Sir can you please tell that which cube i should buy between gan 356 xs or gan 356 x .please choose one cube.sir can you please tell me one more thing which is the quietest between x and xs. Please reply sir.
People: AHHH I LOVE THE XS YEEEEEE me: yeah well no MY PERSONAL REVIEW ON THE XS I’m kinda in the same place as J Perm was about the GAN 460. So many people love it, but the best factor for me was the customization and colo(u)r shades. Turning was alright, but corner cutting killed this cube for me. I use roux, so I rely heavily on slice turns, which you’ll need a cube with good corner cutting. The XS has very below average cutting, and even though it was so effortless to corner cut where it did, this did not save slice turns for LSE. The best “screw” setting for me was like 3 or 4 (I forgot), but it still isn’t the best. 1 could barely corner cut a piece, and 6 was too unstable. The spring system was fine. I also didn’t notice the frosted finish :P The magnets were too strong for me. I like to have magnets in my cube, but not to the point where it’s overpowering. Strongest magnets were way to strong for my liking and made turning and slices unsatisfying, middle was the same as strong but less intense, and the weak setting is well fine but still a bit too strong for me. The honeycomb/hexagon piece design is well debatable. Lube is spread evenly, but dust can easily collect there, making cleaning this cube kinda a chore. Weight was the best So overall, my rating? 7.0/10 I’m glad that GAN’s flagship met the community with love and support, and I don’t find anything wrong with that. I do think GAN did do a great job for their flagship, but is it good for me? No. This is all my opinion and is to be taken lightheartedly.
I like thai food I use roux aswell and The M-Slices are absolutely amazing. I have my cube on setting one on the light blue piece, and the third click on the spring compression. My lse suffered a bit on strong magnets, but became really good when I switched to medium (weak magnets made the cube too unstable) What do you average btw?
Albus Dumbledore The RS3M 2020. It performs amazingly well (better than some flagships), and is only 9 USD. People have switched from the Gan XS to the RS3M 2020 because of how good it really is.
the x is more buttery and feels more compact compared to the faster lighter flimsier feel of the xs. i do just as good on both so it’s really just preference
I prefer the customization system of the X because I prefer the feeling of it and I prefer having the physical pieces so I know what I like all the time in case my current one dies and I can just change it quickly to what I like
i have a gts 2m n I would like to buy my first gan. will I get used to the light weight? should I buy the x instead? I would like a stable and kinda fast cube.
The XS looks very fragile like its gonna break after a while if you turn too rough since or drop it from high up, it has a plastic core and tiny tiny plastic instead of a screw in the centers.. im very sceptical about getting an xs over an x
Im gonna mod my Gan X by putting strong ges in front, weak in the back, strong magnets on the left, weak ones on the right and no magnets on the top. Thats MY configuration. Lets see how that works
It was just a joke i didnt try that yet BUT i did try putting only 1 or 3 magnets and rest no magnets and it felt pretty interesting. Like a weaker magnetic version despite fact that some turns probably didnt have any magnet at all and some all 3, most of time it was balanced and had atleast 1
Duneth Ranaweera stickered may look nice, and if you like stickers I would get that. But in my opinion stickerless is better because there are no stickers that can fall off and I think it looks better I'm getting the xs for christmas so I will try to make an unboxing video It it really up to you but would recommend stickerless
Not an expert but, i watched many videos and i would say no. It is still a debate whether or not the X is better and there are many opinions. Personally i think that the XS is superior, but definitely not worth the upgrade from an X. The main difference is the wieght and the customization. If you can't find a good setup for you X maybe. But if you did, and i think you did, than it is only the weight that is more advantageous as many people consider the X as the more "buttery smooth" puzzle. Hope i could help!
love how my main is the yuxin little magic m and i would love to have the xs does the slight frosted plastic even do something for your solves because when they talk they make it seem like a bad thing
It's not necessarily a bad thing. Some people like the grip, some don't. A lot of us are old-fashioned, so some believe that the frosted surface isn't necessary.
