Wax up and mock up. Treatment Planning.
HTML-код
- Опубликовано: 2 янв 2016
- Material from: dr. Bartosz Matejkowski
www.matejkowski.pl
Movie is about first stage of treatment. Patient has a teeth wear and lack of them. Stone casts were made and diagnostic Wax up. Then silicone tray was prepared during the visit at the dental chair. Mock up has been made with an acrylic material.
Nice music, almost started crying🤣
What’s the piano piece tho? Would like to listen to the full version ;D
@@karolinakumidor5634 Una Mattina by Ludovico Einaudi
@@mohammedrefaat2977 man u U R GOD SENT thank q sooo much
This is exactly how I do mine, altho I do etch a little bit. Then after the patient has adjusted to it I can prepare one or more crowns and make the change over. Well done video, a credit to you. I have developed a line that helps patients get used to the new bite. I say to them,
"It will take 3 days for your brain to write new software for this bite. You will hate me for 3 days, but I don't want to hear about it. Then on the fourth day you will find that you are using your new shapes quite well, and after that they will seem like they have always been there"
Since I started telling patients this bite difficulties have dropped to zero.
Haw can you adjust the anterior tooth that fracture
@@Anas_93_Dec I am sorry I dont understand what you mean by adjust. If you need to reshape anything you grind with a drill, smooth with snapper and finish with a diamond point.
Is this permanent?
@@relyrely1101 No it is really only a pattern. It may last 2 weeks or it may last 6 months. So you put this on, then prepare a quadrant for crowns, inlays whatever. Then use the same impression to make the temporaries. The beauty of it is that while you restore one side the other side is stabilised and secondly the patient has their new vertical dimension and can start getting used to it.
@@johnfenn what name of white material ?
Really fantastic work 👏
Thank you very much for sharing.. beautiful ❤️
what is the matetial being used?is it luxa temp...used for temporary crowns
Seems magic 🎩 ✨
Thank you 💜
what is your protocol in this case?
you put something, like vaselin oil, on teeth to not bond material, make mock-up and then? you adjust form, occlusion and other things then do you take impressions to make provisionals?
Nice video!
sir vry informative video,jst want to knw that by hw much u have raised the bite, i mean (mm). that mock up is without prep?plz let me knw sir.
Thank you
Pls how can I get this procedure and where in Orlando Florida more information pls Thanks
Como consigo información del procedimiento?
Is that prepless restoration?
is that temporary?
Not.why y didnt use etching & bonding resin befor compsit resin vienirig of lab.surface ??!!!
No teeth preparation?
Hvala
Goood video thanks too much
Perfecto👍
How do you remove it? Drill it off? If you were to use this same matrix over preps, would you be able to without having the temp get stuck in place? Also, with this one you made for using only a few days, will you trim the margins around the tissue, or leave it?
It just pulley's off with a scaler.'
how long as max patient can keep it on.
Few days
Как называется материал?!?
Que materiales usan para los dientes artificiales. Que marca es o Como se piden en la dental?
Es resina bisacrilica, y el procedimiento se llama mock up
Nice Solution . but how much does it last to hardens in the mouth and for how long can last for the patient ?
it take like a minute in mouth, and remains for days-weeks
How long does this mock up last ???, and can this mock up be done with some material that will last much longer time ?
hi, then how can you remove it??
They just seeing his teeth frame
I dont understand... Is this procedure just for looks? Or for an impression of later made crowns? Implants? Can you actually chew food with this or are they like dentures
juan Samaniego it is temporary, only to let the patient know the looks of his future FPD, and to test the occlusal vertical dimension, so neither etching nor bonding is used.
upper right midline shift, hard case specially with compromised centric relation
definitely it is not an easy case
How can you get the yellow dental work white again?
this is only mock up. so it is only for couple of days. But if it will get yellow because of the food I advise my patients to brush teeth with baking soda
Bartosz Matejkowski hello so is it not permanent solution for those who have gap between teeth ?approximately how much it can be longer ?
How are they removed????
