Balancing front to back in addition to side to side is like taking the shackles off the reed. I've liked my reeds since finding a good brand for me and learning to balance side to side, now I LOVE them! Thanks, Tom. This is really a paradigm changing approach. The reed is now a musical vehicle rather than a challenge standing in the way of progress.
Thanks, so much. My goal is to try to make learning to play the clarinet easier for you than it was for me, and that includes not just education, but helping people to not get ripped off by unscrupulous people who sell overpriced, over-hyped, under performing products by making false claims that cannot possibly provide what is promised. Video about this coming up soon.
Thanks so much for all the time and information you’ve put into these videos, Tom. Reeds have been the most frustrating part of playing since the very beginning. Now my reed finishing is getting better with each attempt, and most importantly, playing the clarinet is becoming easier and much more fun.
Thank you very much Maestro, your teaching is very understandable and simple, while waiting for your equipment I have already done some experiments and I managed to improve my reeds a lot, it had never happened with these results!
Wonderful Class on finishing reeds Mr. Tom. Thank you for sharing your experience, I think the basics you explained on finishing can somehow be similar to the Oboe reeds. Great video!!
I know this is an older video, but it would be nice if you could make a new one with more explanation of the front to back balance, what to do with the middle third, and what you’re looking for when testing.
Tom, thank you so much for your efforts to make our life easier!!! I have a question about the back side of the reed, I couldn't find the answer in the ATG. How should I know how much "wood" should I take from the back side (left/right) to keep the reed in a balance, what is the test method about? Because if they are unbalanced behind the energy flowing back and reflected from the back will not be inline if the back is not also balanced, or am I wrong? I would really appreciate very much a short (or even a long) explanation. I ruined quite few reeds ending up with a too thin tip, because they were "heavy" Regards, D.
Unless Tom has changed his approach, I"m pretty sure that he never touches the back side of the reed. (I never have and never will because of the danger of thinning the tip, and I see no reason to do so anyway unless you want to try to flatten a warped reed, which is IMO a waste of time.) If I recall correctly, in one of his videos he specifically warns against the practice.
@@bmcgar I apologize - I didn't mean the real back side of the reed but the down side - opposite of the tip (tip=front, back=down side, sorry english is not my mother tongue). According to Tom if the sound is stuffy/heavy, especially but not only in the lower register, taking a material/wood away from the down part, just before the bark (which I called back side) , it should solve the problem. Tom says - too many reed have to much material / are too thick there.
@@danil6006 I understand. Been using that technique, though with a reed knife, for a long time. I only use it when all other adjustments don't work, though.
Hi, This is a great video! I'm trying to purchase one of these sanding blocks but I don't know where to find them. What keyword would you recommend to search?
I really appreciate these videos, they are a real service. Two questions: Do you flatten the bottoms of the reeds first to make sure they sit flat on the mouthpiece table, and do you recommend using a stiffer reed than usual and working it down to your normal resistance? I ask these questions having read David Pino's book "The Clarinet and Clarinet Playing" and these are part of his reed adjustment methods. He, as you probably know, recommends we all move on to making our own reeds from blanks! Something I'm not ready for yet.
No. The reed should speak easily with a clear tone. Well-balanced is what I look for, so I don't have to close to force the reed to respond. I never flatten a reed. Correct the issues of reed imbalance and any perceived flatness issues seem to vanish in most every case.
This is just my observation, but I find that the very tip is usually pretty even, but it's the area just behind the tip and along the sides that is imbalanced. If I finish the tip first, then work on one ear or side, then the tip ends up with one side very thin (since every pass of the sandpaper goes over the tip with the ATG system), and I am more likely to get "chips" and "whistle" squeaks. For this reason, I usually leave tip finishing for the very end. How do you avoid over-thinning one side of the tip if you do balancing later in the process?
Great video. Thank you. I play cane for sound, recording & Legere reeds for practice (when I’m ready to give up on the cane for the day. Do you have any experience with refinishing synthetic reeds? Does it work?
Balancing front to back in addition to side to side is like taking the shackles off the reed. I've liked my reeds since finding a good brand for me and learning to balance side to side, now I LOVE them! Thanks, Tom. This is really a paradigm changing approach. The reed is now a musical vehicle rather than a challenge standing in the way of progress.
You're more than welcome!
Thank you so much!! You are truly a fantastic teacher. 😊😊
Thanks, so much. My goal is to try to make learning to play the clarinet easier for you than it was for me, and that includes not just education, but helping people to not get ripped off by unscrupulous people who sell overpriced, over-hyped, under performing products by making false claims that cannot possibly provide what is promised.
