it doesn't mather which one they instaled when windshield would bend same on both (didnt look they expected that from video reaction), as it would still be week point, no triangles there to support it.
@@miataisalwaystheanswer1356 go with hard dog if you want to go cheap blackbird fabworx for expensive. Both are good but the bbfw is higher quality. I got a hard dog deuce and it's pretty good it's just safer for street use because it's further back than most other ones.
I mean the bar worked fine the first time they dropped the car on it and only slightly bent after being dropped a second time when it was already weakened. Nevermind that it held up better than the windshield of the car which is what those rollbars are designed to do. It's not even a proper test because in a car that is actually all together a bar like that would have more support. Nevermind that having a rollbar is better than no rollbar at all.
@@Jaqen-HGhar did we watch the same video? The style bar provided no support just like the dummy’s neck and windshield. I’d say the bar they dropped the car on didn’t do anything. Even worse it could not hold the weight of the stripped chassis from a minor six foot drop with no other G forces acting on it. Huge difference between the back roll bar in the nice Miata versus this piece made from fused together coca cans.
@@iPlungerApparently not because the video I watched showed a first drop happening on the bar in the exact angle and direction that the bar "failed" the second time. At 14:13 the car falls sideways at an angle after already being lifted and guess what? It didn't didn't even flex (only bending slightly but enough to set it up for failure the second time) and despite all the weight going on one side of the bar. The only reason the dummy hit it's head was due to it landing on the tire. So then the second time at 16:43 the bar "fails" due to already being slightly bent from the first drop and it only gives somewhat in the direction it was already bends somewhat and returns to support the weight of the car despite the windshield caving in. Had the bar actually failed it would have bent as much as the windshield. The bar is still above the seat even after all that which my original point was that it's better than nothing at all and you can see they are trying to make it look much worse than it is by bending on it it as hard as possible after turning the car over right away but even the dude says that all the bolts are still in place (despite Zach trying to make that not the case). The second test is pointless because no one would reuse bars after a rollover and especially after they were already visibly bent before even starting so there is no reason to re run the test other than they didn't want to waste the video. Maybe if they had titled the video, "Do cheap rollover bars still protect you after an accident?" That would have been more honest but no. Also you used the term style bars which are a totally separate thing and literally say when you purchase them or if part of an OEM package that they are not rollover bars and will NOT protect you in the event of a rollover. So if they are trying to pass off style bars as actual rollover bars as a legitimate test that's even worse.
@@Jaqen-HGhar At 14:26, the windshield frame landed on top of the tires which prevented the roll bar from touching the ground. These types of cheap roll bars have limited points of contact to frame and thus less structural rigidity are very unsafe. There's no regulation for aftermarket functional and non-functional so if you are an amateur looking to modify your car, a cheap "style" bar and actual roll bar are both marketed as roll bars and it's very easy to pick the cheaper option thinking it will be effective.
Eyes too blue he scares me. Like those color enhanced WW2 movies in the 60s.. he's gonna do something just evil any second now. Like... Drop a Miata on it's head
Welder/fabricator here - DOM tubing is awesome. However your description is inaccurate: the thing that gives it consistent strength in every direction is the fact that it is drawn over a mandrel and NOT welded. If you look inside a DOM tube, there is no seam. A weld seam like you get in normal, cheap hot rolled ERW (electric resistance welded) tube causes a difference in hardness and therefore strength along that weld in the tube. The DOM process eliminates the need for a weld seam and so gives the tubing awesome, consistent strength properties - perfect for a roll cage. Anyways, love the show. Keep up the awesome content! Super excited to see this Miata come together!
7th Knight of Ni. How would me being a millennial have anything to do with being to “young” or “sophisticated” to understand willy wonka I was just saying how I read it you should re-evaluate your life if you’re trying to bully a 18 year old on RUclips comments about a roll bar
@@ueehurstonsecurity8887 In some rollovers, the style bar/"roll bar" will actually just fold forward and crush the driver, like the way a mouse trap snaps over a mouse's head. Google "miata style bar roll over" and you'll see a few examples. There's a white NA where not only the style bar folded forwards, even the tops of the seats are folded over as well.
