GET MORE BRAP!! HOW TO PORT A Kawasaki 650 jetski cylinder. x2 sx ts sc part 1 UNLOCK HORSE POWER!!

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 47

  • @michaelsharpe3500
    @michaelsharpe3500 7 месяцев назад +1

    Thanks for this, makes me more confident about tackling the work myself.

  • @leviashley687
    @leviashley687 3 года назад +1

    You kick butt, I love the 650 & the 750 stuff , I'm a new hobbbiest and I learned a lot watching you. By the way I just put my 750 head on that you did for me and it rocks thanks so much.

  • @toast47624
    @toast47624 4 года назад +1

    I own some CC specialty tooling too. I look at all the tooling you have and see thousands of dollars.

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад

      It adds up quickly! Check out my porting hand piece video
      ruclips.net/video/A7sY-tL9d44/видео.html

  • @Jdoubleu192
    @Jdoubleu192 2 года назад

    Lovely work. Where can I get some templates for a 650 and 750 motor. Daily watch now 👍🏻

  • @c-los4630
    @c-los4630 2 года назад

    Hello Mark, great video. I just followed your instructions on porting, did the same thing to my X2. Just need to know how do I set up my
    carb? Thnks

  • @matthewpatterson6076
    @matthewpatterson6076 4 года назад

    You are the man! Do you offer these templates for the 550 piston port motor?

  • @rockkmonster
    @rockkmonster 4 года назад

    Thanks for sharing your knowledge!

  • @kehoemark
    @kehoemark 3 года назад

    Love the videos, do you have any experience porting the seadoo 657? Thanks.

  • @kimlopresti4913
    @kimlopresti4913 4 года назад

    great videos! wondering if you are going to do a porting video on kawi 750 or is it same as 650?

  • @prtyof4156
    @prtyof4156 4 года назад

    Have you ever milled the bottom of the 650 case to help sealing or alter Port timing

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад +1

      Yes all the time. I will be showing this in the Case porting video that wee be out soon

  • @tropicoairconditioningpsc9053
    @tropicoairconditioningpsc9053 4 года назад +1

    I am about to mount a 750 low pin motor, I bought it in pieces I think that the block or cylinder is not ported. It could cost the job of porting the cylinder and the crams.

  • @grnwtr4life
    @grnwtr4life 4 года назад

    Are you going to do a video on how to port and polish a 550 reed head? Or mind telling me how to do so?

  • @Greg4bmx
    @Greg4bmx 4 года назад +1

    Your videos are sweet! Where's your ski?

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад

      I will be doing a Complete Freestyle Build series soon on a new ski I will be building for myself. Unfortunately I'm normally way to busy building and repairing Customers Skis to have extra time for my own. I have a Carbon Fiber Superjet I build 14 years ago and I've owned tons of skis but almost every time I build something for myself I have a customer that comes in buys it.

    • @Greg4bmx
      @Greg4bmx 4 года назад +1

      @@EricksonMachinePerformance I understand that! You definitely know what you're doing so I'd want a ski from someone like yourself! Keep up the great work! I look forward to your videos!

  • @powerrangjer2001
    @powerrangjer2001 4 года назад

    how to know the degree flow from boost window or port window ?

  • @chrisbrennan2622
    @chrisbrennan2622 4 года назад

    I have a sx 650 is it possible to back flip a sx650 if so what do I need I have x2 trim top loder in tack and West cost ride plate and skat track prop with standard engine

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад

      Flatwater or in the surf? In the surf maybe with foothold and a big pair of ⚾️⚾️. Flatwater NO

    • @chrisbrennan2622
      @chrisbrennan2622 4 года назад

      @@EricksonMachinePerformance in the sea I tried to do it going in middle of 2 big skis I got it just over half way round it lant on top of me

  • @liamfanning_75
    @liamfanning_75 4 года назад

    do you have a 750 template? is it the same?

  • @xterminatorarsenaltackle905
    @xterminatorarsenaltackle905 4 года назад

    Do y'all flash the ECU to accept mods,and where you located?

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад

      I am in Nj. It depends on the ski. But in general Not with a 2 stroke in less you're going to an aftermarket cdi

  • @brycemontgomery1785
    @brycemontgomery1785 4 месяца назад

    What mph do you get out of this cylinder

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 месяца назад

      That's a really open ended question. Every hulls is different. And props have alot to do with it. You gain alot of extra power with porting

  • @brandonpeeples7319
    @brandonpeeples7319 4 года назад

    Do u have porting templates for the Yamaha venture 1100? Thanks

  • @yacoucci
    @yacoucci 2 года назад

    I would like to order a set of your templates how do I go about this?

  • @keithmoore1354
    @keithmoore1354 4 года назад

    nice video

  •  4 года назад

    Muy bueno 👍🏻

  • @Mrcoolnerfstuff
    @Mrcoolnerfstuff 4 года назад

    is part 2 still on the way?

    • @EricksonMachinePerformance
      @EricksonMachinePerformance  4 года назад

      Yes. It's filmed but with Corona we got super backed up with work so I haven't had time to edit videos I have 5 or 6 videos that are filmed at the moment that I just need to finish editing

  • @jeffbryner5355
    @jeffbryner5355 4 года назад

    Ok i need my b1 blaster 760 to fun like a b1 with a 1100/1200 lol can we make that happen? Lol