Let me know if you like these types of videos and want more of them, I can give more of this type of content if you find it useful, remember not all of it means it will be the solution but it can always help to check and maintained these things to help be proactive to keep the bike lasting longer
It happened to me. A customer came complaining of a ticking sound, I checked everything mentioned in the video, plus headset, stem, even cv lesned and greased the rear derailleur.. I didn't change the bottom bracket, it was new, as was the crankset, sram gx with 3 bolt direct mount. I spent a lot of time searching for the cause of the ticking, but I finally found the cause. I checked if the bolts for the chainring were at torque spec, and they were, but that wasn't enough, i had to push the chainring towards the rear while retightening the 3 bolts, and that solved the problem.. yeeey....
@ there is a product that I bought that helped with this. It is called Loc tite 609 retaining compound that fills in microscopic voids and spaces so that the chain ring can’t shift around underload. It seemed to have made it 100% silent now
Love the intro with the backwards helmet with the tags still on. Add that if you find corrosion or are still experiencing headset noise is to remove, clean, and reset the expander plug. I had a really noisy headset that a repair shop could get it to go away for a week or two. I completely disassembled the headset and cleaned all the surfaces and made sure sufficient grease remained. Still noisy. Removed the "bung" and it was dirty and so was the steerer. Wiped it with a clean rag and reassembled. Tightened everything to spec and no more noise.
I had a creak on my Aethos. I checked every thing you mentioned. The bike had 6000 miles on the dub BSA BB, so changed I it. The threads were clean and lubed. I cleaned it and installed a new BB. No joy 😢. I took it back Mikes Bikes where a bought it. God bless the mechanics at Sausalito Mike’s, they retraced all my steps while I watched and collaborated with them. No joy 🥹. They didn’t charge me.. great guys and service. After some though and a month later, I disassembled the free hub and found 1 of the pauls was stuck in the flat position. I cleaned the hub and reassembled it with new hub oil….. and finally…creak was gone for good. I learned a big lesson.🎉
So true. On my HT, Marin bobcat trail I used to get this creaking and clicking while pedalling. I immediately removed the BB (square taper at the time), re-greased the threads and re-tightened it. Same sounds. In the end I realised it was the dirt and sand between seatpost and frame that was thrown in by back wheel through the slit in the seat tube that allows the seatpost to be tightened. Bit of a bad design if you ask me. I now have a piece of old innertube over the clamp and it works.
Excellent how to video. Most all of us have had the phantom creaking noise. And so hard to isolate the problem. Mr GC you know all the big moves. Watching the part about seat post and seat always good to get just an inch off the saddle and see if the creaking or clicking continues.
For the people that are 99% its the BB. Check your chainring bolts or if you have a direct mount chainring, the ring to tighten that down. Also possibly your crank comes loose because you dont have the correct amount of spacers on.
I love this haha. I recently had a Roubaix come in about a creak under load. No noise out of saddle I noticed. Checked the seat wedge. Dirty AF and loose. Noise was gone 😂
My new HT MTB made a creaking sound that I thought was the BB. Took it back to the shop and they couldn't diagnose it. Went to another shop and they couldn't either. I just lived with it for almost a year before I decided to try anti-seize on the pedal threads and that fixed it. Around the same time, my gravel bike (one year old, about 3000 miles) started making a noise that sounded like the BB. One shop insisted it was the chain, (which only had 500 miles on it). Another shop diagnosed it as a bearing in the rear (Chris King) hub needing service and fixed it.
Had this once. Everytime I’d put pressure on the pedals during climbs and intervals I’d hear this cracking. Turned out that my rear wheel hub bearings were just worn out. BB was perfectly fine.
The two times it was not the BB. Cracked rear dropout on an alu bike and f'd cheap vintage wellgo SPD pedal. My commuter square taper gets a new BB every two winters.
I've never seen anyone cook a set of SPD pedals as badly as the ones in this video. I have absolutely abused those pedals for years, done nothing to maintain them and they are fine.
My creaking on my giant carbon cross country mountain bike ended up becoming the Front through axle. I thought it was the bottom bracket nope in fact it had to be replaced with a Maxle standard thru axle . It seemed the 2015 through Axle that came with my rock shocks , wasn’t playing too nicely with my stands carbon wheel hub something about the end caps anyway, it’s very quiet now no issues.
I have a weird click on my Wahoo kicker move. its only when i push down like in a sprint on the left side. I think its the cassette or skewer or something but it almost seems like a bb. I have noticed when I'm riding really hard its almost like there is a notchyness in the bearing but at the bottom of the stroke. if i spin by hand its smooth as butter. I've ruled out pedals as they are much newer but can't figure it out.