Idk if it’s my settings but my xs’scorner cutting is really bad, it takes a lot of effort to cut 45 and sometimes doesn’t cut at all. My settings are 2 for the tension and 4 for the spring compression.
Rowe sounds like he's done with life
I laughed a bit too hard at this
Don’t smoke, kids
David Kim he doesn’t smoke
Cubing Mune he actually does and so does damian and jules i see them in comps smoking im not sure about keenan tho
Rubiks Squared he shouldn’t be smoking at a comp
"Being stuck in this room" :o
I really like how this cube is looking, but the price is a little XS-ive for me
Sula Mareska My first thought when I saw this was: “NO GOD! PLEASE NO!” Probably the best Gan joke ever.
Ha
@@pommens7254 can't tell if you name's "porn" or "pom" on my little ass phone screen.
bruh
its dropped to 50 bucks
You did a great job explaining the new Ges system, thanks guys.
All the excess cash leaving my wallet
Dude u could have said all the xs cash leaving my wallet
Finally, a core we can wash
Where is the GAN XS max
It will come out with the Gan 356 XS pro max plus
Gan 356 XS pro max plus v2: your ultimate PB renewer x2
omg it had three adjustment systems!
Gan 356 11 pro max xsm
Gan 4(inches) SE, only $400 :)
Maybe it’s just me because I’ve seen so much CFOP but Jules solves look so impressive, the M slices and U are 👌
Ik this was commented a while ago, but wtf was that tps at 4:27
GAN HAS DONE IT AGAIN!!!
By that I mean they created another cube I cant afford 😭😂
When the XS releases
Me: fed up and reaching for my wallet
My wallet: No,no I’ll do it myself
My wallet: proceeds to throw itself out the window
yep
Nice review video as always!
"Noooooooooooooo"
-My wallet 2019
it is cheaper than gan x
@@utcyvu6478 I wish your comment had more likes.
@@vandanak.s4946 thanks
@@utcyvu6478 Is it cheaper? If so my wallet is *Demonitized*
Wait did Phil switch to RU u perm 🤔
Xue Kang Chok idk
From 2 years ago. Awesome video 😊
Great video!
Nobody:
Captions: the new game 356 excess
This was released the day I got my Gan X
Swipes Cubes ouch
Yes
It's okay because the Gan X is much quieter.
Sound is not my problem. I felt my friends one and i was sad lol
@@nahbus2033 What do you think of the X? Is it smooth?
Jules Bananalang likes cuddly teddy bears
Don't we all?
Riki Shikato they spook me
PLL Skip If your profile pic is your Pb than my Pb is 5 milliseconds faster lol
i have mine on the loosest tension ( blue hex nut 1st klick) but it still dosent cut 45
Great, the GAN XS is out! Can't wait to get a GAN X on Christmas.
Nobody:
Captions: Game 356 excess
Mine says game 356 xs
Martito 101 sometimes began excess
Martito 101 r/uselessnobody
@@cubingthings2017 no
Tru
Very nice review!
Please feature again top speedcubers in your reviews!
3:27---------------+2!!!!!!!!!!!!!!
Sir can you please tell that which cube i should buy between gan 356 xs or gan 356 x .please choose one cube.sir can you please tell me one more thing which is the quietest between x and xs. Please reply sir.
People: AHHH I LOVE THE XS YEEEEEE
me: yeah well no
MY PERSONAL REVIEW ON THE XS
I’m kinda in the same place as J Perm was about the GAN 460. So many people love it, but the best factor for me was the customization and colo(u)r shades.
Turning was alright, but corner cutting killed this cube for me. I use roux, so I rely heavily on slice turns, which you’ll need a cube with good corner cutting. The XS has very below average cutting, and even though it was so effortless to corner cut where it did, this did not save slice turns for LSE. The best “screw” setting for me was like 3 or 4 (I forgot), but it still isn’t the best. 1 could barely corner cut a piece, and 6 was too unstable.
The spring system was fine. I also didn’t notice the frosted finish :P
The magnets were too strong for me. I like to have magnets in my cube, but not to the point where it’s overpowering. Strongest magnets were way to strong for my liking and made turning and slices unsatisfying, middle was the same as strong but less intense, and the weak setting is well fine but still a bit too strong for me.
