Yes, the clay turns white upon firing. The casting was in the mold about 3 hours before demolding. The time will depend upon the dryness of the mold and the humidity in the environment. You can feel the clay in the mold to see if it is tacky to the touch, if it is, wait to attempt to open the mold. Typically the mold will open easily when it is ready.
I am quite new to a slip casting technique. Have made several plaster molds for casting porcelain. And had some success, but recently I have noticed that some of the greenware gets tiny pinholes and then, (because some cups doesnt have it) there are SOMETIMES also pinholes on the glaze. If i got it right, those tiny pinholes are the result of air bubbles or pieces of dust in the casting slip, right? But i wonder, do those pinholes influence the glaze? I am a bit confused, because some of the porcelain cups are not having those pinholes on the glaze and some do have. it fires hire than it should and moreover fires unevenly. pinholes on the greenware? I'm using the vacuum matching,but my slip viscosity 1200
great tutorial, except the temperature to which you glaze fire a clay should depend on the clay body and glaze you use and only a low fire clay/ glaze end at a 06.
Hi, I like this video.....very clean... and very good work. I am looking for the information about soaping the first part of the mold....before you make a second or third part from the Paris plaster. What is a good and safe way of soaping the mold parts ? Thank you Steve
We did dry the greenware before firing. The music is a song titled "Summer Morning" by Ricky VanMan and was royalty free music we found in an iTunes search. Sadly, I just looked for it again and its no longer on iTunes. However, I found it on RUclips! ruclips.net/video/n_3un4Rn6rw/видео.html
Kevin Huff I'm sorry for the delay in reply! I haven't been getting comment notifications. You can find information about the sound track here: ruclips.net/video/n_3un4Rn6rw/видео.html
That's what I've been looking for! Looks like you could use any kind of plastic container that won't leak poor in plaster Paris before it dries press your coffee mug Intuit halfway then let dry 24 hours. Then press other side of your coffee mug into another plastic container What's halfway then you have two halves. Then pour liquid clay which is called slip into the hole that was left in the cast to fill the mold keep topping off and drain after about 3 hours for at least 20 minutes then set aside for about 3 hours before unmolding
Alguien me podría decir que material se utiliza yo tengo muchos moldes k me regalaron pero no se que material es por favor si alguien me podría ayudar serían muy amables
Edgar Aguirre hi Edgar you make it by adding water to clay and mix it with a spoon or I use a hand whisk until it’s the consistency of cream . And then your ready to go.
Видеоклипы
Yes, the clay turns white upon firing. The casting was in the mold about 3 hours before demolding. The time will depend upon the dryness of the mold and the humidity in the environment. You can feel the clay in the mold to see if it is tacky to the touch, if it is, wait to attempt to open the mold. Typically the mold will open easily when it is ready.
Your moulds are so clean 😍😍 I liked them a lot ❤️❤️ and ur mould came out so clean even after removing flower n butterfly 4:57
I am quite new to a slip casting technique. Have made several plaster molds for casting porcelain. And had some success, but recently I have noticed that some of the greenware gets tiny pinholes
and then, (because some cups doesnt have it) there are SOMETIMES also pinholes on the glaze.
If i got it right, those tiny pinholes are the result of air bubbles or pieces of dust in the casting slip, right? But i wonder, do those pinholes influence the glaze? I am a bit confused, because some of the porcelain cups are not having those pinholes on the glaze and some do have.
it fires hire than it should and moreover fires unevenly.
pinholes on the greenware?
I'm using the vacuum matching,but my slip viscosity 1200
oh..very beautiful work
How long did you leave it to dry before you removed it from the mold?
Did your piece have to dry prior to firing???
Is the slip a mixture of clay diluted woth water?
My class was bery interested and will be trying this tomorrow. :)
But how did you make the mold?
great!!! thanks a lot
Did your grey slip fire white?
What is added to the clay to be cohesive to make plumbing molds from it ?thank you
Se puede llenar con cemento?
great tutorial, except the temperature to which you glaze fire a clay should depend on the clay body and glaze you use and only a low fire clay/ glaze end at a 06.
Hi, I like this video.....very clean... and very good work.
