Would the issue with the bottom hole be resolved if the initial sketch were on the base XZ plane? I’m thinking it was probably caused because the sketch was attached to the upper face.
2:15 in my freecad when I select the point and select the circle I can't apply a coincident constraint. Also the coincident constraint you use has a different icon from mine, could that be the issue? The coincident constraint only worked when I selected the point on the line and center of the circle. That affected trimming because it trims the whole circle. Please help me 🙏
You do an amazing job. I find following your instruction very helpful.
Thanks for keeping these free cat tutorials coming.
Good instructions.
You are performing a great Job !
Thank you very much for your videos you are sharing. All your tutorials are so useful for beginners like me 😊.
Vielen Dank für die sehr ausführlichen Beispiele. Sie sind ein sehr guter Lehrer! Grüße aus Deutschland.
Would the issue with the bottom hole be resolved if the initial sketch were on the base XZ plane? I’m thinking it was probably caused because the sketch was attached to the upper face.
2:15 in my freecad when I select the point and select the circle I can't apply a coincident constraint. Also the coincident constraint you use has a different icon from mine, could that be the issue?
The coincident constraint only worked when I selected the point on the line and center of the circle. That affected trimming because it trims the whole circle.
Please help me 🙏
Nvm I found the solution.
I was using an older version of freecad. I installed version 1.0.0 and it worked
3:15. "Intersting" bug: if you instead of the half "pear" do it whole and try to rotate arount the center, freecad will crash.
first