Ben. I love this series and collaboration with your brother. I was hoping you would get him to fix it, the frame master!! Somebody is gonna be happy with this stang.
@@Charlton2010 Correct. OEM stands for 'Original Equipment Manufacturer'. Typically OEM parts fit the best, but cost the most. In this case, I think they were around $150? Easy decision to buy OEM parts here and the results looked really good.
As a person more than twice your age, young folks, think they are invincible. Please wear a filtered mask when you do bodywork as your future respiratory system. will thank you.
and remove the tint from the windshield.....unless his new wife is the beneficiary on his life insurance.....might as well drive at night with sunglasses on.
Ha ha.. mad Max.. hope he and Danny are doing good. Miss them doing work too. Ben you and Yuri/Nate killed it. Car found the right set of hands to fix it. Stay safe and be well. Hod bless
Love the video, my cousin and his three kids are in body repair business. They learned by going to work with my late uncle. Shop asked where did you go to school to learn trade, all hams on.
I have a 2019 GT with PP1 and the bells and whistles besides magnaride. Had a teenager rear end me at a red light but luckily they didn't total the car and it was an easy repair. I'm glad to see you keeping this beauty on the streets still. It's an amazing car. BTW maybe when you get the motor running. Test out your exhaust solenoids if they are sticking. Rev up to 2.2K RPMs. Let off and listen for a slight metal rattle at the front of the motor by the cam phasers. Good to replace that now while you have everything apart.
You're such an inspiration to other DIY'ers. I'm about to get my first compressor with paint paint gun and watch your videos all the time to learn as much as I can.
Yes I think maybe also one size higher profile would look better on those (slightly weird) rims? Maybe paint the grille pony to match the wheel colour might help…
Ben, thank you for sharing the video. I know it’s a PITA to video, do the repair work, and then after a hard days work, sit down to edit the footage. We appreciate the content and your hard work. ❤❤❤
that's Rossville Blvd for you... Always some crazy or dumb shyt happening. but while your there Try to hit up Chubby's BBQ! I haven't eaten there in a couple of years but it's some damn good southern cooking! southern style meals and all. small little joint thats been there forever but for the money it's great!
The best part is you don't take them out and beat the Shit out of them, can you imagine driving something 1500 miles in one day just to get the miles needed for break-in so you can beat the snot out of a 100K PU.
ben you gotta wear some PPE when doing sanding, grinding and painting. we dont want to see non-stop coughing and one-eyed ben in the future. stay protected bro!
The contrast between the black and gold/copper wheels is great. Black wheels wouldn’t be good at all. Those particular wheels aren’t to my taste but something nicer in a similar colour with additional accents would be cool.
Thank you for your videos - We watch with pleasure and always look forward to new releases !!!!! Best Regards Chertanovo Chopper’s Custom Club ….. Moscow City 🌆 ….. Russia 🇷🇺 …..
Ben the looks of that Mustang you don't need to do much to it I'm not FORD fanatic but I will say that your Mustang look good pretty much as it sits maybe like you say the Wheels Black but all honesty even the Wheels don't really look that bad now and no don't put one of those huge Spoilers on the back it's fine as it is it is a sharp CAR OH and no don't lower it either anywhere I'll give it a BIG THUMBS UP
@George-dy3pt he mentioned maybe getting someone in to do PDR last video. I just think it's something vtuned has the patience and skill to do himself - would make these quick flips so much easier. Painting adds a day or two to any job.
I'm sure you kno this but you can get flat valve stems to replace that valve stem sticking up in the barrel of the wheel so those rims will fir on the Ferrari!
What happens when u weld tabs when the opposite side is unreachable? How can you prevent rust from the opposite side, where heat has been applied and most likely rust will form? More power to you VTuned!
solid work ben!
Ben. I love this series and collaboration with your brother. I was hoping you would get him to fix it, the frame master!! Somebody is gonna be happy with this stang.
I Agree Ben I think you and Your bro Yuri work together well not saying you should partner on everything but should definitely collaborate more often.
Amazing what you can do with the right skills, the right equipment, and OEM parts! Great job guys!
Does OEM just mean original parts?
@@Charlton2010 Correct. OEM stands for 'Original Equipment Manufacturer'. Typically OEM parts fit the best, but cost the most. In this case, I think they were around $150? Easy decision to buy OEM parts here and the results looked really good.
always amazed by the skills and knowledge you have at such a young age
you have such rich content, the time lapse areas are so well organized .. i appreciate you Vtuned!!
As a person more than twice your age, young folks, think they are invincible. Please wear a filtered mask when you do bodywork as your future respiratory system. will thank you.