I once had an acquaintance who had one installed with only the two bolts on the side screwed in and the bar could be pivoted by hand. I pointed that out to him and he fixed it pretty quickly.
@@zacharytracy3797 I just bought a Miata, it has a style bar. It's held in by four bolts, I'm ordering a proper roll bar right after I deal with some other issues it has
I love the editing sound effects in these videos. I lol-ed when Zach hit the roll bar and the editor put in a smack noise. I love when he throws stuff and a crash noise and cat scream follows!
These videos are like the opposite of clickbait. I come wanting to see the difference between cheap and expensive roll bars (which would have been totally fine) and get a 2-for-1 car and fork lift drop. I love you guys
3 things I would suggest to anyone installing a legit rollbar that weren't covered: 1. ALWAYS make sure ALL mounting plates line up perfectly before drilling and bolting. 2. Also before drilling, make sure your soft top or hardtop will clear the bar and especially the soft top during the closing process. 3. You can get some vinyl trimming to make your interior plastic cuts look stock if needed (I hacked mine up with snips and the trimming worked like a charm). Other than that, this is a great look at what's involved in putting one on. And great to see the style bar tested, I swear everyone in the forums say to stay away from these 😂
@@steven9492 It means drawn on a mandrel. They take solid bar of steel and draw it throu a mandrel that makes a hole inside. It makes a pipe or tube seamless, and much stronger
TLDR: Haha look at this stupid rollbar, who buys this...(feeling smug about quality rollbar in the home shop) **A-Pillar folds in worse than rollbar** 17:02 ...Whelp Next time on Money Pit, installing a roll cage in a Miata
@@SHS2018 in my home state, Massachusetts, windshields are always covered by insurance. Out west, they're not. It's fairly common to see windshields damaged by hailstones out west, that may be a major reason. But anyways, I think the Mass laws, (for once), sensibly saves lives. Windshields aren't just for keeping bugs out of your teeth!
The Rusty Wallace blow up cars in the background are legit. Imo one or the best racers to ever live. My neighbor was family with him so I got lots of autographs.
Dude... oil based paint markers... they even have multiple colors. Easier to wield in tight spaces. Also great for marking bolts. Clean and tidy, fit right in the toolbox.👍
I’m just imagine how they’ve asked the neighbor: “Hey dude, could we borrow your forklift for a moment? We’ve just tipped ours over...” “Yeah of course, take it, habe fun... don’t kill yourselves!”
I finally subbed to the channel (even after watching for years) because of this show. Leave it up to Money Pit to keep me guessing on what each weeks episode is going to be! And that's a good thing hah
You know, The funny thing is, I don't know Jack about cars. But I watch Donut. Simply because I get a kick out of watching Donut. Keep up the good work, guys.
I heard a story a few years ago about a guy in a Convertible Porsche. He was driving around in the Hills of California and got distracted, went off the road and rolled his car. After a few minutes he crawled out just fine and was on the phone with 911 when he heard someone behind him. A truck driver saw the accident and stopped, watched the guy get out of the destroyed car and crawl his way up the ditch. "Hey buddy, you alright?" The Porsche driver turned around to acknowledge the Trucker and let him know he was okay, before immediately falling to the ground dead. Apparently he had broken his neck and when he turned his head it severed his spinal chord and killed him instantly. ✅ Roll Cages are Good 😸
Osha is pissed right now i bet. They probably got an aneurysm watching you walk on top of a forklift which was on its side not long ago (16:00) lmao. So many violations, but hey, its not a work site so its legal 😂😂
Damn, for some reason I thought they came stock with roll bars, thats kinda crazy how convertibles can be street legal with 0 head protection in a flip, yet pop up headlights arent allowed for pedestrian safety.
@@mtbsaga3063 Of course I didn't mean convertibles were illegal, I drive one myself! 😅 I meant the "0 head protection in a flip" - part, a.k.a rollbars, they're mandatory now and have been for quite a while.
