Train Sim World 2: Sand Patch Grade - Powering America Part 1 & 2
HTML-код
- Опубликовано: 8 сен 2024
- Hello everyone!
Today I'm going to continue our adventure at Sand Patch Grade route in one of the scenarios on our journey through Train Sim World 2.
--------------------------------------------------------
Do not advertise in the comments.
Do not send links in the comments.
--------------------------------------------------------
-------SYSTEM SPECIFICATION-------
Processor: Core i7 9700k (4.8GHz OC)
Motherboard: Z390
Graphics: RTX 3080 10GB
RAM: 32GB DDR4 3200MHz
Disk: 1TB M.2 NVMe SSD + 4TB HDD +1.9TB SSD
------CONTACT INFORMATION------
email: laturhusky@gmail.com
Twitter: / laturhusky
Discord: / discord ⟸ JOIN NOW!
Telegram: t.me/Laturhusky
That saved time on loading when you connected the other 27 wagons [26:30]. They loaded "automatically!" lol
Thank you,that hill isn’t no joke🙏🏾💯
I played part 2 earlier and I did not know about that red I was going track speed past the yellow and applied emergency as soon as I saw it was red in 200 yards had no chance.
Thanks fluffy, you’ve saved me so much frustration with your videos that if it weren’t for you I’d quit playing this forsaken game a long time ago. Keep doing what you do it’s really appreciated by all. :)
same here. I had so much frustration with my train stalling on the inclines. Fluffy saved our wallets
Yeah they need better Tutorials.
The whole time you spend switching cars at the Yard could be the perfect spot.
You get 2 machines in tandem all the time, so how about we show you how to make them work together. 3 or 4, in single unit or multimodal configuration.
If it wasn't for your vids I'd bee so angry at this game right now.
I’m glad you enjoy my videos. I’ve seen you left so many comments. I loved to read your thoughts and impressions :) I hope you’ll enjoy other videos of this series, the same as I enjoyed making them :)
Your videos have been a great help. Can you please retry this scenario because many players are suspecting there is a bug after recent updates that causes derailment while using dynamic brakes. I'm getting the same problem even with your setup. It'd be nice to have a veteran's opinion on this whether it is a bug or not lol.
Ok. Today I got it. I Play on PS5 and they changed the behaviour of the brakes. Last year you had to Drive How it is shown in this Video. Using the Dynamic brake. Now you have to use the automatic brake but very careful. When at 100 use the Independent brake very careful. When also at 100, then use the Dynamic brake but only to Maximum 2. Drive slowly and try Not to use the Dynamic brake. It Took me 30 Minutes longer but I came Home safely
I appreciate this comment, I was seeing comments reporting the issue and hoping somebody found a way through it
I keep derailing around 1:34:33. I am always gently breaking yet my train literally just jumps off the tracks, any tips?
I had the same problem. I slowed down to about 15 mph around the area where I would derail. Made it thru and slowly picked up speed coming down the grade
definitely my second favorite mission on Sand Patch Grade
Thx bro i have play this mission 9months :)
No problem 👍
I really salute u…it took me 4 weeks just to get up that hill🤦🏾♂️
Great run, i did a lot of mistakes in the part two. Had trouble with the down slope :(.
That slope can be very demanding if you don't set your locos correctly. Keep trying.
@@FluffyAdmiralCan you make a video, how to set the locos correctly? It would be verry helpful :)
@@florianschurer8579 I'm going through the set-up at the start of second part of this scenario. It starts at 28:07
I didn't know that surprised signal was there. I failed the mission for passing the signal at danger. Man, was I mad.
Sitting in chair you may use left and arrows keys to observer display and so on. Also, sitting, you can "teleport" by Crtr+"-" or Ctrl+"+"
I'll check that out, thanks for advice, didn't knew about teleport thing.
To properly teleport to end of train, before teleporting activate external view, PC key "3" and again activate external view (press 3 again). You'll move camera to end of train. Then press "1" and return to front cab. Then press Ctrl-"-". Voila! you are sitting in the rear locomotive.
so useful
Can u teleport on the Xbox version?
I really enjoy playing Sand Patch
To: Jeff Favignano: Why did you use your bell constantly in Trains 2020: Final MP15DC Run!
9 miles over the speed limit YOUR FIRED!
Watch out for the those hills they'll take your train every chance they get. 🙃
Whistle boards mean there is a crossing up ahead. 2 long one short one long across the crossing
You didnt turn on banking comm on the rear and only on the front loco. Should only one have it on?
