omg totally awesome, you just saved me $680.00 my local shop wanted to charge me because he couldn't read my mileage to do my inspection. I told him "no way I'm paying that..." he tried to convinced me but when I said I was going on-line to see what I could learn he totally shut-up and stopped talking. Now know why - ten cents worth of solder and some time to remove the cluster - Are there no honest repair man left who tell the truth?
Thank you so much! You are the man! I followed your directions and now my wife thinks I'm a hero! Yeah. Thanks to you. Really appreciate it. It took me exactly 1 hr. After many years of working and not working, now It works constantly! Can't thank you enough. Cheers!
Thank you so much!! I've been fighting this issue with my truck for a long time! I was told it needed a new odometer and it would be $250 plus a programming fee (Where they program it to match your mileage). You just saved me close to $300! Thanks man! God Bless!
Fantastic! Taking the dash apart is the most difficult part of the whole procedure. Would have been back together in 45 minutes, except I had to locate a replacement bulb for an indicator. Doubled the time just driving to the autoparts store and identifying the bulb.
Worked just like shown in video, getting cluster out was not a hard as I thought it would be, will cluster was out after the fix I turned cluster over and removed front clean plastic and cleaned out all the dust unit is replaced in truck working great and looks like a new cluster with dust removed and clean clear cover.
your vid helped me, thanks! mine is 99 model f150... the first and last joints were definitely cracked, but also three others were suspicious, so re-soldered them and a few others on the board that looked iffy... everything works now and i can go and pass emissions... who knew they needed to be able to read the odometer to even begin to do my emissions test, i thought i was just gonna sweep the issue under the rug, but oh well, was easy enough. big government bastards.
Do you know what bulbs go in this circuit board? I had this same issue and fixed it, but wanted to replace the lights while i had it apart. Can't find the lights/sockets anywhere.
do you know what the issue is with a 2004 F53 rv chassis, speedo only works at higher speeds, about 60-80 km/h and higher? I'm thinking it's a bad speedo motor but it could be a solder joint as well. have you run into this before? Thanks
My odometer doesn't work most of the time and every now and then when I drive for a long distance it will start working...does this sound like a soldering issue also?
My speedometer says I'm doing 70 MPH as soon as I take off and it stays there! I've also had all kinds of problems with my interior dome light staying on for a very long (20 minutes) time as well as my door locks not locking when I put it in drive (like they use to). Also my door ajar light now stays on! I have an 2003 F250 super duty!
what was the issue you fixed? my 2000 f150 milage will go blank then slowly come back on? it still records while off but bugs me..will this fix that thanks
Thank You. I took the cluster out, and following your direction to locate the problem area, Instead of soldering it, I used some silver epoxy I had that is used to fix rear windshield defroster elements. Worked great. You saved me about $600 dollars compared to a shop.
Plz help me, my ford focus 07 showing acceleration reduced and down right side bulb on some times its off automatically also showing engine sydtem fault why like this happening wht do to for this plz help..
+nubas nubas Give me a email your email adress and i will sent to you some pictures with how to fix your car. A had the same problem like you with my car Ford Focus 2008 1.6TDCI. TX
Thanks for the video. I have a 2000 mustang. I had this problem of my odometer display blinking out.I did this but afterwards my trip/reset button stopped working. When I push the button the trip miles does not appear (it was working prior to the repair). All it shows is my car mileage. I took the face off the cluster and removed the reset knob and pushed with my finger and it still did not bring up the trip miles. Have any suggestions on the problem?
well it's good to see everyone has there's go on go off drives me crazy getting ready to replace check engine light in my 2000 failed smog test for not working
It was not cluster its the failure of fuse box system need check the security system of fusebox now its fixed in my ford 07 but pretty expencive 😰1000 dhs
omg totally awesome, you just saved me $680.00 my local shop wanted to charge me because he couldn't read my mileage to do my inspection. I told him "no way I'm paying that..." he tried to convinced me but when I said I was going on-line to see what I could learn he totally shut-up and stopped talking. Now know why - ten cents worth of solder and some time to remove the cluster - Are there no honest repair man left who tell the truth?
This fix saved me $650 from the dealership. I already had everything to fix it. Thanks!!!!!!
Thank you so much! You are the man! I followed your directions and now my wife thinks I'm a hero! Yeah. Thanks to you. Really appreciate it. It took me exactly 1 hr. After many years of working and not working, now It works constantly! Can't thank you enough. Cheers!
Fixed mine today. Thank you so much. Auto shop wanted $1100 to install new and reprogram. I just spent $23 on a soddering gun. Awesome!!!
thanks to you i did it in 30min from beggining to end. thanks a million.