The surprise in your face when you realized the windshield isn’t even remotely interested in supporting the whole car is hilarious. Yup a hardtop ain’t gonna save you either roll bar for sureeeee
Also I wanted to add, when you were talking about the shapes of the roll bars. The triangular shape in the engineering field is called a "truss" it bring the force from a "face" of a shape to the connections of a truss. If you go into a large department store and you look up at the ceiling, you will see metal bent into a lot of triangles too!
They don't mention this but I see Zach made the right choice in fasteners, which is super important no matter what you're mounting. Grade 8 chromates bolts and nuts.
The welder in me cringes hardcore every time Zach uses an angle grinder without a guard and without gloves, espescially with that 1mm cutting disk. Like yikes man. Literally one kickback, one misplacement, one shitty or bum disk and you're out at least a finger. Big ol nope.
I like this channel because it's a modern fun car fans channel. It reminds me of a modernized but still honest version of those car build shows that used to be on tv all the time back during satellite days
DOM tubing does not have a welded seam.. it is seamless. Makes great roll bar tubing because it can be sleeved with a very tight fit, and you dont have to remove the seam or get undersized tubing for the sleeve material.
My neighbor told me that when him and his buddies got into racing, they needed a roll bar, that had a vertical tube as well for stability, they didn't have time to actually get a welder and weld a vertical tube, so they fake welded a vertical tube onto it with hot glue, then sprayed painted over it, the car is stripped of all equipment and tech, but the chassi with the roll bar is still on it in his yard. I'm 99% sure that that roll bar would do better
We used to like to think at the BlackOut Garage we had mad forklift skills. Guess we'll have to work on that. Glad the second try was a success!
guess the forklift needs a good roll bar
Casey Juco 😂😂🤣🤣🤣love it
Ee
I have some amazing biking skills
You’d have to lose against my unfortunately... 😂
“Do your roll bar before your seats. It can create fitment issues.”
Someone remembers hi/low 😂😂😂
Ayy
L u L
arendjd I remember that!
hahahahaha xD
😂😂😂
Please drop the money pit miata on it's roof for comparison
would really help me decide, i'm not convinced the nice one would hold up either.
No dude 😂 install it rather in a junk miata and test then
If you want an idea of what a real rool bar can handle a roll over, check out this : ruclips.net/video/wdSkihF42sI/видео.html
@@BuzzinBeatz it was a joke.
The A pillars on these Miata make it a Deathtrap either way lol. The roll bar at least keeps the nuggins from hitting the ground directly.
it doesn't mather which one they instaled when windshield would bend same on both (didnt look they expected that from video reaction), as it would still be week point, no triangles there to support it.
14:15 “Guido, Look! A real Ferrari!”
Gilbert G. Best comment in the comment section
This comment is so underrated!
best comment
how is this not the top comment. I'm dying!
Took me a second to get that one. It’s been far too long since I last saw that movie!
The cheap one is called a mouse trap by us Miata dudes, if you get rear ended it’ll fold onto you and will do much more harm than protect you
Awh man for real?!? My roll bar is similar but a lot better quality and I had to cut bits of interior to install it and I don’t know what to do now
@@miataisalwaystheanswer1356 get a new roll bar.
@@miataisalwaystheanswer1356 go with hard dog if you want to go cheap blackbird fabworx for expensive. Both are good but the bbfw is higher quality. I got a hard dog deuce and it's pretty good it's just safer for street use because it's further back than most other ones.
@@miataisalwaystheanswer1356hope you got something new buddy…
The best thing about bad roll bars is that anyone who didn't like the product inst around to complain about it.
This is dark man 💀
Human test dummies.
"inst"
i love how truthful this is
They call this roll bar a mouse trap
the cheap one is just more environmentally friendly ... just bend it back after a crash - As good as new!
If you still have a head...
Yes bend your head whilst you’re at it
M Riedsch but you’re dead as a pancake
even if its bent all the way back its still "as good as new"
M Riedsch you can also bend ur bones back to, ENVIRONMENTAL
A good roll bar is the reason a friend of mine is still alive
really?