The honeycomb/hexagon piece design is well debatable. Lube is spread evenly, but dust can easily collect there, making cleaning this cube kinda a chore.
Weight was the best
So overall, my rating?
7.0/10
I’m glad that GAN’s flagship met the community with love and support, and I don’t find anything wrong with that. I do think GAN did do a great job for their flagship, but is it good for me? No.
This is all my opinion and is to be taken lightheartedly.
I like thai food I use roux aswell and The M-Slices are absolutely amazing. I have my cube on setting one on the light blue piece, and the third click on the spring compression. My lse suffered a bit on strong magnets, but became really good when I switched to medium (weak magnets made the cube too unstable) What do you average btw?
Exotic Butters like 16
I like thai food oh nice. We average about the same
What cube would you recommend for me? My budget is 45 usd max
Albus Dumbledore The RS3M 2020. It performs amazingly well (better than some flagships), and is only 9 USD. People have switched from the Gan XS to the RS3M 2020 because of how good it really is.
Thank you so much for the discount
Wat's better, feeling wise, which of them is mor buttery smooth? . X or XS
X
Depends on how it’s been customized
the x is more buttery and feels more compact compared to the faster lighter flimsier feel of the xs. i do just as good on both so it’s really just preference
Guys let’s be honest. We just watching so we feel better.
I got my GAN 356 XS yesterday and i cant change any magnets or centers because it is sooooooooooooooooooooooo slippery
Wow!
You are solving the Rubik's cube only in 6 seconds!😮
Gan:The brand of the cube
356:it's a 3x3 sized 56mm
XS:XTRA SUFFER!
I mean extra suffer while seeing your wallet empty
What about the giveaway? Plz reply.
does XS stand for extra small? But it is 56mm, so it is bigger than the 354 which is 54mm
Is there any way that you can insert the springs from the XS into the X?
So who won the giveaway?
Are the stickers on the cube used by Hessler bright, full or half-bright?
Gan Is Actually like the Iphone for Cubes
So is this just a better 356x?
i currently use a gan X as my main but i’m not sure if i should upgrade. anyone else?
Just buy a yuexiao edm it is almost the same and way cheaper
yes
@@vekinmekha7345 the gan r was released already
@@hw4nge time Traveller
@@hw4nge lol
How does MoYu feel about this cube?
I prefer the customization system of the X because I prefer the feeling of it and I prefer having the physical pieces so I know what I like all the time in case my current one dies and I can just change it quickly to what I like
this video everytime reminds me of how middle class i am
well i a proud of it atleast i have something to eat
YES ITS FINALLY HERE even though it hasn’t been that long
3:48 KNOW THE SLIDESHOW
GREAT
What is the software he uses to keep track of the time? The one that runs in the laptop.
I'm having the cube in 3 days!!!!
4:28 when u watching prn and your mum comes in and u try to change the tab
i have a gts 2m n I would like to buy my first gan. will I get used to the light weight? should I buy the x instead? I would like a stable and kinda fast cube.
Lisca I was wondering the same thing.
This one is a lot better than the x and it is easy to get use to the weight since the gts Cubes aren’t that heavy
Zen Rin okay thanks I just ordered one I’m so excited to use it.
Hello,when will the angstrom research version and the cubicle version of the GAN356XS appear on the market?
My xs wont corner cut 45' on any tension. Is this happening with anyone else
looking to get a Gan cube for my bf... which one should I get him ? (He’s a major cube nerd and I know nothing lol) thanks !!
Might have to cop but if the frosted finish starts to diminish I will be complaining.
Would you recommend the Gan X or XS?
Next year they are going to name their cube GANS 356 XS Pro
I’m gonna buy a cube at any price even at 145 dollars which one should I get
The XS or the X.
Still waiting for the XS Max
Its like GAN X,GTS3M,AND EDM All Together
When will the XS MAX will come out?
Is it better than the Gan 356 X?
