lol was created back when i was like 23 its 7 yrs ago by our russian old dude.Have seen video on youtube of whole process he showed (10-15 mins) and asked our government to help in development,that was so cool and innovative.everyone lold at his idea. someone made it possible
what about the little pieces that come off and break off? it'll wear off and degrade down to microplastic bits and pollute the water supplys and pollute the earth worse.. and would animals eat it? and would the summer heat make the plastic release toxicness into to air?
Plastics less than 2.36 mm mesh size is used here. There is no possibility of plastics coated with bitumen and compressed into aggregates to come out of the structure. Plastics are inert and does not pose any contamination and health issues. It will remain within the soil system like rubber particles which may happen in case of rubberised roads.
Chinese already had a plan of a 100% plastic but indian already find out a solution of composite mixer of tar and plastic really it's a big thing tropical roads will be water proof then will last long and good traction surface as well .
But in russian road rubber roads in too cold will lost grip its for rainy area solution not good for too cold are because in Russia you need to put grit on the roads but if road got plastic it's skidding will be high and loose traction as well . Plastic roads is kind of waterproof solution so where submerge roads under water roads will be good at that way .
Thank you for your lovely vedio are so good it's a someone inspired by Maharashtra Mahanagar Palika to installation of all types machinery for recycled plastic scrap are use in Road making with coaltar so durable is like strong enough for ten years and unemployment question doesn't arise Which please note. Thx 1.8.18
@@pranjalpurwar611 Hi I am working on this project use of plastic aggregate in concrete & bitumen my half work is done but I need help that in what proportion we should use different plastic like PP, HDPE, PET, LDPE if u have worked on it please help me I will be highly thankful to u all.
When this is heated throughout the hot summer days, does it give off any fumes from the plastic? Also, how does it fair with gasoline or oil drippings from leaky vehicles?
Hot summer days' temperature on the road surface may go upto about 65 to even 70 degree centigrade. Melting point of plastics are more than 110 d.c. Hence there is possibility of its evaporation. Rather it stops softening of bitumen roads.
Lol! Forgot about UV and friction from vehicles? Even if it has UV resist additive, you cannot fully UV proof it. Now not only fishes will eat microplastics, land based animals will have them soon. Humans will also inhale these microplastics when they drive through these roads.
Yeah bloody solution laying on a simple idea never think any body before if plastic going with tar then road will be water proof but it's good in rainy area too road will be stronger .
What is happening while adding shredded plastic with cold metal, as the vedio shows. It is burning in plant, burning plastic in public place with public money. It is possible in pug mill only. Pl display correct procedure. Shredded plastic to be padded in hot aggregate, mix well and then add bitumene. HM plant can not be used for this purpose.
Plastic at 200+ degree C can produce quiet a bit of harmful gas but at 160-170 degree C as the video says it just melts with minimal harmful gas production
plastic is in basic an oil product and can be remade as new plastic bottles or bags u only need the capital to do it... and by the way to use plastic in asphalt is not recommended if u want it to be durable
An Amazing and clever way to Recycle wonderful video
Scotland is now beginning to look at this. Hoping to see a lot more of this world wide. Thank you India for leading the way. Om
This technology used with the help of each Indian citizen can make PM ji's dream "The swach Bharath" a reality.
good to see that it is used for the better use ,we need to know about this road how it would be over the period of time.
Yes, we could do that here in the U.K . The polymers would strengthen our roads = Less pot holes !.
lol was created back when i was like 23 its 7 yrs ago by our russian old dude.Have seen video on youtube of whole process he showed (10-15 mins) and asked our government to help in development,that was so cool and innovative.everyone lold at his idea. someone made it possible
Thank you India. Now we just the need the rest of the world to catch up.
Sadly, the oil industry will fight it, in the US.
I think it was the UK who started it .. India adopted it.
@@russelfernandes7469 no indian iit proffesor from the most prestigious collges made it
what about the little pieces that come off and break off? it'll wear off and degrade down to microplastic bits and pollute the water supplys and pollute the earth worse.. and would animals eat it? and would the summer heat make the plastic release toxicness into to air?
Plastics less than 2.36 mm mesh size is used here. There is no possibility of plastics coated with bitumen and compressed into aggregates to come out of the structure.
Plastics are inert and does not pose any contamination and health issues. It will remain within the soil system like rubber particles which may happen in case of rubberised roads.