My grandpa too!
I was instructing at Willow Springs with a guy in a Supra and he rolled it 4 times. The rollbar saved our asses.
@@kimchi2780 wow , glad ya'll safe !
I like how casual they are about the lift falling over
It was so obvious that was going to happen. How the hell do these guys get so many views? People want to watch dumb people doing dangerous stuff?
@@diabolus5522 and yet, your subscribed to them. Funny how that works
@@lucasb5908 awww snap!
It did seem obvious given the perpendicular load.
Since Donut hired Zach Wednesday’s have been my favorite day of the week.
Funsta 23 agreed. Money Pit (and Donut Media as a whole) is one of the better things to happen on RUclips. :)
Agreeedddd
Sunday ( podcast ) is really good
Worddddd
@@MicahS70T5M The angle-faced guy is annoying though
"You gotta find your max sketchy, then dial it back"
Such wisdom
That part made me laugh
Read this comment as he was saying it and now im dying of laughter
it's like Seinfeld's joke about maximum strength medicine. "Find out what dose will kill me, and then dial it back a little bit."
Guy in a straw hat and overalls to the rescue. You can't make this stuff up. Great episode.
Big difference between a “style bar” and a bolted into the chassis NASA approved roll bar
Exactly. Those are even labeled as style bars when buying them.
I mean the bar worked fine the first time they dropped the car on it and only slightly bent after being dropped a second time when it was already weakened. Nevermind that it held up better than the windshield of the car which is what those rollbars are designed to do. It's not even a proper test because in a car that is actually all together a bar like that would have more support. Nevermind that having a rollbar is better than no rollbar at all.
@@Jaqen-HGhar did we watch the same video? The style bar provided no support just like the dummy’s neck and windshield. I’d say the bar they dropped the car on didn’t do anything. Even worse it could not hold the weight of the stripped chassis from a minor six foot drop with no other G forces acting on it. Huge difference between the back roll bar in the nice Miata versus this piece made from fused together coca cans.
@@iPlungerApparently not because the video I watched showed a first drop happening on the bar in the exact angle and direction that the bar "failed" the second time. At 14:13 the car falls sideways at an angle after already being lifted and guess what? It didn't didn't even flex (only bending slightly but enough to set it up for failure the second time) and despite all the weight going on one side of the bar. The only reason the dummy hit it's head was due to it landing on the tire. So then the second time at 16:43 the bar "fails" due to already being slightly bent from the first drop and it only gives somewhat in the direction it was already bends somewhat and returns to support the weight of the car despite the windshield caving in. Had the bar actually failed it would have bent as much as the windshield. The bar is still above the seat even after all that which my original point was that it's better than nothing at all and you can see they are trying to make it look much worse than it is by bending on it it as hard as possible after turning the car over right away but even the dude says that all the bolts are still in place (despite Zach trying to make that not the case).
The second test is pointless because no one would reuse bars after a rollover and especially after they were already visibly bent before even starting so there is no reason to re run the test other than they didn't want to waste the video. Maybe if they had titled the video, "Do cheap rollover bars still protect you after an accident?" That would have been more honest but no.
Also you used the term style bars which are a totally separate thing and literally say when you purchase them or if part of an OEM package that they are not rollover bars and will NOT protect you in the event of a rollover. So if they are trying to pass off style bars as actual rollover bars as a legitimate test that's even worse.
@@Jaqen-HGhar At 14:26, the windshield frame landed on top of the tires which prevented the roll bar from touching the ground.
These types of cheap roll bars have limited points of contact to frame and thus less structural rigidity are very unsafe. There's no regulation for aftermarket functional and non-functional so if you are an amateur looking to modify your car, a cheap "style" bar and actual roll bar are both marketed as roll bars and it's very easy to pick the cheaper option thinking it will be effective.
zach sounds like a mom “if only someone would help me” “no, I can do it, leave me alone”
Car Guy I legit thought my mom was the only one that acted that way 😂.
