xiaomi mi 4a gigabit : openwrt factory install using debrick tool and openwrtinvasion
HTML-код
- Опубликовано: 1 окт 2021
- at your own risk!
openwrt.org/inbox/toh/xiaomi/...
run terminal :
im using ubuntu on window10 (wsl2)
you can use other method..vmware/virtualbox/termux
im following Hoddys Guides video :
• Installing OpenWrt on ...
hoddysguides.com/xiaomi-debri...
github.com/acecilia/OpenWRTIn...
00:00 prepare all stuff
01:20 set router to safemode..
power off..push reset button with power on
orange light blinking
01:30 set pc ethernet ipv4 address to 192.168.1.2
connection: Ethernet LAN port
01:50 run TinyPXE..online
install chinese version
ongoing flash : steady orange light...
fail flash: purple light blinking. incorrect TinyPXE router version either chinese/global
successful flash : blue light blinking
offline tinyPXE..reboot router
03:30 set pc ethernet ipv4 address to auto obtain
05:04 install english version (repeat same step from beginning)
09:50 run terminal (A)
11:14 open browser 192.168.31.1 get stok number
git clone github.com/acecilia/OpenWRTIn...
cd OpenWRTInvasion
sudo apt update
sudo apt install python3-pip
pip3 install -r requirements.txt
python3 remote_command_execution_vulnerability.py
ip=192.168.31.1
stok=
login : root
password : root
cd /tmp
CONTINUE
DOWNLOAD THE FIRMWARE
METHOD 1: download using curl
curl downloads.openwrt.org/release... --output openwrt.bin
CONTINUE to INSTALLATION
METHOD 2: download openwrt sysupgrade file using browser
firmware-selector.openwrt.org/
EXAMPLE: MODEL-Xiaomi Mi Router 4A Gigabit Edition VERSION-21.02.3
DOWNLOADED FILE: openwrt-21.02.3-ramips-mt7621-xiaomi_mi-router-4a-gigabit-squashfs-sysupgrade.bin
RENAME file to shorter
EXAMPLE: openwrt.bin
OPEN NEW TERMINAL (B), go to downloaded file folder
cd /Downloads
CHECK ip address of pc
ifconfig
CHECK lan/wlan : inet
EXAMPLE: note the ip address - 192.168.1.225
SETUP HTTP SERVER
python3 -m http.server
EXAMPLE: note the server port 0.0.0.0:8000
BACK TO TERMINAL A
cd /tmp
(use the noted ip address and port)
curl 192.168.1.225:8000/openwrt.bin --output openwrt.bin
INSTALLATION
Verify the firmware checksum before flashing, very important to avoid bricking your device!. compare with the noted sha256sum
./busybox sha256sum firmware.bin
INSTALL OpenWrt
mtd -e OS1 -r write firmware.bin OS1
reboot router
set pc ethernet ipv4 address to auto obtain
open browser 192.168.1.1 - Хобби
Hello, how fix erro ""could not open mtd device: os1""?
I have the 4a 100m Chinese. How can I install open wrt on it?
Can I make a debrick if I have a Breed installed?
Orbit pro dong bang dijadiin openwrt + OC / Passwal
Please build fw passwall + nft qos.
I have tried to compile but it always error.
boleh cuba
drive.google.com/file/d/1_OCLitzpDnRutSRhwd32i-x_V1ysCucl/view?usp=sharing
Unbrick mi router3?
Bleh share file English version tak?
boleh boss...saya up debrick di t.me/joinchat/3j15vqnEPihmNWQ1
Hai tuan kalau da brick..boleh repair ke software?
ikut hoodys guide..flash miwifi firmware..jd mcm asal..
Make video mi 4A gigabit router openwrt high range …all block side remove…open any server or website please?
passwall included..use vpn such vmess, vless and trojan
@@puteraseroja which vpn? And how to download ?
@@Luck00063 ruclips.net/video/haHPW0kYs0g/видео.html
Kita download kok isinya tidak sperti di vidio
Bang gimana udah bisa kah
Engglisnya dapat dimna