DIY ute tray install | Tub removal | Ford Ranger Dual cab
HTML-код
- Опубликовано: 7 сен 2024
- G'day guys, thanks for watching!
In the vid Jordan gives me a hand removing the tub off the ranger and installing a tray. Looks amazing! Let me know in the comments what you think.....
Remember to like and subscribe to the channel if you have not already, costs you nothing and really helps the channel. Massive thanks again, see ya in the next one! / @4weeksleave
Workmate Trailers : workmatetraile...
#4wd #4x4 #Ford #Ranger #Adventure #DIY #Ute #Bakkie #Overlanding #Camping #4weeksleave
Hi mate. I'm looking into getting this tray. Now that you have had it for a while. I was wondering how it's holding up and have you had any problems with it. Cheers
Hi Mate, 100% I have no complaints with my tray. Thinking of getting my father inlays ute one as well now.
Hi from South African vloggers 🇿🇦 😀 ❤️ 🌍
Howzit mate!
Hi Willie.
I am looking at doing up my old 1st generation Mazda BT50 dual cab ute, 2007 series. I am considering replacing the tub with a flat tray and a gull wing double door canopy. A 1200 mm length canopy should suit our requirements. I was impressed by your video and the Workmate tray. It has been nearly a year now since you uploaded this video. How has the tray performed? Any issues regarding cracked welds, the quality of the lights provided fixing bolts etc? How deep is the under tray drawer provided with the tray? The web sight gives the length and width but not the depth of the drawer. How is the TC Canopy going? Thanks guido
Hey mate, thanks for the kind words. The tray is going really well, no issues with it whatsoever. No cracks or issues withs lights.
Tray is about 130mm deep(internally)
TC canopy is great as well
Thanks for that. I,ll definitely aty have a look at that tray.
Hi great video , just wondering if you had the diagram for the tail light wiring as I’m going through the process now thank you 👌
Hi mate, thanks for that. No sorry I don't, it was just a bit of trial and error until I got the right ones.
22 years old for sure
Very close
Thank you for the web site link, but your tray did not appear. What is the cost?
Was about $3500 when I got it
Hey mate looking to swap my tub for a tray and was wondering does the wiring take much to do or is it pretty simple cheers 👍
Wiring was supper simple to do
Hey mate did those tray brackets come in the pack or did you buy seperate
Hey mate, they came in the pack
What size are those main bolts you took out of the tub
Hey mate, I cant remember off the top of my head, going to say M16
Almost guarantee those tail lights will leak.. I've had 2 sets.. Second set were free.... All.l leaked.. Narva next I think
Yes, I've no issues with them as of yet, but dont rate them, we'll see how they go
hey mate nice work did you have to get a road worthy certificate or anything??
Hey mate, yes I got it inspected and changed on the rego from "wellbody" to "flattop"
Hello mate, nice tray. I have an XLS also and looking to DIY a tray. Just wondering if/how you relocated the reverse camera/sensors? Cheers.
Thanks mate! I took the factory camera out of the Ford emblem, 3D printed a little holder for the camera and fitted that to a bracket positioning the camera to see out the back and the tow ball. I have not yet relocated the sensors..... I am still trying to come up with a good idea to mount them. I dont just want to stick them in to an angle on the bottom or the tray (Dont think it looks great and worried it will get caught up driving out of some steep stuff) Thinking to mount the in the square tubing of the tray below the lights and drawer. Hope that helps....
@@4weeksleave yeah it does cheers!
Any idea how heavy the tub weighed?
Id say under 100kg, 2 of us got it off...?
Lol, n' boer maak a plan heh?😂😂
Hey mate I’m from the same area, getting a GT fabrication, where did you sell your tub ?
I just put it up on marketplace, for $500, it was gone in 2 days.
did the tray come in flat packed
Yes mate it did
Hey mate looking at the same tray did it come assembled or did it come as a flat pack cheers.
Hey mate, there is not much to it. The 2 frames to bolt to your chassis, the tray itself and the drop sides. So flat packed if you like but the drop side just slide on and you need the frame separate to fit to the chassis. Hope that helps!
how much your tray ?
$3500 when I got it
Hoekom wil mens so n ding op jou bakkie sit?
You will have to see in the next video, but it is way more practical and versatile, everything is not just for the looks;)
How old do you think I am....? Trick question
Hahahaha
Hey legend,
I’ve just done my tray in Perth on my own..
What did you do with the fuel flap central locking loom and the roll bar light loom?
Since removing the tub my battery keeps going flat 😂
Great done DIYing it yourself as well mate. That's very strange..... I just left mine unplugged, didnt do anything specific to it.
I was concerned about all the wire looms 'exposed' a bit more that the tub was hiding before, but I have had no issues with it yet 12 months on.
Did you do any other work on the car...? Tail lights and indicators ok???
@@4weeksleave cheers mate! It was good fun, got the tray from MW in O’Connor. Decent tray in my opinion, was able to install the sensors on strut end caps which was handy, and they threw in a reverse camera housing for me.
I used the basic lights they gave me, which are working fine for now :)