Sir ,I had a co - worker die at 61 because of heavy smoking and wielding fumes .Blew his lungs out.
People always comment about wearing PPE, but he listen 1/4 the time. So it is, what it is.
@@6.2Slomaro at least if I say something I’ve done my part
and remove the tint from the windshield.....unless his new wife is the beneficiary on his life insurance.....might as well drive at night with sunglasses on.
@@trusttech9942 it is, what it is. Hopefully he prioritizes PPE soon.
Vtuned gets it fixed the right way ,great job thanks for the video.
Your Mixing Game has stepped up tremendously!!!
What amazes me is to see you guys putting this puzzle back so easily.
Ben and Yuri rock and roll on the rebuild that pony is standing tall driving like a nice mustang should, great team work 👍👍
Very nice job on that rear quarter. Pulling that out and getting it to match the bumper to perfection is not easy!
Ha ha.. mad Max.. hope he and Danny are doing good. Miss them doing work too. Ben you and Yuri/Nate killed it. Car found the right set of hands to fix it. Stay safe and be well. Hod bless
I really like this channel. It stays true to the car stuff. No setting up a saw mill on this channel. Bravo !
Can't believe that it was a totalled.
Great job!
Love the video, my cousin and his three kids are in body repair business. They learned by going to work with my late uncle. Shop asked where did you go to school to learn trade, all hams on.
I have a 2019 GT with PP1 and the bells and whistles besides magnaride. Had a teenager rear end me at a red light but luckily they didn't total the car and it was an easy repair. I'm glad to see you keeping this beauty on the streets still. It's an amazing car. BTW maybe when you get the motor running. Test out your exhaust solenoids if they are sticking. Rev up to 2.2K RPMs. Let off and listen for a slight metal rattle at the front of the motor by the cam phasers. Good to replace that now while you have everything apart.
Sheeesh! Sweet update on the bmw! That thing is looking mint! 🔥🔥🔥 tint made a HUGE DIFFERENCE!
You're such an inspiration to other DIY'ers. I'm about to get my first compressor with paint paint gun and watch your videos all the time to learn as much as I can.
vTuned just gets to work and finishes cars. Good job!
As always Ben, great video and your channel is the best 💙 God bless you!
Those wheels are fire and you a right they could use more rubber. Great video! You are extremely talented.
God bless you and your family!
Yes I think maybe also one size higher profile would look better on those (slightly weird) rims? Maybe paint the grille pony to match the wheel colour might help…
The Samcrac wheels look good on the mustang!
Ben, thank you for sharing the video. I know it’s a PITA to video, do the repair work, and then after a hard days work, sit down to edit the footage. We appreciate the content and your hard work. ❤❤❤
Really digging your videos and your work is clean i cant wait for the next one
that's Rossville Blvd for you... Always some crazy or dumb shyt happening. but while your there Try to hit up Chubby's BBQ! I haven't eaten there in a couple of years but it's some damn good southern cooking! southern style meals and all. small little joint thats been there forever but for the money it's great!
That 'stang has killer exhaust! Love it!❤
I think you had a bit of a score there ben
Wheel alignment and it will be sweet
Nice bit of work on the rear quarter repair
i didn't sleep ,racked with anxiety...
thx for not cutting your Mustang in half
good job
Always enjoy your video . Do you still have white corvette are you planning show video on other wreck corvette
The best part is you don't take them out and beat the Shit out of them, can you imagine driving something 1500 miles in one day just to get the miles needed for break-in so you can beat the snot out of a 100K PU.
respect too vtune autobody gangster its sad that not too many guys in his generation are not doing autobody repair work
Great job Ben. No face mask....you'll end up like me with COPD because I never wore one either. Cheers, Bob
Great series. You hit a home run on GT. are you going to do a cost vs sales estimate video
ben you gotta wear some PPE when doing sanding, grinding and painting. we dont want to see non-stop coughing and one-eyed ben in the future. stay protected bro!
Good to see Ruben, whatever happened to the @DannyTV channel, they haven't posted in over a year
The contrast between the black and gold/copper wheels is great. Black wheels wouldn’t be good at all. Those particular wheels aren’t to my taste but something nicer in a similar colour with additional accents would be cool.
Good job bro! Are you keeping the stang? I think you should keep it until you find a better build
Thank you for your videos - We watch with pleasure and always look forward to new releases !!!!!
Best Regards Chertanovo Chopper’s Custom Club …..
Moscow City 🌆 …..
Russia 🇷🇺 …..
Impressive attention to detail
Did the mustang come with a salvage or rebuildable title??
