Einhell TP CD 18/80 Li i BL cordless screwdriver test and comparison
HTML-код
- Опубликовано: 30 июн 2024
- Hello together,
In the video we look at the brand new Einhell TP CD 18/80 Li-i Bl cordless screwdriver.
Thanks for watching !
Here are the links to the screwdriver and the others tested:
If you plan to buy the screwdriver on Amazon and use the link below, I will receive a commission. In this way you support the channel and me by testing more devices. At the moment everything is privately financed, which would make things easier. Thanks so much!
geizhals.at/wishlists/3257697
Einhell TP CD 18/80 Li-i BL amzn.to/3vsSiH2
Makita 483 amzn.to/48itJeq
Makita 487 amzn.to/3O3hU3A
Ryobi R18 DD3 amzn.to/485ewgi
Makita 458 amzn.to/3ursF9e
Makita 485 amzn.to/3Q6W9QV
AEG Subcompact Solo amzn.to/3Ye4XI8
AEG Subcompact with batteries and charger amzn.to/3q9bBTD
Einhell TP CD amzn.to/3XOLhKZ
Einhell 18/35 amzn.to/3XUeap0
Einhell 18/40 Li amzn.to/3PYAwUm
Einhell 18/40 Li BL amzn.to/3pIqADV
Einhell 18/50 Li Bl amzn.to/3JYsM0F
Einhell 18/47 Li E amzn.to/3PSrwjD
Einhell TP CD Li Bl amzn.to/3XOWhrH
Einhell TE CD 18/45 3X Li amzn.to/43xnQ9X
DeWalt 805 amzn.to/44rItpr
Bosch 18V 40 amzn.to/44J0Ci9
Bosch 18V 60 amzn.to/46JbI8V
AEG BS18G4 amzn.to/3OgJlI2
0:00 Introduction, feel, innovations, expectations, hopes
4:30 volume
4:56 Drill chuck
6:00 rpm
6:23 Drilling concrete
7:07 Torque test
10:25 Auger drill
11:20 Screws
11:45 Clutches
13:19 Torque diagram
14:40 Diagram of auger drill
15:35 Weight chart
16:01 Diagram volume
16:35 Chart prices and conclusion
#diy #test #review #akku #18v #einhell #schrauber #bohren #allaboutcars #car #2023 #kwb #dewalt #spax #allaboutcarstools #dewalt #aeg #bosch #amazon #makita #ryobi #2024 Авто/Мото
Das Bohrfutter ist komplett aus Metall. Fakt!
Servus ,
Danke für die Info ✌️
Kannsr du mal den kleinen Impaxxo 230 von einhell testen?
Servus,
Sehr gern, muss mir nur was einfallen lassen wie ich das Drehmoment messen kann, deswegen teste ich kaum Schlagschrauber, nur Drehschlagschrauber, bei denen das maximale Löse oder Anzugsmoment nicht so wichtig ist.
Bin mit dem Test vom Alten TE CW LI Bl nicht ganz zufrieden 😅. Es fehlt das maximale Drehmoment.
Werde mir aber diesbezüglich noch etwas einfallen lassen.
Viele Grüße
@@AACT_All_About_Cars_And_Tools sind nicht beides drehschalagschtauber? Oder verwechsle ich da was?
Eigentlich hast du Recht.
Alle Schlagschrauber sind eigentlich Drehschlagschrauber, sie drehen und schlagen. Wenn man auf verschiedene Seiten schaut, egal ob Hersteller oder einer Verkaufsseite, trennen sie Drehschlagschrauber mit einer 1/4 Bit Aufnahme und Schlagschrauber mit einer Vierkantaufnahme.
Ich finde bei den Schlagschrauber mit Vierkantaufnahme, sollte man keine allzugroßen Aufgaben machen wie Radmuttern lösen, da die Bits oft kaputt gehen und man sich dabei verletzen könnte.
@@AACT_All_About_Cars_And_Tools da hast du Recht, ich verwende nur Impact Bits um dem vorzubeugen und bei dem 1/2 Zoll nehme ich immer schlagnüsse
Ist das wie eine 700-800-Watt-Bohrmaschine?
I don't get your torque testing. Obviously screwing in screw depends in material that you're screwing in etc. so it's not using full torque, especially that the material was visibly drilled already so was providing less resistance, so for the same power you get higher RPM and less torque. Why not measure stall torque, then you can compare each drill in exactly the same conditions and measure absolute maximum torque they can provide, not what they provide in specific conditions, depending on the wood you used at the time, how damaged it was etc? Obviously when screwing screw into soft wood it will be rotating with higher rpm and lower torque than if using some very hard wood for example, so this is not consistent test and it's not showing max torque it can provide.
Besides that thanks anyway, I just ordered mine :)
Servus,
Ich habe schon einige getestet, im weichen Drehmoment kommt man so gut wie immer aufs gleiche Ergebnis.
Ich habe es in Hartholz, Weichholz, vorgebohrt, ohne vorbohren , verschiedene Schraubengrößen und sogar mit verschiedenen Holzbohrern ausprobiert.
Man kommt so gut wie immer aufs gleiche weiche Drehmoment, welches bei manchen Akkuschraubern genau gleich ist, bis auf die Nachkommastelle genau, und bei manchen schwankt es teilweise deutlich.
Freut mich, dass du dir einen bestellt hast, fühl dich frei zu berichten wie du ihn findest.
Viele Grüße
how are you liking your 18/80nm einhell? I found this video during my research for this model. Don't know if I really need it, I could get the 60nm for example. But I'm kinda thinking buy best, buy once mentality.
Going to renovate my whole house soon
@@robtownsend3058 for now I love it :) but my previous one was some shitty cheap Parkside so it's like comparing lambo to opel :D really high torque, I think even too high sometimes like when I was putting screws in something soft even on lowest setting it was over screwing them, but feels solid, does everything I need it too and battery (2,5Ah) seems to last really long. I'm not doing much, some DIY stuff only, but for my use case it's perfect. I bought also corded drill (also Einhell) as my current one is mounted in this drill-press-like thingy, so I would not need to take that one out if needed, thinking I will use it when I'll need something stronger but I haven't used it once yet as this cordless does everything for me :)
18/50 tp-cd 18/60 dan hicbir farki yok
Servus Abdullah,
Bei meinen Tests haben sich schon einige Unterschiede gezeigt, ich empfinde sie nicht als gleich.
Beides sind aber super Akkuschrauber.
Viele Grüße
Bin eben auf deine Tests gestoßen, muss sagen bin beeindruckt von der Menge an gesammelten Daten.
Habe dann gleich mal deine Videos durchgeschaut, den tp CD 18/50 habe ich nicht gefunden. Nur den den te cd 18/50.
Liebe Grüße
Sorry aber Stummfilme war einmal
Servus Wolfgang,
Ja inden 20ern und 30ern. 😂
Werde es in Zukunft besser machen.
Viele Grüße
Amateurhaft
Servus Ferdi,
Vielen Dank für deinen Kommentar.
Könntest du bitte ein bisschen ausführlicher beschreiben was du als amateurhaft empfindest.
Danke und Viele Grüße