Channeling his inner Kimi raikonnen
LuisLYGA HAHA INDEED. He knows what he’s doing.
The moment you are looking for: 16:34
The real moment you are looking for: 14:14
The moment you didn't know you were looking for
Like that scene from cars
Thanks
@@tips4truckers252 gratitude is such a beautiful thing!
Truth. (:
I love all things Donut, but Money Pit has become my favorite show. Keep up the awesome stuff.
I got a mazda ad after the video that said “where your safety is our number one priority” LMAO
Me: *Watches video*
Me: *Goes out to check if my $100 roll bar will kill me*
Me: *Looks at my wallet*
Me: "it's alright"
😂😂
In hindsight the car they used is way lighter than yours
this is great ahahha
wtf is this me me me me nonsense, learn to write
@@r390gt1lm no you
1:38 You’re lucky that rod didn’t go right up there...
lol I've seen that vid XD
"The last dab" a first we feast quote
Zach is my favorite donut employee, the way he talks about mechanics and car stuff really shows that we can really listen and learn from him.
👍
yea learn from his mistakes, like pulling the forklift sideways from a very high up point
We should call him Zachfix
Eyes too blue he scares me. Like those color enhanced WW2 movies in the 60s.. he's gonna do something just evil any second now. Like... Drop a Miata on it's head
When Zach said "The Last Dab", I immediately thought of chicken wings. 😅
So did everyone else.
That's what I was thinking of too
Donut Media ya me 2
lmao I thought of weed
I thought of ur last dab/rip
Welder/fabricator here - DOM tubing is awesome. However your description is inaccurate: the thing that gives it consistent strength in every direction is the fact that it is drawn over a mandrel and NOT welded.
If you look inside a DOM tube, there is no seam. A weld seam like you get in normal, cheap hot rolled ERW (electric resistance welded) tube causes a difference in hardness and therefore strength along that weld in the tube. The DOM process eliminates the need for a weld seam and so gives the tubing awesome, consistent strength properties - perfect for a roll cage.
Anyways, love the show. Keep up the awesome content! Super excited to see this Miata come together!
I love how they use Nolan face for references 😂
“Come with me and you’ll beeeee in a woooooorld of osha violations.”
😂🤣😂🤣😂🤣😂🤣😂🤣
Came to the comments looking for this 😂😂🤣
Why’d I read this like Hail Mary by Tupac not the Willy wonka song
@@danielrozenkowski5399 because you're a millenial tool and not old enough or sophisticated enough to understand Willy Wonka.
7th Knight of Ni. How would me being a millennial have anything to do with being to “young” or “sophisticated” to understand willy wonka I was just saying how I read it you should re-evaluate your life if you’re trying to bully a 18 year old on RUclips comments about a roll bar
"Take a look, and youll see large ciiiiiitaaaaaaaaaaations.... "
The $65 "roll bar" isn't even a roll bar. It's a style bar, aka mousetrap.
what does that mean to call it a mouse trap?
@@ueehurstonsecurity8887 In some rollovers, the style bar/"roll bar" will actually just fold forward and crush the driver, like the way a mouse trap snaps over a mouse's head.
Google "miata style bar roll over" and you'll see a few examples. There's a white NA where not only the style bar folded forwards, even the tops of the seats are folded over as well.
I once had an acquaintance who had one installed with only the two bolts on the side screwed in and the bar could be pivoted by hand. I pointed that out to him and he fixed it pretty quickly.
@@zacharytracy3797 I just bought a Miata, it has a style bar. It's held in by four bolts, I'm ordering a proper roll bar right after I deal with some other issues it has
does installing a rollbar prevent you from pulling up the roof? Or does it depend on what design are you getting?
Zach: September 31st
Me: I never heard those two words in the same sentence until today.
I love the editing sound effects in these videos. I lol-ed when Zach hit the roll bar and the editor put in a smack noise. I love when he throws stuff and a crash noise and cat scream follows!
"if me shaking some roll bars hasn't convinced you..."
Don't worry it has.