Love the vids, great tutorials for having fun - yet with this one I'm having roll back issues after the sneaky yellow light immediate red light combo. Sad thing is I'll have to restart and hope it'll work out better next time :(
edit:
I literally CAN NOT set my train up perfectly, I redid it according to your vid for like the 6th time and it still struggles and wheelspins etc. even when I just want to start the train...
Same thing for me. This game utter bullshit way too often. I can't move a single inch at that spot.
@@i3lackflo I hate how a relaxing game sesh turns into a ragefest in such short time... Hours wasted on this bs game because even if I follow fluffy's tutorial things might not work out
Hey I love the videos you give like the best tips to me...I don't have this game yet because I need to see how these operate a bit more before I buy. But just wondering why are you driving with the outside view.. Probably the only thing I don't like about the video.. Those trees are annoying bro... LOL Peace Stay Up
Thank you, I'm glad you enjoy them :D To answer your question. I select the view based on my viewer's feedback. I understand that some may prefer me to stick only to cab view as it is most realistic one, but some viewers would also like to see the gameplay from other perspective and that's what I'd like to achieve. Some videos will include mixed perspective, some will be focused only on cab view and some will be recorded from external view. Later on in this series you will find more videos recorded from the cab.
You can get tsw2 for free until the 5th of August at epics game store
Done:) 🎉🎉🎉
You made sense out of this game
With PlayStation I Took your Setup 1 year ago and Part 2 worked Perfect. Last few days I wanted to Play it again but there is derailment. I Can do what i want, i have no chance. So I Think DTG had an Update with a Bug.
Just a suggestion..Ride in the cab. You might miss less crossing W signals. Viewing your video from external camera flying through the trees was tedious to watch. Thanks you posting this video.
i was able to stop juuust in time in fornt of that "nasty suprise" in fact, it was 9 metres.
Nice!
I watched your video while playing the Scenario myself actually. Gave your train / ingame time a five minute headstart. Might be considered cheating but hey it worked :D
How long does it take to get clearance
before you can use your dynamic braking the throttle has to be in Idle for 10 seconds/
And watch out if u do the CN missions the auto racks in Kingston I think it was I failed many a time going too fast
Hi, Fluffy, first of all, thank you for your video. I am trying to do the same mission powering America Part 2, however since it is a long journey, I decided to auto save the progress in the middle, however the problem I am having is that the next day when I try to continue the checkpoint I've saved, I cannot engage the locomotive to move forward, the controls dont work and no power is assigned to the train and it just go to a full stop. Any Idea if this is a bug of the game? I have heard that it was in the past. While using the auto save during a journey, both the front and rear locomotives are started, running instead of just the first one we are driving. Appreciated your help in advance. Thank you
In all honesty, I’ve never used the save/load function. But maybe you should just check if all brakes are released and eventually use bankingComm once more just to make sure everything works.
@@FluffyAdmiral thanks a lot!!
@@edenlincoln check the three switches. I found that the Gen Field switch had moved to the "OFF" posn.
How do know when to use long hood or in two trains and when you use four trains
Question, do you really need Banking Com ? I though the Distributed power fuse was there so the trailing loco at the rear would power itself
You need banking COMM for the rear locomotive to work unless you want to pull dead weight with whatever weight those coal hoppers already have xD
great vid. almost 1k subs! keep it up
Thanks! Will do!
no le carguen gasoil si tien quizas lleguen con el tanque medio lleno quizas 15 o 10 litros tendra para uno o dos viajes
Just a fyi you set up them wrong the distributed power is supposed to be on on all locomotives and so is the radio for them to work properly otherwise u don’t get as much power in return
Three locomotive CSX train
🚂
Csx 109 sand path
Gorrde
How do you control the blue bar, mine is at full throttle going slow?
Blue bar will increase as you add throttle, but if you add too much too soon you will cause a wheelspin and your train won't be able to move quickly.
@@FluffyAdmiral I hit the throttle the same time u did and it still goes full on 4th gear or higher.
@@stash8293 I'm not sure what could be the problem then, perhaps you're not getting any power from the rear locomotive that is supposed to help you by pushing the whole train. You may also try and use some sand while moving off to prevent wheels from slipping and get the train moving.
HI, I have been trying to release the independent brakes but for some reason, it is not happening. Can you help?
Make sure the brakes in the front loco are set to “Cut in”
@@FluffyAdmiral It is Set to cut in. Still not able to release my independent brake.
@@huskal You may try and move the independent brake lever to Bail-out position and hold it there for a second or two.
Also front loco brakes should be set to Cut in and Lead while trailing loco needs to be set to Cut out and Trail. Hope that will help.
