Can you set it up for just 1 button pressed to turn on or does it have to be 5 . I have a V4 on my Cube and i just to press and hold ( - )button to activate 45kmph. Have you any issue with using controller x.
Our tuning modules for the PW-X3 work without any problems. A VOLspeed V3.1 does not exist either. You may have been recommended a tuning module from another manufacturer. Dealers sometimes recommend modules that you can only switch on and off, as there are fewer queries due to the limited range of functions, which means less work. Our modules generally have many setting options, e.g. personal code, dynamic mode, precisely adjustable limit, adjustable wheel circumference. You should therefore check exactly which functions are important to you and then decide on the right module.
So far, we have not been able to provoke a tampering error with the VOLspeed. No customer has caused one either. Therefore, we cannot say what the behaviour would be if such an error were to actually occur.
Hello, we received the Interface X just a few days ago for testing. The tuning also works with it. However, without a display, there is no feedback about the settings. Therefore, we want to test different ANT+ LEV compatible displays and also implement an additional possibility of visualisation, e.g. via the battery LEDs on the Interface X. I think that we will have a good solution in about 2 weeks.
Brought to a bike shop for a mechanic to install. Nope. Only licensed for Bosch motors. And according to a Yamaha E-motor Rep., Doing this on your own, will void warranty of the motor. Of course, that's already been voided, after I accidently submerged the motor in a creek that appeared...shallow. So, I'm stuck with a dead motor.
![Kodak Black - Sharp Vibes [Official Music Video]](http://i.ytimg.com/vi/oEV0OoLJeIs/mqdefault.jpg)
this does not fit nicely on pw-x3 on gas-gas ebike, motor cover is different and no gap to put module in. had to use tape to close it.
Hey mate, how do you like the gas gas with the Yamaha pwx3 motor?
Can you set it up for just 1 button pressed to turn on or does it have to be 5 .
I have a V4 on my Cube and i just to press and hold ( - )button to activate 45kmph.
Have you any issue with using controller x.
Ist das tuning nachweisbar zwecks Garantie? Also natürlich wenn das Modul wieder ausgebaut ist
So far, we have no evidence that the module would still be detectable after removal.
Hi i have a yamaha pwx3 but they advice me to take volspeed 3.1 which is more expensive, but 3.0 works as well right?
Our tuning modules for the PW-X3 work without any problems. A VOLspeed V3.1 does not exist either. You may have been recommended a tuning module from another manufacturer. Dealers sometimes recommend modules that you can only switch on and off, as there are fewer queries due to the limited range of functions, which means less work. Our modules generally have many setting options, e.g. personal code, dynamic mode, precisely adjustable limit, adjustable wheel circumference. You should therefore check exactly which functions are important to you and then decide on the right module.
Does the Yamaha motor permanently lock out after 3 tuning errors the same as Bosch does?
So far, we have not been able to provoke a tampering error with the VOLspeed. No customer has caused one either. Therefore, we cannot say what the behaviour would be if such an error were to actually occur.
Can you switch off the tune and lock it to code while cycling?
Yes, you can also switch off the tuning while riding. If a personal code has been set, this must be entered again to activate it.
Does this fit Yamaha PW-S2 completely?
Yes, this tuning works with the PW-S2 as well as with the PW-X3.
When will it be compatible with Interface X on the haibikes. ?
Hello, we received the Interface X just a few days ago for testing. The tuning also works with it. However, without a display, there is no feedback about the settings. Therefore, we want to test different ANT+ LEV compatible displays and also implement an additional possibility of visualisation, e.g. via the battery LEDs on the Interface X. I think that we will have a good solution in about 2 weeks.
I have the haibike nduro 7 with the interface x, will this work on my bike?
Do you have to activate it everytime you turn on the bike
Yes
Brought to a bike shop for a mechanic to install. Nope. Only licensed for Bosch motors. And according to a Yamaha E-motor Rep., Doing this on your own, will void warranty of the motor. Of course, that's already been voided, after I accidently submerged the motor in a creek that appeared...shallow. So, I'm stuck with a dead motor.
illegal no way in german thumbs down bb and reported
Snitch!
Witzfigur. Anzeigenhauptmeister du.
pig
Grass