I am looking for the information about soaping the first part of the mold....before you make a second or third part from the Paris plaster.
What is a good and safe way of soaping the mold parts ?
Thank you
Steve
In the USA we have a product, Murphy's wood soap. 3 coats, drying completly between each coat.
where i can buy or order to make this template?
We did dry the greenware before firing. The music is a song titled "Summer Morning" by Ricky VanMan and was royalty free music we found in an iTunes search. Sadly, I just looked for it again and its no longer on iTunes. However, I found it on RUclips! ruclips.net/video/n_3un4Rn6rw/видео.html
So Beautiful
How much does slip cost I've been making my own out of old Clay I had it's pretty good drops sodium silicate in it
Ond posso ncontrar ssas formas d cancas?
Can you tell me what the first music track is here? I LOVE IT. Have a link?
Kevin Huff I'm sorry for the delay in reply! I haven't been getting comment notifications. You can find information about the sound track here: ruclips.net/video/n_3un4Rn6rw/видео.html
thanks
Good job! Do you have any tip on where to buy KT 1-4 Kentucky Ball Clay?
Art supply stores that college student use.
Do you know what are the factors that affecting the casting rate/time?
He said several variables including how moist the cast is he said this cup he let dry for 3 hours before you poured out
Que cono y biscocho usaste.
Muy apreciable, lo espaciado del video para su entender!
Solo falta temperatura y cono.
Para esmaltes yo utiliso cono 05
Que seria una temperatura de 1030 grados centigrados aproximadamente
yo quiero aprender hacer cerámica ya que yo hago bisuteria y quiero hacer mis propias cuentas. gracias por el tutoríal
How many minutes after, the poured balance slipary can remove back.
In normal conditions 20-25 minutes
Dear Sir
how can i have a complete training course for slip casting?
thanks. Is this plaster mold ?
Yes it is a plaster mold.
the art of manufacture.
Where do you get your molds ??
That's what I've been looking for!
Looks like you could use any kind of plastic container that won't leak poor in plaster Paris before it dries press your coffee mug Intuit halfway then let dry 24 hours. Then press other side of your coffee mug into another plastic container What's halfway then you have two halves. Then pour liquid clay which is called slip into the hole that was left in the cast to fill the mold keep topping off and drain after about 3 hours for at least 20 minutes then set aside for about 3 hours before unmolding
Were can I get a mold made like this one
www.creativeparadiseceramics.com/ProductDetails.asp?ProductCode=3976
how do I buy this mould for casting a mug.m4v
www.creativeparadiseceramics.com/ProductDetails.asp?ProductCode=3976
maravilhoso
bueno
Your video only explained in detailed, for you hundreds of likes
V GOOD
شكرا جزيلا لك هذا الفيديو الرائع
سؤال
هل المادة المستخدمة هي طين عادي ام ماذا
أرجو الجواب من كل من يعرف
شكرا لكم 🌹
كلا ليس الطين العادي
@@sandgrains3418 السلام عليكم ورحمة الله وبركاته ماهو الطين المستخدم لصنع قوالب للسباكة المعدنية ليكون مقاوم للدرجة الحرارة العالية
@@user-vg2tr4bc6k ليس لدي معلومات،، توجد قنوات تنشر محتوى يخص طلبك
Sir please can you tell how to make liquid clay????
You buy powdered clay Add Water mix.
Super.👍❤️🇦🇿
Onde encontro essa forma?
Se encargan a quienes elaboran moldes de yesso.
intro trakkk is sikkkk
gostaria de aprender
Alguien me podría decir que material se utiliza yo tengo muchos moldes k me regalaron pero no se que material es por favor si alguien me podría ayudar serían muy amables
Borbotina...luego se lleva al horno
hi where can i buy liquid clay
the liquid clay is just the same clay he is using but with more water in it
but where do they sell it at
Edgar Aguirre
hi Edgar you make it by adding water to clay and mix it with a spoon or I use a hand whisk until it’s the consistency of cream . And then your ready to go.
Ceramic thread guide polishing machine
Хопа и я тут такой )
1:38 remove ear buds
FYI Music was too loud and annoying