@@FluffyAdmiral I'm still in the section where I have to load coal. Even after the bailout position on independent brakes, the train starts to move but the symbol from the independent brake does not go. As per your video from 8:18 to 8:28.
It's not working, the independent brake icon still come up, I did what you do, Full application, and then released, but it's still not working, I really frustrated
Try and pull the independent brake lever lower than UI indicator tells you and hold it in that position for about a second and then release left mouse button, it may trigger then.
@@FluffyAdmiral Finally, I success finish Powering America part 1,
I fixed it by changing the Display setting to low, The issue is with the FPS, as I can't get the objective to complete if my FPS is below 30. When FPS increases to above 40-45 FPS the game registers the brake as being released and the scenario can progress.
@@obopesek wow, didn't realised that's the thing. I'm glad you managed to sort it out. Thanks for the info :)
While a great video, I just have to ask. How do you know the gender of the train? You called it a boy, but how do you know that? Please and thank you
Can we have this game on phones.
CSX two tailer units
Coal
Hi, I've recently downloaded by steam and I am having a strange problem on Powering America Part 2 , right after passing sand patch tunnel while proceeding downhill, even I reduce the speed 15mph train derails and mission automatically re-starting. I've tried to re-start the game but still same, any ideas ???
I never had that issue to be honest, and as long as you follow the signals, everything should work fine. Remember that speed limit increase applies only after entire train passes the sign post. Decrease applies as soon as your loco reaches the sign post.
@@FluffyAdmiral there is no problem about speed limits, the speed indicator is neither yellow nor red, problem is loco derails (crashes) completely, I had the same problem on next missions last part today (coal freight Yoder to Cumberland), with other locos there was no problem going downhill by dynamic and auto brakes, looks like those AC4400 locos have a matter with me :)
You're not alone. All the posts I've found about it say that you have to use the loco brake and be really gentle on the dynamic. If I go above b4 then I derail as well. Also, the loco brake is still on at the very rear loco. You can see the bc goes to 64 when he changes it to lead. You can get it to 0 by pulling the lever into bail off after changing it to lead, or cut in and lead (I can't remember exactly what combo). The train starts rolling without any power at all when the brakes are completely off. I think that's why Fluffy can get away with less dynamic for a while compared to me. I only got the game a few days ago, and it seems that a recent patch introduced the derail issue. Also, just touching the train brake derails it on the down slope after the tunnel.
Ok sports fans, I've got a good one for you. Sand Patch Grade Powering America. I board the train and follow all of the instructions. After establishing slow mode and setting the slow speed to 2 MPH as requested, I get to where it asks me to release the independent brake and apply power. I do this. The request remains, unlike the RUclips videos I've watched. I receive no acknowledgement tone and the message area does not clear. I get the train to 1.8 MPH, and the coal is loading it's face off. I get to the end of the loading. The request to release the independent brake and apply power message remains. I am not told to stop the train, or anything else that I've seen in any of the RUclips videos. I admit to being confused by all of this. Any practical suggestions would be most appreciated.
I found an instance where someone else had a similar experience. I checked my advanced settings and found that the MAX FPS was in fact set to 62, far beyond their reported setting of being below 30. So much for that. I will once again consult the STEAM focus groups for more insight into resolving this puzzle.
Apply and release independent brake once more and hold it on release for about a second or 2.
@@FluffyAdmiral Thanks so much for the suggestion. Unfortunately, I fear there is a larger issue as I tried 5 times to apply and then release the independent brake, holding it in the released position for a nice 5 or 6, 1000s count. I will try to get a more definitive response from our good friends in the STEAM user forum. Thanks again.
I'm stuck on sand patch it won't let me couple to formation the 15 vechile job in the schedule🤦🏻♂️ it let's me do every other run up to that smh..someone help me!!! Lol
What is the scenario name?
@@FluffyAdmiral csx sand patch grade...y102 morning bowl switching Cumberland yard west...I can do the first 11 missions but when I get to the 12th and I have to couple 15 vehicles it doesn't let me?... I even made sure I connected to the other cars at a fair speed I don't get it?
@@coldsummersgzzdageneral5508 I think I know what you mean... Before connecting to them, go out, make sure couplers are released both on your last wagon/loco and wagons you want to couple to. I think I had the same issue in some of the Sand Patch Grade missions. just check out my train Sim world playlist for those :P
ruclips.net/video/Rke6k0CaqQ8/видео.html
check out this playlist ;)
@@FluffyAdmiral I'm gonna try that I have never ever checked the couplers lol thank for the info I hope it works💪
CSX 258
CSX 145
Is this a paid or is that loco in the base game
AC4400CW Should be part of base game if I remember correctly.
You missed every railroad crossing!
CSX 172