Video about this coming up soon.
Best video ever for a clarinetist
Thanks so much for all the time and information you’ve put into these videos, Tom. Reeds have been the most frustrating part of playing since the very beginning. Now my reed finishing is getting better with each attempt, and most importantly, playing the clarinet is becoming easier and much more fun.
Thank you very much Maestro, your teaching is very understandable and simple, while waiting for your equipment I have already done some experiments and I managed to improve my reeds a lot, it had never happened with these results!
Thanks for such a great video. Will this work also for saxophone reeds?
Your clar. playing is very nice! ❤🎉
Wonderful Class on finishing reeds Mr. Tom. Thank you for sharing your experience, I think the basics you explained on finishing can somehow be similar to the Oboe reeds. Great video!!
Glad it was helpful!
Thank you so much! Now I can play my reeds!!!
I only took 3 lessons from Harold Wright, but he did tell me that he didn’t like the V12’s. He said he’d always used the Traditional model.
I know this is an older video, but it would be nice if you could make a new one with more explanation of the front to back balance, what to do with the middle third, and what you’re looking for when testing.
BRILLIANT! Thanks 🎉🎉🎉❤
Thanks for all your efforts
Tom, thank you so much for your efforts to make our life easier!!!
I have a question about the back side of the reed, I couldn't find the answer in the ATG.
How should I know how much "wood" should I take from the back side (left/right) to keep the reed in a balance, what is the test method about? Because if they are unbalanced behind the energy flowing back and reflected from the back will not be inline if the back is not also balanced, or am I wrong?
I would really appreciate very much a short (or even a long) explanation. I ruined quite few reeds ending up with a too thin tip, because they were "heavy"
Regards,
D.
Unless Tom has changed his approach, I"m pretty sure that he never touches the back side of the reed. (I never have and never will because of the danger of thinning the tip, and I see no reason to do so anyway unless you want to try to flatten a warped reed, which is IMO a waste of time.) If I recall correctly, in one of his videos he specifically warns against the practice.
@@bmcgar I apologize - I didn't mean the real back side of the reed but the down side - opposite of the tip (tip=front, back=down side, sorry english is not my mother tongue). According to Tom if the sound is stuffy/heavy, especially but not only in the lower register, taking a material/wood away from the down part, just before the bark (which I called back side) , it should solve the problem. Tom says - too many reed have to much material / are too thick there.
@@danil6006 I understand. Been using that technique, though with a reed knife, for a long time. I only use it when all other adjustments don't work, though.
Hi, This is a great video! I'm trying to purchase one of these sanding blocks but I don't know where to find them. What keyword would you recommend to search?
I really appreciate these videos, they are a real service. Two questions: Do you flatten the bottoms of the reeds first to make sure they sit flat on the mouthpiece table, and do you recommend using a stiffer reed than usual and working it down to your normal resistance? I ask these questions having read David Pino's book "The Clarinet and Clarinet Playing" and these are part of his reed adjustment methods. He, as you probably know, recommends we all move on to making our own reeds from blanks! Something I'm not ready for yet.
No. The reed should speak easily with a clear tone. Well-balanced is what I look for, so I don't have to close to force the reed to respond. I never flatten a reed. Correct the issues of reed imbalance and any perceived flatness issues seem to vanish in most every case.
@@billyboy647 Thanks!
Glad to see you are doing well
Why just start with a slightly thinner reed? (Like a #3 instead of a #4)
Would you recommend lower reed number than the mouthpiece, or higher?
This is just my observation, but I find that the very tip is usually pretty even, but it's the area just behind the tip and along the sides that is imbalanced. If I finish the tip first, then work on one ear or side, then the tip ends up with one side very thin (since every pass of the sandpaper goes over the tip with the ATG system), and I am more likely to get "chips" and "whistle" squeaks. For this reason, I usually leave tip finishing for the very end. How do you avoid over-thinning one side of the tip if you do balancing later in the process?
His first thinning of the sides of the back didn't go over the tip in this video. Don't know about the DVD.
@@MrDavidFitzgeraldI’m thinking more the sides of the reed and tip (like at 9:50).
Is there any concern about sanding on the glass itself? Creation of glass dust on a reed?
None.
What strength of reed did you start with?
Great video. Thank you. I play cane for sound, recording & Legere reeds for practice (when I’m ready to give up on the cane for the day. Do you have any experience with refinishing synthetic reeds? Does it work?