Привет, в данном видео я снимал на GoPro Hero9 в формате 4К 30fps. На дороне тоже в 4К 30fps, но там ещё есть в настройках какое качество, я выбираю найлучшие, и в цветокорекции выставляю режим яркий, тогда все в глядит более насыщенно.
I also thought about it. there are similar zips already ready with an electric motor, but they are heavier and then the quadcopter will not be able to lift a lot of weight
@@TEHNOGENERATOR One motor. For all the legs. On one leg to keep the description easy. Two strings like a puppeteer for one leg. An outer string to open. An inner string to close. Loops along the leg to hold the string on the outer surface for opening. Loops along the leg to hold the string on the inner surface for closing. The strings are then attached to a thread bobbin on the motor spindle. The motor is attached to the drone with some tape. This is where the winch mechanism acts as a directional open = motor pulls the bobbin around and then stops power. The digits will be open. closed = motor pulls the bobbin around and then stops power. The digits will be closed. A sketch will help plan this out a lot better.. It's basically like a puppet.
I have a built-in reset system on this quadcopter. I thought I could make it so that the paw worked from the stock of the reset system. so that I just press on the remote to release the load and the paw will open, and when the lock is pressed, the release systems of the paw will close.
@@TEHNOGENERATORподскажите пожалуйста, не сталкивались на дроне, что после обновления приложения на телефоне, дрон больше не видит модуль сброса(мегафона) от слова совсем? Как будто нет этого модуля больше на дроне. Пиктограммы в приложении тоже больше нету, спасибо
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
привет. в каком формате снимаешь видео? на каких настройках?? дюже четкое видео на исходе получается
Привет, в данном видео я снимал на GoPro Hero9 в формате 4К 30fps.
На дороне тоже в 4К 30fps, но там ещё есть в настройках какое качество, я выбираю найлучшие, и в цветокорекции выставляю режим яркий, тогда все в глядит более насыщенно.
Tape rope loops on top for the grabber to attach. A motorised open and close so to grab harder.
I also thought about it. there are similar zips already ready with an electric motor, but they are heavier and then the quadcopter will not be able to lift a lot of weight
How do you think? what exactly is the best way to do this?
@@TEHNOGENERATOR One motor. For all the legs. On one leg to keep the description easy. Two strings like a puppeteer for one leg. An outer string to open. An inner string to close. Loops along the leg to hold the string on the outer surface for opening. Loops along the leg to hold the string on the inner surface for closing. The strings are then attached to a thread bobbin on the motor spindle. The motor is attached to the drone with some tape. This is where the winch mechanism acts as a directional open = motor pulls the bobbin around and then stops power. The digits will be open. closed = motor pulls the bobbin around and then stops power. The digits will be closed. A sketch will help plan this out a lot better.. It's basically like a puppet.
I have a built-in reset system on this quadcopter. I thought I could make it so that the paw worked from the stock of the reset system. so that I just press on the remote to release the load and the paw will open, and when the lock is pressed, the release systems of the paw will close.
@@TEHNOGENERATORподскажите пожалуйста, не сталкивались на дроне, что после обновления приложения на телефоне, дрон больше не видит модуль сброса(мегафона) от слова совсем? Как будто нет этого модуля больше на дроне. Пиктограммы в приложении тоже больше нету, спасибо