Exactly why a good headboard on a ute is important to me
HE SAID “THE LAST DAB”, HOT ONES-DONUT MEDIA ILLUMINATI CONFIRMED
i think of wax to be honest
the collab we didnt know we needed!
Let’s be honest if you think of weed I can’t trust you behind a wheel. Lol
Nah but HOT ONES needs to collab with donut
i hears a rumor that pumphrey is going to be on "hot ones" lets get this moving.
@@Mee2__ sorry, i forgot they have had multiples on before, maybe donut should make their own knock off "Not One's" style
10:04 or... you know... Padding work too.
These videos are like the opposite of clickbait. I come wanting to see the difference between cheap and expensive roll bars (which would have been totally fine) and get a 2-for-1 car and fork lift drop. I love you guys
This is the official crossover of Money Pit and High Low.
I like how everyone was looking at each other when that forklift tipped over. 😅👍
3 things I would suggest to anyone installing a legit rollbar that weren't covered: 1. ALWAYS make sure ALL mounting plates line up perfectly before drilling and bolting. 2. Also before drilling, make sure your soft top or hardtop will clear the bar and especially the soft top during the closing process. 3. You can get some vinyl trimming to make your interior plastic cuts look stock if needed (I hacked mine up with snips and the trimming worked like a charm). Other than that, this is a great look at what's involved in putting one on. And great to see the style bar tested, I swear everyone in the forums say to stay away from these 😂
I love the description of dom tube. Exactly the opposite of what DOM actually is.
What is it then
What he explains is erw tubing welded seam tubing DOM is seamless
@@steven9492 It means drawn on a mandrel. They take solid bar of steel and draw it throu a mandrel that makes a hole inside. It makes a pipe or tube seamless, and much stronger
“And that’s the last dab.”
*Sean Evans has entered the chat*
I’m glad I wasn’t the only one thinking this XD
*customgrow420 has entered the chat*
Everyone walking around after the forklift fell over - “would ya look at that”
They looking at it like that long neck Buzz Lightyear meme
Just look at it!
TLDR: Haha look at this stupid rollbar, who buys this...(feeling smug about quality rollbar in the home shop)
**A-Pillar folds in worse than rollbar** 17:02
...Whelp
Next time on Money Pit, installing a roll cage in a Miata
The windshield being smashed in is why the a pillars folded a that piece of glass is about 30% of the structural integrity of your roof
@@SHS2018 in my home state, Massachusetts, windshields are always covered by insurance. Out west, they're not. It's fairly common to see windshields damaged by hailstones out west, that may be a major reason. But anyways, I think the Mass laws, (for once), sensibly saves lives. Windshields aren't just for keeping bugs out of your teeth!
@@squirlmy in CA, it's illegal to drive with a broken windshield, and most insurance has a low glass deductible, or they cover it free.
The Rusty Wallace blow up cars in the background are legit. Imo one or the best racers to ever live. My neighbor was family with him so I got lots of autographs.
Somewhere, an osha employee is planning yalls murder 😂
Underrated comment
@@_C0KE there are no accidents
-master oogway
Near miss or not this is totally preventable and should have never happened. They are lucky no one got hurt.
Osha is closed due to covid-19, go wild boys
@@izek402 I am soooo disappointed in myself that I had to look that name up !
14:13 guido when he sees ferrari
yes
Lmao
Cardboard truck 1000 lol
Dude... oil based paint markers... they even have multiple colors. Easier to wield in tight spaces. Also great for marking bolts. Clean and tidy, fit right in the toolbox.👍
7:52 “But one of these holes is tougher than the rest.”
Man if that ain’t the truth
"Buy the roll bar before seats" *high key calls out "Hi Low"*
That neighbor with the other forklift was a character. Put him on the channel!
The “Whelp” reaction looking at the forklift 🤣
I’m just imagine how they’ve asked the neighbor:
“Hey dude, could we borrow your forklift for a moment? We’ve just tipped ours over...”