@ lmao, great name for it! I also had an issue once with a bottle cage and a particular bottle - a camel back insulated steel bottle. The bottle would rattle in the cage ever so slightly. Not very loud, but the thin-walled large-diameter carbon downtube just amplified it like hell. I only figured it out when I took the bottle out to drink from it! That bottle now only does duty as my desk duty drink bottle. The bottle cage got replaced
I wouldn't make a video where you adjust the stem pinch bolts without a torque wrench. People will see your video and think they don't need a torque wrench. In your case I assume you either have an aluminum steerer tube or you have done this so many times you have a good feel for the torque. Many people have no idea how much to torque those pinch bolts and could get into trouble if they have a carbon steerer.
I have this one creak, everytime on the right pedal downstroke on a brand new bike. Its loud af and I cant seem to figure it out. We tried regreasing the bottom bracket, tightening all the bolts on the bike to spec, new cleats, reinstalling the cranks, now one thing someone suggested I do is add a washer to the crankset so going to try it next week. Any other suggestions would be appreciated
Let me know if you like these types of videos and want more of them, I can give more of this type of content if you find it useful, remember not all of it means it will be the solution but it can always help to check and maintained these things to help be proactive to keep the bike lasting longer
0:18 No SPD clogs? Your game is slipping GC!
This one was great!! You need a nomination for the Oscars man.
The chain ring itself creaks against the spider
It happened to me. A customer came complaining of a ticking sound, I checked everything mentioned in the video, plus headset, stem, even cv lesned and greased the rear derailleur.. I didn't change the bottom bracket, it was new, as was the crankset, sram gx with 3 bolt direct mount. I spent a lot of time searching for the cause of the ticking, but I finally found the cause. I checked if the bolts for the chainring were at torque spec, and they were, but that wasn't enough, i had to push the chainring towards the rear while retightening the 3 bolts, and that solved the problem.. yeeey....
@ there is a product that I bought that helped with this. It is called Loc tite 609 retaining compound that fills in microscopic voids and spaces so that the chain ring can’t shift around underload. It seemed to have made it 100% silent now
this is why I recommend to lubricate your entire body before going on a ride.
there's a reason for it? i was just slathering myself in oil because I can?
Definitely do more of these videos with mechanic tips, common problems and fixes, tips and tricks, etc. I've had problems with saddle rails before.
awesome sounds great
Love the intro with the backwards helmet with the tags still on.
Add that if you find corrosion or are still experiencing headset noise is to remove, clean, and reset the expander plug. I had a really noisy headset that a repair shop could get it to go away for a week or two. I completely disassembled the headset and cleaned all the surfaces and made sure sufficient grease remained. Still noisy. Removed the "bung" and it was dirty and so was the steerer. Wiped it with a clean rag and reassembled. Tightened everything to spec and no more noise.
yea these are the process of diagnosing an integrated bike lol gotta love it
I had a creak on my Aethos. I checked every thing you mentioned. The bike had 6000 miles on the dub BSA BB, so changed I it. The threads were clean and lubed. I cleaned it and installed a new BB. No joy 😢. I took it back Mikes Bikes where a bought it. God bless the mechanics at Sausalito Mike’s, they retraced all my steps while I watched and collaborated with them. No joy 🥹. They didn’t charge me..
great guys and service. After some though and a month later, I disassembled the free hub and found 1 of the pauls was stuck in the flat position. I cleaned the hub and reassembled it with new hub oil….. and finally…creak was gone for good. I learned a big lesson.🎉
So true. On my HT, Marin bobcat trail I used to get this creaking and clicking while pedalling. I immediately removed the BB (square taper at the time), re-greased the threads and re-tightened it. Same sounds. In the end I realised it was the dirt and sand between seatpost and frame that was thrown in by back wheel through the slit in the seat tube that allows the seatpost to be tightened. Bit of a bad design if you ask me. I now have a piece of old innertube over the clamp and it works.
Indeed it WAS the bottom bracket a couple of days ago! The right shell of the square taper BB came loose and it made the worst of sounds 😅
Excellent how to video. Most all of us have had the phantom creaking noise. And so hard to isolate the problem. Mr GC you know all the big moves. Watching the part about seat post and seat always good to get just an inch off the saddle and see if the creaking or clicking continues.
Yea, it is a very common problem and there are always things you can try and do. Glad it helped!
Man I hate chasing creaking. One time I found loose chainring bolts were the issue. Never had that happen before, so don't forget chainring bolts.
yea it is crap especially when you need to figure it out in a customers bike that doesnt want to pay lol
Don’t forget to check the torque on the chain ring bolts… This was the issue on my 24 tarmac sl8 pro.
yea that is also true
For the people that are 99% its the BB. Check your chainring bolts or if you have a direct mount chainring, the ring to tighten that down. Also possibly your crank comes loose because you dont have the correct amount of spacers on.
I love this haha. I recently had a Roubaix come in about a creak under load. No noise out of saddle I noticed. Checked the seat wedge. Dirty AF and loose. Noise was gone 😂
I love it when you get that one!!