Thank you so much!! I've been fighting this issue with my truck for a long time! I was told it needed a new odometer and it would be $250 plus a programming fee (Where they program it to match your mileage). You just saved me close to $300! Thanks man! God Bless!
Thanks for your video,I did what you said and everything works perfectly
Fantastic! Taking the dash apart is the most difficult part of the whole procedure. Would have been back together in 45 minutes, except I had to locate a replacement bulb for an indicator. Doubled the time just driving to the autoparts store and identifying the bulb.
I am back in business. Under two hour fix! Thanks again!!
Worked just like shown in video, getting cluster out was not a hard as I thought it would be, will cluster was out after the fix I turned cluster over and removed front clean plastic and cleaned out all the dust unit is replaced in truck working great and looks like a new cluster with dust removed and clean clear cover.
your vid helped me, thanks! mine is 99 model f150... the first and last joints were definitely cracked, but also three others were suspicious, so re-soldered them and a few others on the board that looked iffy... everything works now and i can go and pass emissions... who knew they needed to be able to read the odometer to even begin to do my emissions test, i thought i was just gonna sweep the issue under the rug, but oh well, was easy enough. big government bastards.
Thanks for your excellent and thought provoking videos GBob! DrD
Thank you for this video it helped me to fix my truck I appreciate it
Your amazing!!! Thank you so much. I will start this tomorrow.
THANKS A MILLION this was extremely helpful and thanks for making the video i
Thank you for making this video.
Thanks for the video. Worked great.
thanks a lot was able to accomplish the problem it works.
Worked perfectly. Thank you.
Nice one bubbles. Bit of a step up from the shopping carts!
Do you know what bulbs go in this circuit board? I had this same issue and fixed it, but wanted to replace the lights while i had it apart. Can't find the lights/sockets anywhere.
Thanks mate. I'll let you know if this works. Cheers for sharing.
do you know what the issue is with a 2004 F53 rv chassis, speedo only works at higher speeds, about 60-80 km/h and higher? I'm thinking it's a bad speedo motor but it could be a solder joint as well. have you run into this before? Thanks
My odometer doesn't work most of the time and every now and then when I drive for a long distance it will start working...does this sound like a soldering issue also?
Do you know what size bulbs are in this Gage I have same one and need to replace the lights?
My speedometer says I'm doing 70 MPH as soon as I take off and it stays there! I've also had all kinds of problems with my interior dome light staying on for a very long (20 minutes) time as well as my door locks not locking when I put it in drive (like they use to). Also my door ajar light now stays on! I have an 2003 F250 super duty!
Thank you.
Do you know if this will work on the super duty too?
worked perfect, and thanks
what was the issue you fixed? my 2000 f150 milage will go blank then slowly come back on? it still records while off but bugs me..will this fix that thanks
thanks
do u know how to repair a 2004 ford taurus odometer display?
I've had that problem for years. Will this effect the odometer reading after soldering it? thanks
+SuperJamster1 No. The memory is in the computer.
Thank You. I took the cluster out, and following your direction to locate the problem area, Instead of soldering it, I used some silver epoxy I had that is used to fix rear windshield defroster elements. Worked great. You saved me about $600 dollars compared to a shop.
Thanks A great help
Thanks for the vid!
Plz help me, my ford focus 07 showing acceleration reduced and down right side bulb on some times its off automatically also showing engine sydtem fault why like this happening wht do to for this plz help..
+nubas nubas Give me a email your email adress and i will sent to you some pictures with how to fix your car.
A had the same problem like you with my car Ford Focus 2008 1.6TDCI. TX
+Alin Serban alin.helinick@gmail.com
Thanks for the video. I have a 2000 mustang. I had this problem of my odometer display blinking out.I did this but afterwards my trip/reset button stopped working. When I push the button the trip miles does not appear (it was working prior to the repair). All it shows is my car mileage. I took the face off the cluster and removed the reset knob and pushed with my finger and it still did not bring up the trip miles. Have any suggestions on the problem?
+Ms PM You lost the rubber plunger that goes behind the od shaft.
What about an odometer that only a displays "error"
well it's good to see everyone has there's go on go off drives me crazy getting ready to replace check engine light in my 2000 failed smog test for not working
This soldering technique worked on my 2006 f150 also. Poor quality control at ford's supplier.
ljr19183 no, it’s something that can happen to anything.
Yes I TOOK The Cluster All A Part AND Couldn't FINED A Crack On The board.on A 2007 van.
Besides the odometer, my oil pressure and gas gauge come and go as they please.
Only problem, it still doesn't work.
I have the same problem it don't work.Icouldnt find a Crack on the board to solder.
Repair the mileage too .. LOL
would be nice if it had sound
It was not cluster its the failure of fuse box system need check the security system of fusebox now its fixed in my ford 07 but pretty expencive 😰1000 dhs