This is awesome! OMG Laurens Valk contributed to the project!!! He is absolutely legendary!!! He made so many self balancing Segway robots and his blog on robot square is epic! I own pretty much all of his books, and I built almost every robot he ever published instructions for. If you see my message, please tell Laurens Valk that I'm a massive fan!!!
I plan to make this a 3h class for my subject Mechatronics in Vives university college. If you are from around here you can sign up for this course. :-) Maybe I'll make a tutorial video when that lesson is done.
There is a very detailed explanation of this linking of hubs on Nard's page: hubmodule.readthedocs.io/en/latest/hub2hub/ There are also examples of how this works.
Now we have found how we can make 2 hubs communicate, it should be possible to replace the remote with a smart bluetooth device. That will be one of our next projects. (I have already seen some promissing tests from Nard. 😉 )
Hmm I would have to buy 2 more hubs to make 2 jousting segway walle robots talllyy hoooo will have to save up thanks for the brain jiblet work 10/10 so I'm guessing using a xbox controller is impossible to do with refresh rate no work around?
It should be possible to use a smartphone or some other bluetooth device. Now we have found how to communicate from hub 2 hub, we could try to replace the sender by an other bluetooth controller. Unfortunatly the Mindstorms app only alows RC communication in streaming mode.
Haha, I'm glad you noticed the configurable tracks 😊, I made them especially for this movie. (But of course will be able to use them at events later.) I needed a track that is forgiving for those who get off the track, but still creates a small obstacle to get back on it. (And that can be built up and down quickly in different shapes + easy to carry around.) So buying them will be a bit difficult. :-) But if you have access to a laser cutter you can very easily make them yourself. I went to the local woodshop to buy 2 white hardboard sheets of 244 x 122 cm (=20 euros), drew some racetrack puzzle pieces and cut them out with the laser cutter in our Vives Maaklab. If you don’t live far away I can make some for you, or I can provide you with my digital laser cut files.
Awesome job! I only have access to 1 Robot inventor hub. Do you know if the boost hub could be used as the remote control for hub to hub communication instead?
@@Rixin13 hmmm. Not realy. I have a set of working balancers with control+ remotes. But i didn't make the video because a new Spike firmware update broke the communication code. It works perfectly when you have the old Spike firmware, but it seems silly to install old firmware on your hub, so i gave up making the video... i can send you the code if you want it.
@@DimitriDekyvere thanks for swift awnser, yea sure, ill be glad if i can examine your code. Im looking for a way to control PUp hub vehicle with mindstorms based remote.
@@Rixin13 I have added the Control+ remote control files to this webpage: legostudiovives.be/balancing_lego_robots/ But maybe remote control using Pybricks is a better option now?
Does this remote control solution only work for two hubs of different types (in other words, can you use one Robot Inventor hub to control another Robot Inventor hub?
No, it works with every hub. If you take a good look at the race at the end, you will see that there it are the hubs of the same kind that are connected. But for now all of them run on Spike Prime firmware.
It will be at least two years to fund before it's completely finished, but you will get an opportunity to see it, probably in Summer 2023. It'll be worth the wait!
Oh, and I have one more question: Is there a way to automate this remote control setup, or to make one hub operate another hub without you controlling it yourself? (Like Bluetooth daisy-chaining?)
If connecting fails, try rebooting both hubs. (And make sure you have the right firmware installed on both hubs. Unfortunatly Nard his library doesn't work on the new firmware yet.)
@@-assasin-9787 that is the problem. Unfortunatly you need the firmware that comes with the app version bolow 2.0. (I used 1.5.3 i think). See Nard his github page.
Www.legostudiovives.be/bouwideeen but even better is the balancer that i have made as a fanmodel in the Mindstorms Robot Inventor app. The code and buildinginstructions are in the app and you can use your Spike Prime Robot with that app too.
This is awesome! OMG Laurens Valk contributed to the project!!! He is absolutely legendary!!! He made so many self balancing Segway robots and his blog on robot square is epic! I own pretty much all of his books, and I built almost every robot he ever published instructions for. If you see my message, please tell Laurens Valk that I'm a massive fan!!!
Nice work! They are so small and cute, and also very stable!
Heel vloeiende bewegingen Dimi, geen evidentie om dat te realiseren. Mooi werk van dé LEGO master
Awesome Dimitri!!!
This is so cool!
You are absolutely amazing👏🏻👏🏻👏🏻👏🏻
Awesome! your idea always crazy me ^^*
That is super cool
Can you make a whole tutorial on how to do the coding
I plan to make this a 3h class for my subject Mechatronics in Vives university college. If you are from around here you can sign up for this course. :-)
Maybe I'll make a tutorial video when that lesson is done.
I'd really like to be able to show this off at an Eistedfodd soon. Have you done this using the hub to hub blocks in Mindstorms Robot inventor?
I think it is possible with the Robot Inventor hub2hub blocks. But here i used Nard his python hub2hub communication library.
Can you also make a tutorial on how to link them
There is a very detailed explanation of this linking of hubs on Nard's page: hubmodule.readthedocs.io/en/latest/hub2hub/
There are also examples of how this works.