My new HT MTB made a creaking sound that I thought was the BB. Took it back to the shop and they couldn't diagnose it. Went to another shop and they couldn't either. I just lived with it for almost a year before I decided to try anti-seize on the pedal threads and that fixed it.
Around the same time, my gravel bike (one year old, about 3000 miles) started making a noise that sounded like the BB. One shop insisted it was the chain, (which only had 500 miles on it). Another shop diagnosed it as a bearing in the rear (Chris King) hub needing service and fixed it.
Thanks. This is so helpful. I only recently went through this very thing
I'm glad I could help!
Excellent video & content. My experience has been at least 70% of the time it’s my quick release/dropouts.
I think that is about right!
I had a out of round rear hub bearing that made a squeak that everyone thought was the bottom bracket
Also check Wheel bearings.
I actually had a brand new Felt that had a bottom bracket creek. Replaced the PF with a Wheels Mfc BB and all has been good for the last 12 years
yea those are great bb
Great work bruh
Thanks bro!
That helps a lot thanks 🇬🇧
jur welcome
Had this once. Everytime I’d put pressure on the pedals during climbs and intervals I’d hear this cracking.
Turned out that my rear wheel hub bearings were just worn out. BB was perfectly fine.
8:01 mark - Where can I find some of your ball sweat? Asking for a friend.
Hahahaha I got it for you by the gallons
I’ve had ticking that was fixed by re-greasing my Dt Swiss hub ratchet rings
That’s a good idea I’ve never thought of that.
The two times it was not the BB. Cracked rear dropout on an alu bike and f'd cheap vintage wellgo SPD pedal.
My commuter square taper gets a new BB every two winters.
Sick helmet usage
its the proper way lol
I've never seen anyone cook a set of SPD pedals as badly as the ones in this video. I have absolutely abused those pedals for years, done nothing to maintain them and they are fine.
It’s Florida so probably corrosion.
it actually happens more then often, a lot of people jsut hammer down here and abuse
My “bottom bracket creaking” turned out to be my rear wheel hub 🤦♂️
usually how it goes
My creaking on my giant carbon cross country mountain bike ended up becoming the Front through axle. I thought it was the bottom bracket nope in fact it had to be replaced with a Maxle standard thru axle . It seemed the 2015 through Axle that came with my rock shocks , wasn’t playing too nicely with my stands carbon wheel hub something about the end caps anyway, it’s very quiet now no issues.
yea people have no idea how often it happens in the axles
Great video 🎉
thanks so much
But it was. Changed it and now no creaking.
had the problem several times on my bikes, most of the time it was just the seatpost.
Loose chainring bolts bolts will do it, too. Easy one to cross off the list.
Nasty ball sweat!
gotta love my job
I have a weird click on my Wahoo kicker move. its only when i push down like in a sprint on the left side. I think its the cassette or skewer or something but it almost seems like a bb. I have noticed when I'm riding really hard its almost like there is a notchyness in the bearing but at the bottom of the stroke. if i spin by hand its smooth as butter. I've ruled out pedals as they are much newer but can't figure it out.
I found some of my cables would rattle inside the frame. man, that was annoying.
yea it needs to have the carbon churro in there
@ lmao, great name for it!
I also had an issue once with a bottle cage and a particular bottle - a camel back insulated steel bottle. The bottle would rattle in the cage ever so slightly. Not very loud, but the thin-walled large-diameter carbon downtube just amplified it like hell. I only figured it out when I took the bottle out to drink from it! That bottle now only does duty as my desk duty drink bottle.
The bottle cage got replaced
Unless if it’s a Cannondale with a BB30…
I wouldn't make a video where you adjust the stem pinch bolts without a torque wrench. People will see your video and think they don't need a torque wrench. In your case I assume you either have an aluminum steerer tube or you have done this so many times you have a good feel for the torque. Many people have no idea how much to torque those pinch bolts and could get into trouble if they have a carbon steerer.
what bottle cages are you using on that bike
Bjorn carbon bottle cages
0:10 Jesus
hahahha I use to play ice hockey
Save your breath, their sport! Lmao.
hahahha
I have this one creak, everytime on the right pedal downstroke on a brand new bike. Its loud af and I cant seem to figure it out. We tried regreasing the bottom bracket, tightening all the bolts on the bike to spec, new cleats, reinstalling the cranks, now one thing someone suggested I do is add a washer to the crankset so going to try it next week. Any other suggestions would be appreciated
I put some anti-seize on my pedal threads and that took care of a creak I had
But I'm SURE it's the bottom bracket!
hahahaha
SL8 is endurance geometry. Change my mind.
Top tube is too long for it to be under the Endurance umbrella , Endurance are always shortish on the top tube to get rider more upright.
Top tube is too long & headtube is too shallow for SL8 to fall within Endurance category.
Top-tube too long on SL8 to consider that frame Endurance surely...and don't call me Shirley😂
I love the geo
8:04
isss good