They don’t stick to the tooth surface very firmly. No bonding, anything. It’s just a test-drive to make sure that patient’s and dentist’s vision is the same for the final result 😊
Cuanto tiempo dura en boca este material
2 dias
Looks better than initial, definitely. But patient can not clean interdentally. Cervically the gums are pressed by the material - which is a temporary resin material by the way…- and given that, the gums will recede pretty quickly and badly.
It’s only for planning the treatment. It’s temporary
can we do veener preparation on the same restoration using it guidance
of course.
hey doc. have you raised VD in this case . have you make preparation of 46 before giving mock-up
Dear @vishnu Mittal. Yes I raised VD but I did not do preparation. Warm regards.
How long pt will wear it to adapt for new VD till final restoration done ,,,,thanks
Mehtab Diab about 3 mths
what is the tray made of?
suhail here heavy body of polyvinyl siloxane
What material did you use to make tray for mockup
Silicone
@@furqansalamissa512 C
Where is the music from?
Una Mattina by Ludovico Einaudi
what will be your planned final restoration for this teeth
Crowns or bridges. My preference was Cerec only done with a material called Enamic. I could do may 5 teeth in an afternoon. so 3 visits for the upper and 3 for the lower.
How stable is the mock up.what if you eat hard food.
@@dulcepinili998 Not very. I used to say this is only for smiling at the girls OK? Then they would want an emergency visit because they broke it eating almonds, or corn on the cob. Which was interesting because within 2 or 3 days they are so used to the new bite that they eat such things. I also invited on restoring the posteriors first, because if you did theanteriors first they would not come back, until they had broken the crowns all out. You must have posterior teeth to protect the anteriors.
Mi pregunta es? El px va a pagar buenas coronas? Porcelana, emax zirconia ? Porque michos malos doctores quieren dejar solo acrílico o materiales de mala calidad porque el px no lo puede pagar. Al menos en mexico coronas de buen material por 16 dientes serían como 80 mil pesos mexicanos en usa sería mucho más
Sí tienes razón al pasar del tiempo el acrílico cambiara de.color y tendrá mal olor.me gustaría que las casas de ventas de materiales dentales no vendan tan cara la porcelana así los precios para pacientes no sería muy alto y habría accesibilidad para todo tipo de pacientes de bajos recursos económicos .saludos desde Perú
@@scatmanjohn6193 no solo eso, muy aparte del mal olor del acrílico sumale su irritabilidad a mediano plazo para con las encías.
Cuantos es 80, 000 piso a dinero de usa
Which material r u using in tray??
I think it is a heavy body rubber base impression material.
Great
is this permanent?
Selena Lopez no. :)
Eso es mta mal, debería ser diente a diente y dejar espacio para el uso del ilo dental.
зубы как-нибудь обрабатывались перед установкой
what about floss space?
Im a dental student, so I dont know much, but I think mock up is only use to test VDO and see how pt likes the way his future crowns will be. So no etch and bond here (look how glossy the enamel is before he seat the index)
Yes. It is only for testing.
@@bmatejkowski good job dr how you determin the exact dvo of patients
Какой кошмар!!! Хоть бы попытались по убирать нависающие края композита с маргинальной десны!!! Там через сутки гингивит начнётся. За полировку я вообще молчу......короче для глубокой сельской местности с натягом прокатит, но не более того. Вернусь к началу - какой кошмар......
Как всегда найдёт прыщь , который докопается. Смысл ролика до вас не дошёл.
please can you tell the name of this matérieux
You mean material for mock up?
@@bmatejkowski yes please
Is this a permanent solution?
it is not permanent.
Bartosz Matejkowski i have gaps in the font is mock up a good solution ? how much does this last ? is bonding a better solution ?
@@dreamhigh5250 This is only for testing. Later each of those teeth will need crowns.
وووووووااااااوووو ❤❤❤❤❤
Que poco criterio.ahora ay abridores.de boca.para poder trabajar mejor..digo....
Wtf that’s wak
What is it?boding
+Resad Isa What do you mean?
Bartosz Matejkowski aycriling material is being
+Resad Isa I am not sure what you mean, but I used BIS-Acrylic crown and bridge temporary material - I hope that this is what you want to know. Ask if you want to know something more. Regards.
Bartosz Matejkowski Thank you
+Bartosz Matejkowski hi i have question regarding this video, is that permanent acrylic or temporary ?