Thanks.
HI, just wondering if somehow you can have the code on PC and use a phone to control?
Now we have found how we can make 2 hubs communicate, it should be possible to replace the remote with a smart bluetooth device. That will be one of our next projects. (I have already seen some promissing tests from Nard. 😉 )
What is control+ and what program to install on each hub?
Hmm I would have to buy 2 more hubs to make 2 jousting segway walle robots talllyy hoooo will have to save up thanks for the brain jiblet work 10/10 so I'm guessing using a xbox controller is impossible to do with refresh rate no work around?
It should be possible to use a smartphone or some other bluetooth device. Now we have found how to communicate from hub 2 hub, we could try to replace the sender by an other bluetooth controller. Unfortunatly the Mindstorms app only alows RC communication in streaming mode.
Nice work! Where can I get those configurable tracks?
Haha, I'm glad you noticed the configurable tracks 😊, I made them especially for this movie. (But of course will be able to use them at events later.) I needed a track that is forgiving for those who get off the track, but still creates a small obstacle to get back on it. (And that can be built up and down quickly in different shapes + easy to carry around.)
So buying them will be a bit difficult. :-) But if you have access to a laser cutter you can very easily make them yourself. I went to the local woodshop to buy 2 white hardboard sheets of 244 x 122 cm (=20 euros), drew some racetrack puzzle pieces and cut them out with the laser cutter in our Vives Maaklab. If you don’t live far away I can make some for you, or I can provide you with my digital laser cut files.
@@DimitriDekyvere such a generous person!
@@DimitriDekyvere thanks Dimi! only wish I have a Maker space nearby. Once I have access to a laser cuter will let you know!
Great work. My kids only have one Mindstorms set (51515). Would it be an idea to show how to use an xbox controller as a remote instead?
I am working on a LEGO control+ hub remote with Nard at the moment. Coming soon.
Awesome job!
I only have access to 1 Robot inventor hub. Do you know if the boost hub could be used as the remote control for hub to hub communication instead?
I have not tried with the boost hub, but i have a working control+ hub remote now. (Stil working on the video)
@@DimitriDekyvere still workinprogres?
@@Rixin13 hmmm. Not realy. I have a set of working balancers with control+ remotes. But i didn't make the video because a new Spike firmware update broke the communication code. It works perfectly when you have the old Spike firmware, but it seems silly to install old firmware on your hub, so i gave up making the video... i can send you the code if you want it.
@@DimitriDekyvere thanks for swift awnser, yea sure, ill be glad if i can examine your code. Im looking for a way to control PUp hub vehicle with mindstorms based remote.
@@Rixin13 I have added the Control+ remote control files to this webpage: legostudiovives.be/balancing_lego_robots/
But maybe remote control using Pybricks is a better option now?
Does this remote control solution only work for two hubs of different types (in other words, can you use one Robot Inventor hub to control another Robot Inventor hub?
No, it works with every hub. If you take a good look at the race at the end, you will see that there it are the hubs of the same kind that are connected. But for now all of them run on Spike Prime firmware.
@@DimitriDekyvere Got it, thanks! That will really help me control my new flying Mindstorms robot!
@@hydroworld-soontobemigrate6160 Flying Mindstorms robot? 😳 I would love to see that.
It will be at least two years to fund before it's completely finished, but you will get an opportunity to see it, probably in Summer 2023. It'll be worth the wait!
Oh, and I have one more question: Is there a way to automate this remote control setup, or to make one hub operate another hub without you controlling it yourself? (Like Bluetooth daisy-chaining?)
Do you know if there's a way to connect a Spike Prime hub to an Xbox controller?
Yes, that is possible if you use the Mindstorms Robot Inventor app (and download RI firmware to your Spike Hub)
everything was fine with me, but in the end the hubs couldn't connect, what to do?
If connecting fails, try rebooting both hubs. (And make sure you have the right firmware installed on both hubs. Unfortunatly Nard his library doesn't work on the new firmware yet.)
@@DimitriDekyvere I've been doing it all this time, but it still doesn 't work out :(
@@-assasin-9787 what firmware version is on your hubs?
@@DimitriDekyvere if you are about the app, then 2.0.6
@@-assasin-9787 that is the problem. Unfortunatly you need the firmware that comes with the app version bolow 2.0. (I used 1.5.3 i think). See Nard his github page.
Does hub to hub work on other powered up devices too?
Yes it does, but you need Nard his python library to do thay.
How can i get the code
Www.legostudiovives.be/bouwideeen but even better is the balancer that i have made as a fanmodel in the Mindstorms Robot Inventor app. The code and buildinginstructions are in the app and you can use your Spike Prime Robot with that app too.
Have you got the block code?
The buildinginstructions and demo programs (Spike V2 app) are on my website. See video description. legostudiovives.be/bouwideeen/
i cant it help me
? What is the problem?
i can't hub2hub. step3
I installed the hub2hub files. But for some reason an error occurred and I couldn't do it. @@DimitriDekyvere