Chinese already had a plan of a 100% plastic but indian already find out a solution of composite mixer of tar and plastic really it's a big thing tropical roads will be water proof then will last long and good traction surface as well .
great idea
But in russian road rubber roads in too cold will lost grip its for rainy area solution not good for too cold are because in Russia you need to put grit on the roads but if road got plastic it's skidding will be high and loose traction as well . Plastic roads is kind of waterproof solution so where submerge roads under water roads will be good at that way .
Thank you for your lovely vedio are so good it's a someone inspired by Maharashtra Mahanagar Palika to installation of all types machinery for recycled plastic scrap are use in Road making with coaltar so durable is like strong enough for ten years and unemployment question doesn't arise Which please note. Thx 1.8.18
NIC VEDIOS
sir may I know the cost for construction of 30-40 meter of plastic road ? Because I want to do that as my major project. please reply
I AN ALSO GOING TO DO THIS MINOR PROJECT ON PLASTIC ROAD TOPIC, IF YOU WANT TO HELP ME, WHATSAPP 723987625. I NEED HELP
can you send me your contect number am intersted this type project
@@pranjalpurwar611 Hi I am working on this project use of plastic aggregate in concrete & bitumen my half work is done but I need help that in what proportion we should use different plastic like PP, HDPE, PET, LDPE if u have worked on it please help me I will be highly thankful to u all.
what about the smoke ? when we burn the plastic isn't it toxic ? is the production sustainable ?
Plastics emit dioxin and furans when burned under 800deg C....good question...
The plastic is not burned but it melted and coated with the stones.So there is no question of fumes. ok
It is heated in the absence of oxygen so it is not burned you see.
Plastics are not burnt in this process, it is melted on the surface of the aggregates. No toxic fumes are generated.
When this is heated throughout the hot summer days, does it give off any fumes from the plastic? Also, how does it fair with gasoline or oil drippings from leaky vehicles?
Hot summer days does not exceed 40 degree. Plastic does not melt at less than 150 degree. So no fumes in summer.
Hot summer days' temperature on the road surface may go upto about 65 to even 70 degree centigrade.
Melting point of plastics are more than 110 d.c. Hence there is possibility of its evaporation. Rather it stops softening of bitumen roads.
Do you have contact information for your engineering reports on this? We are interested in duplicate of this project in the Philippines
did you find our anything in regarding this video? kind regards
can we use polyester film waste here??
Amazing
ممتاز
Lol! Forgot about UV and friction from vehicles? Even if it has UV resist additive, you cannot fully UV proof it. Now not only fishes will eat microplastics, land based animals will have them soon. Humans will also inhale these microplastics when they drive through these roads.
Lol 😂😂 so tru
how the road and the project looks like 5 years later please
It's a road laminating very good for roads life span .
p
Riad Ahmed 👍
thats like civil engg
it good idea, if have document relate please share me.
Yeah bloody solution laying on a simple idea never think any body before if plastic going with tar then road will be water proof but it's good in rainy area too road will be stronger .
this will make lods of fluds as the water will not be absorbed by the road material
+Kris Ipad They can arch the roadbed and/or groove it.
engineering
doing all this but can't even make a road lasting 3 months during monsoon
What is happening while adding shredded plastic with cold metal, as the vedio shows.
It is burning in plant,
burning plastic in public place with public money.
It is possible in pug mill only.
Pl display correct procedure.
Shredded plastic to be padded in hot aggregate, mix well and then add bitumene.
HM plant can not be used for this purpose.
Plastic at 200+ degree C can produce quiet a bit of harmful gas but at 160-170 degree C as the video says it just melts with minimal harmful gas production
Check out Virgin's VOOM 2016 UK start-up winner MacRebur - INNOVATIVE PLASTIC ROADS - Stronger, Greener, Cheaper Roads! www.vmbvoom.com/pitches/innovative-plastic-roads
so they basicly add 1-4% oil product to the existing 0.0566%... thats a waist if u ask me t 66% oil% oil
So we can send the worlds plastic waste to your house and you deal with it.
plastic is in basic an oil product and can be remade as new plastic bottles or bags u only need the capital to do it... and by the way to use plastic in asphalt is not recommended if u want it to be durable
"betun"
Are these road rollers used NO only it is used for temporary wait fixing don't make people stupid do proper work , work will speak and not People