and they should work on many different John Deere implements
Seems to be cutting recalling good for a inexpensive plasma cutter
Wow that little plasma cutter is doing great! That shocked me. I had one and it wouldn't cut a compressor open ! Nice job Okie
yes this little cutter is going great. cutting some nice thick stuff, I cut a lot of metal before the first tip burned out
@@Okiescrapper awesome!
Hope you are okay with the tornadoes hitting around OKC!
so far the one the other night that went by Cole was the closest one to us and it was about 4 miles away
Awesome video thanks for sharing
you are welcome
Good morning my friend and family. What is the weather like in Oklahoma? It going to be in the 80s all week long. This is your friend from Greenville SC Ed Miller
I'm in Worcestershire in the uk and it cold and raining until further notice 😢
running 80's here, getting lots of storms this way, may get some tonight and the next few days
next time you cut, do it at normal speed. also curious after 6 months how its still working?
it is still working good, I cut up a bunch of metal about a week ago
It’s Thursday here. 😂
it's Sunday here now. I am way behind on replying to comments
I keep having problems with my plasma cutter. I put a new tip (the inner one) on not long ago and I cant get it to fire no matter what any more, even though there seems to be no visible damage to it. I stuck a new tip on, it fires, but sometimes it takes forever to great and arc and I need to turn the air way down to almost nothing, but the performance is so inconsistent I have trouble identifying the cause, All i know is, by the time I get done fighting with it I coulda done the job with a grinder/cutting disk, it'd have been faster, simply because I cant get it to work when I want it to. I know your vid is obviously sped up a bit every time you touch it it fires off. sometimes it takes 5 to 10 seconds to finally get it to go, it's annoying.
Are you using 110 or 220. Really enjoy your videos.
I am running on 220. if you run on 110 you will need a 30-amp breaker
Hello my friend and family. This is Ed Miller from Greenville SC. How far are you from the city of Oklahoma City? It is raining here now
I am about 25 - 30 miles south of OKC
does this use the same plug as the dark blue one? Or will i need to rewire my service
it uses the same plug, and the same consumables
😁
#happyscrapping
#happyscrapping
How much was this cutter? Is it better than the old one and did the old one burn out?
this one runs about $250.00 I think they have a coupon check box for a little off the price. the old one quit the other day. I tested the switch in the handle and it checks out ok. I need to check continuity on the plasma ark wire. that what I think it is. it has a bad spot about half way in the line I may have to locate the bad spot and splice it back together
@@Okiescrapper same 220 plug as the old one?