Blum Aventos HK by www.doorsandfittings.co.uk
HTML-код
- Опубликовано: 10 май 2011
- Blum Lift systems in wall cabinets provide better access to cabinet interiors because fronts open upwards. The Aventos lift system will win you over with its extreme ease-of-use: Lift systems are easy to open and can be stopped in any desired position. Blumotion provides silent and effortless closing action. Other advantages of Aventos lift system fittings include: high stability, an elegant design and high durability.
www.doorsandfittings.co.uk Хобби
Thank you. This worked for me when my builder couldn't be arsed to sort these out.
Muito show sofisticação au máximo....tudo que é bom é facil instalar
That really helped! Thanks
Perfeito, só BLUM
I did buy these and if you do not have the predrilled holes like this lucky demonstrator does and worse yet if you have a face frame on your cabinet then I say...good luck. I am pretty intuitive which is why I figured it out at all but it took me about 8 hours to do what he does in 3 minutes and 12 seconds. The instructions would leave an engineer scratching his head, they are pretty close to useless. I was, after much interpreting, able to figure out where to drill the holes but my gosh it was not easy!
Moanna Leesa sorry I'm late but if you contact your Blum dealer you can buy the correct jigs so following the instructions with the jig you can fit your hinges in minutes
Yes I am experiencing some confusion around this
Very good fitting
Thank god for this video
Good work
Absolute genius! Where can I buy them? What do they weigh? What is the cost? What load can they lift on cabinet door? I need some for my RV.
Good job
nice silent movie on how to use a drill , but it didn't help me with the template issues I am having since they didn't come in the box
how do you remove the panel/cabinet door with this hinge?
Yeah, I had to adjust my speaker volume, and realize that it is a silent movie.
Please indicate the measuremnts distance between the hinges and the partition
👌
What tip did you use to tighten the screw that allowed the shelf to stay up (1 minute 50 seconds into the video)? I can't get any philips screwdriver to work. Thank you.
You do know that this video was made 10 years ago right?
Use a Pozidrive PZ.1 tip or bit.
Nice sir ji 👍
Super
Nice
Can this be used for murphy beds?
Where can I buy this hinges
C est bien mais les dimensions c est au pif ???. Merci quand même mais je dois encore chercher .......😢
Boa tarde aonde eu consigo essa peça
The hinge and slide of BAIFEIBU are also good. Please get in tough with me if you need.
What type of wood used in this cabnit
Laminate covered particle board.
The crucial and most difficult step at 1:50 is not clearly shown and not explained at all. Do you really need to only adjust the left hinge? Exactly what tool is he using and how does it engage? Does it have to be a power tool?
I figured it out. You need the right size pozi tool from Blum, inserted at the correct angle. Power helps because one needs to make many turns to have any effect - by hand it first looks as though nothing is happening, quite unlike the other adjustment screws. In my case I needed to make 100s of turns.
Berapa harga produk itu , dan apa diindonesia sudah ada
Good
good
cerpaendar saravanan Chennai
Y las medidas???
This Blum product is too time consuming, need two hands to fit the Main hinge! no drilling specifications! No Height restrainer! I and the instructions....Well....you need a degree to understand them! I found a better one and much easier to fit with the Hafele Free Flap system! absolutely brilliant :)
I am interior desing
Prezzi da: £ 62,50. Troppo!
khalid Rana je
Supar
I am carpnttar
valo
I agree… utter horse ****
Nice