Why THIS is the Most Expensive Speedcube ($100+)
HTML-код
- Опубликовано: 3 ноя 2022
- The most expensive speedcube... and it might not be what you expect
Join this channel to get access to perks:
/ @cubemasteryt
Watch my livestreams here!: / cubemastertwitch
Sponsored by TheCubicle: www.thecubicle.com/
Use code "cm" for 5% off your order! Кино
I would say lol but I do feel bad for all the fast sq-1’ers that have to go through this
I wonder how much the thin part on the bottom of the edges and corners matter. If they’re not that important, it would probably be pretty easy to cut it off then 3d print a part to go inside the circle on the core piece, and that would make it much stronger.
I have the exact same problem with gan skewb and its corners. I have 3 gan skewbs and one more still in its packaging in case my main one breaks :D
I’ve had my MGC Square-1 for about a year now, aaaannnd right off the first 3 months of using it, 2 corners broke (not even bent they literally broke), and the screw doesn’t work. While the cube does still feel great, the number of lockups I get (especially during cube shape) are one too many. It’s gotten so bad, that I’ve really considered switching to my modded Yuxin Little Magic, which isn’t too much worse than the MGC imo.
I have broken about 3-4 of the core pieces and I have to tighten it quite a bit so I dont lock up and have pieces pop out a little
I’m not even that fast at squan (sub 30) but one of my mgc edges just broke. Hope superglue can temporarily fix it :(
Got my MGC replaced so now I have a PVC Exoshield Cosmic MGC Sq-1 that I made maglev. Still my main after 7 months of it not breaking.
Great video!
I love square 1 and this is why it's not my main event
Can a fully modded and magnet added yuxin little magic square 1 be better than the mgc square 1? Because volt square 1 breaks often and so as mgc. So is yuxin good than mgc after modding?
My MGC has broken way too much up to the point that I’d get a major lockup every other solve, so I modded my Yuxin Little Magic, and it’s not all that bad compared to the MGC (though you do have to tighten it a little more)
Had mine for 11 months, and idk what my issue is, but I disassembled it and then reassembled it.. and now the tensions on the U and D layers are off. I use bumblebee yellow top, and the yellow (U) layer is fine but the black (D) layer is super loose. If I tension it sometimes the losseness switches sides to yellow. If I pull apart the squan from the sides, the gap between the equator is different on the red and orange sides too. If I pull on the middle layer, the red side has a large gap whereas the orange is super tight. I’m just confused :(
My MGC also has uneven U and D layer tensions. Can't figure out why!
@@solver5k I’ve now figured out that the screw was bent. No clue how I did it!
@@novaaAU Glad you figured it out!
have you only Made 2 naglev sq-1 or do you nake many
Do you think there is any square ones out there that don't break as much? I'm looking to get a good square one but I don't want mine to break and then buy a new one.
The mgc is the best and most durable square one I believe
@@seankim2916 best but nowhere close to the most durable, that's probably the ylm
how many square 1s do you have??
haha my mgc squan probably didn't break cos i don't practice square 1 at all loll 🙃
i have one mgc and after a year nothing has broken
it is just luck
was about to buy a mgc sq1 but i think i'll pass this puzzle
Yeah same happened to me
i don't even turn fast and I have broken 2 pieces in my core in 2 months lmao (cbf replacing tho)
When you realize sq1 is not always cube:👁👄👁
Did you know gan 11 12(From jperm) is 147 dollars
So we are not talking about the gan 11 12 13?
Cube master what is your main 3×3
I think Celeritas Meilong M but it has probably changed by now…
my main is a supernova moyu weilong wrm 2021 (non maglev)
@@superflipcuber2_7296 Cool! Just in case u r interested in knowing…
My mains:
2x2: YJ MGC2 Elite
3x3: Cuber’s Home MoYu WeiLong WR M 2021 MagLev
3x3 OH: YJ ZhiLong Mini
Pyraminx: GAN Pyraminx Enhanced UV Coated
Skewb: GAN Skewb M
And those r all of the events I practice…
Btw if u wanna see all of Cube Master’s mains or his whole cube collection, check out his collection video! Just search of “Cube master cube collection” and it should appear.
Nice title
still using mgc with broken core avging low 10 lol. After that I thought it will be unusable but its doing pretty fine and isnt that problematic
isnt the title supposed to be "Why *this Square-1* is the Most Expensive Speedcube" ?
Yeah, i was about to comment that
hey can i still send a squan ao5 for you to send a written critique
I've been cubing for 4 years and never broken a piece... how hard you y'all turning??
Oh. So that’s why my mgc sucks lmfao
bro snuck in the gan sq 1 3:53
I can make a frankenstein cube worth way more
Im so early lol
wow im early
Ok
FIRST
No
8th