“Yeah of course, take it, habe fun... don’t kill yourselves!”
the neighbor: what did u need my forklift again?
them: ah yea we just trip our sideway no big deal
the neighbor: ok let me operate the forklift
XD
Yeah thats why the neighbor said yes no problem but I'll drive it myself
I finally subbed to the channel (even after watching for years) because of this show. Leave it up to Money Pit to keep me guessing on what each weeks episode is going to be!
And that's a good thing hah
Money Pit is awesome! I subbed and I'm not even really in to cars.
I watch this vid like once a month. Such a Donut classic
You know, The funny thing is, I don't know Jack about cars. But I watch Donut. Simply because I get a kick out of watching Donut. Keep up the good work, guys.
the only thing missing in this episode was Jeremy Clarkson holding a hammer of his collection
Today we are going to install a roll cage......
With a hammer
@@chrischen6664 actually read it with clarkson's voice
Mum: hey son what u do for work
son: droppin Miata's
1:37 “you think the cheap one will work?” “No it will break” chair: let me show how.
Now I want to see you drop a Miata on a good roll bar.
OSHA: "Screams internally"
13:15 “ I trust this 3rd revision” *cuts to him under car* 🤣😭
Great video! Can we get bloopers!!! That would be a blessing. I can't wait to see all the funny little skits and mess ups that happen hahah
I heard a story a few years ago about a guy in a Convertible Porsche. He was driving around in the Hills of California and got distracted, went off the road and rolled his car. After a few minutes he crawled out just fine and was on the phone with 911 when he heard someone behind him. A truck driver saw the accident and stopped, watched the guy get out of the destroyed car and crawl his way up the ditch.
"Hey buddy, you alright?"
The Porsche driver turned around to acknowledge the Trucker and let him know he was okay, before immediately falling to the ground dead.
Apparently he had broken his neck and when he turned his head it severed his spinal chord and killed him instantly.
✅ Roll Cages are Good 😸
14:14 “yeah we’re OSHA approved, no we’ve never done anything stupid”
🤣
4:09
**My grandma when she's about to drive me home after a sunday visit*
🍩 = “that’s the last dab”
Sean Evans = “heyyyyyy???”
Even $65 is too much 😂 You couldn't pay me $65 to have that shipped to my home, let alone installed on my car.
I rolled a 99 NB miata and spun on it's top ones. I some how managed to walk away without a single scratch.
Wow
i rolled a 3rd gen eclipse, into a ditch that was jus enough to fit the car. had a small back fracture that healed in a month. lucky to be alive rn
@@jawnnydoodlebob7387 that's crazy
i rolled an senna in fh4 and survived
@@kingamnesia4777 your were really lucky
Love this guy he’s got such a bro vibe, he’s always chill.
Osha is pissed right now i bet. They probably got an aneurysm watching you walk on top of a forklift which was on its side not long ago (16:00) lmao. So many violations, but hey, its not a work site so its legal 😂😂
We need forklift challenges with you guys.
Get a racing seat to avoid head from smacking the rollbar when "full power" is generated!!
Perhaps a bar pad too
It’s pronounces “fullpowababy”
100 hp ain’t gonna kill him 🤣
All that 100 horsepower
@@zappedbylife7058 no, but driving a matchbox just might....
Damn, for some reason I thought they came stock with roll bars, thats kinda crazy how convertibles can be street legal with 0 head protection in a flip, yet pop up headlights arent allowed for pedestrian safety.
Well, neither are legal anymore, but both were allowed when the first gen Miata was built.
@@LRM12o8 when did convertibles become illegal
@@mtbsaga3063 Of course I didn't mean convertibles were illegal, I drive one myself! 😅
I meant the "0 head protection in a flip" - part, a.k.a rollbars, they're mandatory now and have been for quite a while.
The surprise in your face when you realized the windshield isn’t even remotely interested in supporting the whole car is hilarious. Yup a hardtop ain’t gonna save you either roll bar for sureeeee
"That's the last dab"
Sean Evans: Hello there
In light of Grant from MythBusters passing recently I think dropping the Miata from a forklift is probably the best thing I could see today.
