Thank you for exceptional and excellent videos. What material are those burnishers made of? Is it possible to make them? If not where one can find them?
Thanks for watching ☺️ I have many things. I bought from used watch tool shop and from Bergeon. It has two type. Push down type and push up type. In this time you should buy push down type.
I am learning to use Jacot tool for burnishing the pivots of my balance staff too 😊 I recommend smoothing out your burnisher with diamond stone to get a better result.
Thanks for watching. I usually use vise for a drilling machine about 15cm x 15 cm. It’s not expensive. Watchmaker’s vise is usually set side of bench, I scared dropped a parts. In this vise, work on inside of bench.
@@tanakayawatch thank you will look in to this! I don't have a lot of room to put a vise so this would be the perfect solution. Is it stable? It looked decent in the video.
Of course,it can do nearly same with lathe. But it can push harder that steel will more hardness and can set a center easily. Other way, Jacot tool can do same to lathe.
Maybe you have not many views but you do make a difference! thanks for uploading very good easy lesson!
Thanks for watching 😊
10 watchmakers have 10 process. I want to introduce one story for young watchmakers. I don’t need too much views 💪💪
Thank you! I enjoy your videos and subscribed to your channel. All the best to you and your family! 😊
Norm in Arizona
Thanks for watching. ☺️
I really enjoy your videos!
Thank you very much ☺️
Very nice. Concise but easy to understand. Thank you. From 🇺🇸 🌎
Thank you very much ☺️
I want to say, watching is not special.
Then take a very easy way.
Gracias por el vídeo.
Thanks for watching ☺️
Отличный инструмент и работа.Спасибо за видео.
Thank you very much 😆
Thank you for exceptional and excellent videos. What material are those burnishers made of? Is it possible to make them? If not where one can find them?
Thanks for watching ☺️
I have many things. I bought from used watch tool shop and from Bergeon.
It has two type. Push down type and push up type.
In this time you should buy push down type.
Thank you, again!
Thanks for watching ☺️
Grear vid.. but shouldn't you lubricate? I think lathe its wearing without oil
Thanks for watching.
I usually not use oil. But put a little oil is better I think too. 😆
I am learning to use Jacot tool for burnishing the pivots of my balance staff too 😊 I recommend smoothing out your burnisher with diamond stone to get a better result.
Thanks for watching 😊
I’ll make more smooth burnisher you said. I have couple of them , Other one is more rough. This one is my favorite 😍
Hi
What is the max arbor length which you can use in this tool?
Thanks for watching ☺️
I think it can do 1mm or less.
But when do thick pivot , can polish 2mm or more.
I like is tools!!!
Thanks , me too ☺️
What is the name of the base holding the jacot tool? I don't have a vise but need something to hold the jacot tool stable.
Thanks for watching.
I usually use vise for a drilling machine about 15cm x 15 cm.
It’s not expensive.
Watchmaker’s vise is usually set side of bench, I scared dropped a parts.
In this vise, work on inside of bench.
@@tanakayawatch thank you will look in to this! I don't have a lot of room to put a vise so this would be the perfect solution. Is it stable? It looked decent in the video.
It’s no problem for Jacot tool. If it moved you should put some RODICO ☺️
これはほぞの研磨でしょうか？ 昔の旋盤？
ホゾの研磨用の道具です。作った天真や歯車のホゾを磨くと同時に加工硬化させてよりスムーズに動く様にします。
これは違いますが、同じ構造で旋盤として使う事の出来る物もあります。チャックでワークを噛むより中心が出ますので、より中心に拘る人には良いかも知れません。
私は大抵旋盤で済ませてしまいます。
@@tanakayawatch 加工硬化ができるんですね。 でも、田中さんが言っておられるように旋盤でも可能ですよね。
当時の人の工夫というか 技術が感じられます。
凄い世界ですね。
昔の人は色々考えてますね。
旋盤で切れないバイトで切れないなと思っている時は、ワークの表面を滑らせてしまっていて、勝手に加工硬化させて、さらに切れなくする悪循環になります。
Il filo per archetto dove lo hai comprato?
Thanks for watching 😊
I use the SHAMISEN's line , it's a Japanese guitar. 🎸
有车床是不是就不需要这个工具了？
Of course,it can do nearly same with lathe. But it can push harder that steel will more hardness and can set a center easily.
Other way, Jacot tool can do same to lathe.
Вітаю, дуже важливо знати,ви напишіть назву цього приладу і де можна купити цей прилад 😊❤
Thanks for watching ☺️
Tool name is JACOT-TOOL. Bought from second hand shop.
You should get it e/bay easily.
Sorry for what this Jacot tool?
Thanks for watching ☺️
It’s a polishing tool for a pivot.
Balance staff and wheels.
Putting the bow string on more easily can be seen at 5 min 40 sec of ruclips.net/video/4pK3O43Jddg/видео.htmlm40s
Thanks for watching ☺️
I’ll check it. Very thanks.
I want to learn more.