Great video. This does work for the Rotak 36 except it’s 3 screws on the bottom instead of 4 and unfortunately to pull the motor off requires a big pull/break plastic mould but all works once back on!
One thing you missed was a pin in the hole to stop the blade moving to make it easy to remove. Good video for the rest and i will order the belt and give it a go..
Great video. Did that but unfortunately the new belt keeps on “slipping out” of the bearing when switching the motor on… any idea what I am doing wrong? Does the belt need to be in a particular direction (like one side has to be up)?
Thank you for your comment, if you tighten the belt properly the belt shouldn’t come off, so you need to stretch the belt by pulling the pulley right to the end and then do screws to hold the pulley. I hope that helps .
Hi David I think the belt snap between 4-5 years depends how many times you use it. Normally you will hear the motor is working but the blade is not spinning that means the belt snapped.
Very useful. Thanks. Cross head screws are difficult to get out. Deep in plastic slot and covered with crud.
Very straightforward and helpful. And well done Hazel the rabbit for helping out!
Lol
You helped me a lot installing the new belt on a Gardena model!! Thanks mate!! ❤❤❤
I am glad to hear that! Thank you for your comment.
Be advised my Bosh Rotak 43 had 4x Torq Centre Security Pin screws to remove the top plate of the lawnmower. Underneath were standard Phillips screws.
Thank you for your comment
Very useful, thanks (been searching for a while for the right demo.)
Thank you for your comment
Great video. This does work for the Rotak 36 except it’s 3 screws on the bottom instead of 4 and unfortunately to pull the motor off requires a big pull/break plastic mould but all works once back on!
Thank you for your comment
One thing you missed was a pin in the hole to stop the blade moving to make it easy to remove. Good video for the rest and i will order the belt and give it a go..
Thank you for your comment
Thanks you.
This instruction made the process of identifying and fixing the fault so much easier!
By the way, that's a lovely Rabbit :-)
Thank you very much for your comment I really appreciate it.
Thank you Adnan for giving your hand on my lawnmover :D
My pleasure
The real star of this video has to be Hazel❤
🤣
Great video. Did that but unfortunately the new belt keeps on “slipping out” of the bearing when switching the motor on… any idea what I am doing wrong? Does the belt need to be in a particular direction (like one side has to be up)?
Thank you for your comment, if you tighten the belt properly the belt shouldn’t come off, so you need to stretch the belt by pulling the pulley right to the end and then do screws to hold the pulley.
I hope that helps .
Thank you very much! 🤝
My pleasure
Maybe a good idea just to put the belt in hot water for 5 minutes to soften it up and then it slips on without taking the pulley out
I think still too tight, thank you for sharing your thoughts
Спасибо мужик!
My pleasure
How do you know when to change the belt? Does it snap or loses power?
It snaps .
@@adnanalyemeni7258 thank you
After how many years did you changed it? When do we know we have to change it?
Hi David
I think the belt snap between 4-5 years depends how many times you use it.
Normally you will hear the motor is working but the blade is not spinning that means the belt snapped.
@@adnanalyemeni7258 there is some difference between this and rotak 36R?
@@david14exe not really same motor
The numbers you see is actually the length of the blade in centimetres
36
37
43
And so on
@@adnanalyemeni7258 are they reliable? I saw some comments such as they don’t last
@@david14exe they are ok for small gardens
Hi. Where can be belts be buy? Which web site?
EBay
Or online
Were can I get the blade and the belt from.
Thanks hope to hear from you
You can get them from eBay and Amazon .
Very helpful.thank you
Thank you for your comment.
Thank you! I thought it's not so complicated (I mean time absorbing).
Thank you for your comment
Awesome! Thanks.
My pleasure
Молодец всё чётко
Спасибо
What about 32r what belt do i need pls how do i look for it on ebay
Hi
I found them on eBay , just type Bosch rotak 32r belt and they will come up.
I hope that helps! Let me know if you need more help.
www.ebay.co.uk/itm/274722380042
This is some link too
@@adnanalyemeni7258 thanku so much i really appreciate it
Yy
Yyyy
good job help me out to fix mine , thanks ,
My pleasure kieran
Perfect, thanks!
My pleasure