The XS looks very fragile like its gonna break after a while if you turn too rough since or drop it from high up, it has a plastic core and tiny tiny plastic instead of a screw in the centers.. im very sceptical about getting an xs over an x
How many magnets in total are in the XS?
Im gonna mod my Gan X by putting strong ges in front, weak in the back, strong magnets on the left, weak ones on the right and no magnets on the top. Thats MY configuration. Lets see how that works
Any better?
It was just a joke i didnt try that yet BUT i did try putting only 1 or 3 magnets and rest no magnets and it felt pretty interesting. Like a weaker magnetic version despite fact that some turns probably didnt have any magnet at all and some all 3, most of time it was balanced and had atleast 1
@@rotgutthebloated4730 Thx for the info. Im waiting on my black gan X atm I'm hoping it'll be buttery smooth..
What cube would you recommend the x or xs
Yes
Phil do you use zz?
he does
Hey!
Which cube should I buy,
the stickered or sticker less version?
Duneth Ranaweera stickered may look nice, and if you like stickers I would get that. But in my opinion stickerless is better because there are no stickers that can fall off and I think it looks better I'm getting the xs for christmas so I will try to make an unboxing video
It it really up to you but would recommend stickerless
I'm in love
Being completely honest, i have the 356x, do you recommend the update? It sworth it? Is the plastic core really hard and resistant or feel cracks? Ty
Not an expert but, i watched many videos and i would say no. It is still a debate whether or not the X is better and there are many opinions. Personally i think that the XS is superior, but definitely not worth the upgrade from an X. The main difference is the wieght and the customization. If you can't find a good setup for you X maybe. But if you did, and i think you did, than it is only the weight that is more advantageous as many people consider the X as the more "buttery smooth" puzzle. Hope i could help!
No the tactile feel and its flexibily is incredibly annoying to deal with especially after break-in.
Should I get stickers or stickerless
I had a gan x but have recently lost it. I’m now going to buy a new one, so which do you recommend? Gan X or Gan XS ?
*Listen to your wallet*
Buy xs.its little cheaper than the x.And probably more better i think
Who’s going to get this as their Christmas gift?
I will look at a bunch of reviews such as this one and decide if I want the cube and probably get as a Christmas gift if I do like it
@Lawrence Chan dunno man still haven't gotten the xs but the x does feel nice and smooth
Xavier is more stable and feels really nice if I were you I would get it
X or XS?
I sometimes really get confused with the gan settings , but I really want the cube
That tps tho 5:05
love how my main is the yuxin little magic m and i would love to have the xs does the slight frosted plastic even do something for your solves because when they talk they make it seem like a bad thing
Grip feel difference or grip in general
It's not necessarily a bad thing. Some people like the grip, some don't. A lot of us are old-fashioned, so some believe that the frosted surface isn't necessary.
@@thecubicleofficial Thank you for explaining and wow you actually replied
Idk if it’s my settings but my xs’scorner cutting is really bad, it takes a lot of effort to cut 45 and sometimes doesn’t cut at all. My settings are 2 for the tension and 4 for the spring compression.
Try looking at the tension again.Or maybe the corner or edge broke
Wait Phill do u still use the tengun as ur main
When my wallet saw its price - it jumped out from the window 😅
I lost my XS's blue thingy where can I get replacements?
Simple. Buy another one! :)
wowwwww
So... what do the little blue caps do
Wich is better x or xs
Is there going to be a GAN XR
the angstrom version is great
Gan 356 XS = newest i phone 11 pro max
GAN 356XS COMES OUT, LET ME GUESS NEXT IS GAN XR, GAN PRO MAX 😂😂😂😂😂
2:00 epic math moment
About cubees
Can you show me how to dissembled the gan x edge pls
Magical
3:27 plus 2
Does a plastic core ok?
Waffo should really improve his efficiency
What does rowe hessler average
He get 6 seconds but complains
Does the frosted plastic get less slippery after time
Prob not
Is Jules a roux solver?
Ya
Was Jules using roux?
Are you going to make a mystic gan 356 xs
I use the 3rd one
0:39
How do you open that?
jules sounds loke he's being held hostage and forced to make an opinion or he'll be fired 4:13