STANG IS AWSOME...KEEP UP THE GREAT CONTENT 🔥
You make it look so easy 💪🏻💪🏻💪🏻 keep up the good work🤟🏻🍀
Body work skills are amazing 👏
Nice work keep posting your builds
Gotta agree on new struts on the front especially the driver side you can see it’s bowed out on video when you were installing the fender liner
Did you replace the engine mount
Swap the wheels around! The directional wheels being mismatched throws it off! Looks good though.
It's looking good Ben. Can't wait for you to sell it and we get to see your next project.
Recommended to buy PDR tool will help to fix these dents without any paint in future..
Awesome job, I think the tang needs some larger wheels!
Uri is the man !!!~ VTunned should be doing more with his brother for sure . Awesome Team
Great job! Love the car, but I hate the wheels!
@vTuned garage - Thougth you were going to PDR that quarter panel? That was definitely a PDR candidate for repair.
U are a mad scientist foreal! 💪🏾👌🏾
Thought the accident might be the Shelby truck from goons boys.
Thank you vTuned for fixing it right, you will see that will take you a long way, thanks again. 😀✌❤
Hell yeah looks awesome!
Ben the looks of that Mustang you don't need to do much to it I'm not FORD fanatic but I will say that your Mustang look good pretty much as it sits maybe like you say the Wheels Black but all honesty even the Wheels don't really look that bad now and no don't put one of those huge Spoilers on the back it's fine as it is it is a sharp CAR OH and no don't lower it either anywhere I'll give it a BIG THUMBS UP
Great work brother ❤
I'm diggin the copper rims. Do all the emblems in the same color and it would be sweet. Agree on needing bigger tires
Vtune u like a wizard 🧙♀️ man great work love the vids hopefully u get it to some big builds Barry from England 🏴
Bedankt voor de film 🎥 Geweldig 🤩 gedaan top. Groetjes uit Holland 👋🏼🇳🇱
those wheels look great! get more copper bits like badges etc
The repairs on the frame came out good does rims they look really classic don't change them ok 👌 👍
I like those golden wheels. They fit the car perfectly.
Love all the content dawgy
wouldn't those tie rods or other components have major stress or microfractures on some of the metal bits/parts or rubbers?
do the gt500 rear diffuser and the 2019 gt350-R trunk spoiler, and also get the Roush rear aero foil valance and roush front lip and grill
You really need to look into PDR - that dent on the quarter panel would have taken a lot less time and cost
You don't think he knows what pdr is?! Smmh
@George-dy3pt he mentioned maybe getting someone in to do PDR last video. I just think it's something vtuned has the patience and skill to do himself - would make these quick flips so much easier. Painting adds a day or two to any job.
That 5.0 is a demon, dude i love all stangs👊
Is that Goonzquad"s new Shelby being towed?
nice car! i really like that model of stang. great job. looks perfect
I may have missed something. Where is Ben? Excellent content.
10:32 is the editor on vacation :D
What about that broken engine mount on the driver side??? I hope you didn't forget about that or I missed it somewhere?
Ya know those wheels really are bad ass
Great job, you do a wonderful job
Great job! Doing it the right way!
Hope you finally got those guys the lunch you owed em! lol
did i miss something ... did you replace the motor mounts yet ???
Great channel as always.
With all that front end off the car did you replace the broken engine mount?
Ben what is the foam stuff you used on the plastic cowl. ?
@OfficialVTunedgarage__ lets
Taking the time to do it right. Period.
Did y’all replace your motor mount? Wasn’t it busted too?
Great videos. New drinking game. Take a shot every time you hear “as you can see” or “check it out “.
Cool video, it’s amazing how easy you make the repairs look. I guess that’s the price you are paid for
I played it again several times, what lights were on after the alignment?
I'm sure you kno this but you can get flat valve stems to replace that valve stem sticking up in the barrel of the wheel so those rims will fir on the Ferrari!
Do you ever sell these cars? If so where’s the deal completed at? I’m interested…
Hey V-tuned, I believe your two front wheels are reversed, they are not pointing the same direction as the rear wheels
VTuned make one channel for when all your bros collab on a build. Still keep everyone's individual channels as well. Big fan
vTuned deserves millions suscribers. This guy is amazing!
Yes he does
Such a steal man I wish I would of got that! Keep up the content 💪🏾
I want to see your 65 mustang project come back to life 😢
@vtuned garage Are you keeping or selling the BMW... I hope you daily drive it.
Ben we love your work but we want you around for a long time! Please wear PPE man. If not for us, for your wife 😂
Amazing job!!! Amazing skill!!!
What happens when u weld tabs when the opposite side is unreachable? How can you prevent rust from the opposite side, where heat has been applied and most likely rust will form? More power to you VTuned!
Could they drill a small hole through and inject Waxoyl in there?