6:51 - A wild “Sean Evans” magically appears
I came here looking to see if anyone else caught that!
Justin Larsen same lol
We call it The Last Dab because it's tradition around here to put a little extra on the last wing. You don't have to if you don't want to, Zach Jobe.
i giggled hehehe
It might not be JUST the roll bar's design wobbling,it might be the fact that the chassis probably has a lot of rust and weak metal.
Also I wanted to add, when you were talking about the shapes of the roll bars. The triangular shape in the engineering field is called a "truss" it bring the force from a "face" of a shape to the connections of a truss. If you go into a large department store and you look up at the ceiling, you will see metal bent into a lot of triangles too!
15:33
"I used the forklift to lift the forklift."
i used the stones to destroy the stones
the moment his stool broke told me everything I needed to know about how this episode would go
.
Replied
They don't mention this but I see Zach made the right choice in fasteners, which is super important no matter what you're mounting. Grade 8 chromates bolts and nuts.
Love the little background bronco at 15:40
“Let’s make some more holes”
Money pit joke
The welder in me cringes hardcore every time Zach uses an angle grinder without a guard and without gloves, espescially with that 1mm cutting disk. Like yikes man. Literally one kickback, one misplacement, one shitty or bum disk and you're out at least a finger. Big ol nope.
16:26 made me cringe so hard 🤦🏽♂️🤦🏽♂️
The Machinist on me is glad he didn't have gloves ¯\_(ツ)_/¯
Or ear protection either
@@lucysmith4242 never wear gloves while operating rotating equipment lol it could end worse than losing a finger
@@SonophiIe ear protection for weak battery grinder? You have too much time writing these comments
you guys should've filled the miata frame with candy and call it the Miñata
Drawn over mandrel is made from a solid piece of steel being thermally expanded and pushed over a mandrel. Its a seamless tube with no welds.
1:18 when you realize there isn't a September 31st 😂
These guys: Hey neighbor can we borrow your forklift?
Neighbor: sure what for?
These guys: we flipped ours.
Neighbor: ....
Alright now that's the last dab!!! 🤣🤣🤣👌👌👌
I like this channel because it's a modern fun car fans channel. It reminds me of a modernized but still honest version of those car build shows that used to be on tv all the time back during satellite days
6:53 "That's the last dab"
*First We Feast wants to know your location*
6:51
The silence after the car fell, everyone standing there like uhhhhhh 😂💀💀
11: 39 -Zack shakes the Miata. This jus looked funny. ahahha
I did that after putting my roof rack back on.
DOM tubing does not have a welded seam.. it is seamless. Makes great roll bar tubing because it can be sleeved with a very tight fit, and you dont have to remove the seam or get undersized tubing for the sleeve material.
make an episode with "i lost the keys, i donno" 4:09 accent. Much funny.
Soon as he said it I read this😯
Indeed many funnys
Wouldn’t be funny for a whole episode.
That $65 roll bar is god damned exhaust tubing. Who ever sold that needs to be shut down ASAP.
My neighbor told me that when him and his buddies got into racing, they needed a roll bar, that had a vertical tube as well for stability, they didn't have time to actually get a welder and weld a vertical tube, so they fake welded a vertical tube onto it with hot glue, then sprayed painted over it, the car is stripped of all equipment and tech, but the chassi with the roll bar is still on it in his yard. I'm 99% sure that that roll bar would do better
Lmaoo that pickup truck would have caught it if the forklift was a lil over
13:55 - Fail drop test
16:30 - DROP TEST
Thank You
Do a wheelhouse where you compare f1, f2 and all the other formulas
Maybe also indycar
As someone who's been struggling with maths lately, i can say a wheel house episode about all the formulas would be very useful.
I agree. Drop all these on their roof and see which one is best
@@seanroland612 the show would go from money pit to money Marianas trench
As a construction project manager, all the safety issues from your sketchy plans are giving me anxiety as I'm watching that.
F in the chat for the rolling stool. Arguably the best character in the entire show
The forklift getting destroyed made my day!! 😂 cool vid bro’s