This is a MUST DO MOD! If you have a PW80 this completely wakes it up! Feeling generous? Buy me a coffee to help support my videos. www.buymeacoffee.com/Cornped
@@Corn-ped model # please and what mods do you recommend I just picked up this Pw80 but I don’t know what year it is it appears like a 2004 I can’t find the serial on the handle bar frame
@@cii5korea217 They only make 1 pipe for all pw80s 91-06 the exhaust # is FATTY 024034 and there are two silencers powercore 024037 and turbinecore 024038
Hey this was great. But i have a question . So latley with my pw80 i changed the air filter to let 10x more air in and now it starts to easy all i need is a touch of throttle and it starts right away i also replaced the pilot jet and high end mixture screw but it doesnt seem to make any difference they were diffrent. So basically my problem is it lacks power but it doesnt bog and starts easy. It also doesnt have much power in the top end it peaks at low rpm. Im new with this stuff. Also sorry if i explained that bad English is not my main language
Did you adjust the main jet? With a high flow air filter you should need a larger main jet. Also if you have the stock exhaust take it off and pull out the washer that is welded into the header at the cylinder header. Also do you know what year it is. The newer ones have a restrictive CDI. You can replace it with an old one or an aftermarket version.
Its a pw80 (A) 2014 modal altho the vin number says 06 but with my exaust it had that washer but not welded it actually said in the manual to remove it for more power but i also removed the air restricter in the muffler so it has maximum air flow and exhaust i assume. Also can setting the needle be an alternative to getting a bigger jet? Thanks for replying.
This is a MUST DO MOD! If you have a PW80 this completely wakes it up!
Feeling generous? Buy me a coffee to help support my videos. www.buymeacoffee.com/Cornped
Please what exhaust model # is that I can’t find one I’m stock for mine thank you
@@cii5korea217 that's a fmf gold pipe pw80
@@Corn-ped model # please and what mods do you recommend I just picked up this Pw80 but I don’t know what year it is it appears like a 2004 I can’t find the serial on the handle bar frame
@@cii5korea217 They only make 1 pipe for all pw80s 91-06 the exhaust # is FATTY 024034 and there are two silencers powercore 024037 and turbinecore 024038
@@Corn-ped thank you so much now by any chance do you know if these are compatible as in exhaust size with the yz85,125??? Thank you again for reply
Great stuff! Just want to ask if the change is really noticeable? Does it compromise top end power?
yeah it is really noticeable. The top end and power is the exact same, but acceleration is way better.
How many horses you think a pw80 clutch can handle? Think it’s better than the tomar disk clutch?
I bet it could handle 20hp no problem. I think the tomar is better.
Hey this was great. But i have a question . So latley with my pw80 i changed the air filter to let 10x more air in and now it starts to easy all i need is a touch of throttle and it starts right away i also replaced the pilot jet and high end mixture screw but it doesnt seem to make any difference they were diffrent. So basically my problem is it lacks power but it doesnt bog and starts easy. It also doesnt have much power in the top end it peaks at low rpm. Im new with this stuff. Also sorry if i explained that bad English is not my main language
Did you adjust the main jet? With a high flow air filter you should need a larger main jet. Also if you have the stock exhaust take it off and pull out the washer that is welded into the header at the cylinder header. Also do you know what year it is. The newer ones have a restrictive CDI. You can replace it with an old one or an aftermarket version.
Its a pw80 (A) 2014 modal altho the vin number says 06 but with my exaust it had that washer but not welded it actually said in the manual to remove it for more power but i also removed the air restricter in the muffler so it has maximum air flow and exhaust i assume. Also can setting the needle be an alternative to getting a bigger jet? Thanks for replying.
@@mushstash7660 Get a new piston to up the compression.
olsen racing, sounds like a danish last name :) iam danish.. cool video
Too much talk about BALLS! lmao
hehe
Yeah, that input shaft is getting no love whatsoever!
Cool
Thanks!
#badnighborsclub
Where's yer hair? Is this even Maize? Imposter if you ask me.
Cut it for spring