Hey Mark! Thanks for this video. I’m the one that is posting in The Make with the Scroll Saw pattern for the Cathedral Clock that I’m making. The pattern I have has been a pain but your node videos, joining open vectors, all have been extremely helpful. However this video has been the best for me. The pattern when imported has thousands of nodes for each piece. It’s insane. This video helped clean it all up, reducing cut time, and way smoother cuts. I really appreciate the help and your videos. JB
Thank you for making and sharing these very, very, helpful videos. Without generous people like you, us "newbies" at CNC would find life a lot trickier. I for one am very grateful indeed.
Thank you! I figure we're all in this thing together, so I'm just trying to help folks keep from making the mistakes I've made, and highlight the tips and techniques Vectric had buried in their longer tutorials. If it helps folks out, it's worth it.
Thank you for the great video! This is hands down one of the most important factors in CNC machining...having unnecessary node points leading to longer machining times and often more wear on the CNC's mechanical components.
Thanks very much, Mitch! I do appreciate the comment. If you're thinking about getting into CNC, the time to start learning the software is yesterday. There's a link in the description box to the Vectric website. You can download a free trial edition of VCarve Pro or Aspire and learn to use it. It's a fully functioning version of the software, with one exception - it won't let you save g-code until you buy a license. Any drawings/patterns/files you create in the trial version can be used in a fully licensed version ONLY if the licensed version is installed on the same computer the trial version was installed on. (Hope that made sense.) It's worth looking into - if for no other reason than to see if you like that software or not.
Great instructional video! I fit the curve to the vectors I had in a eps imported logo and discovered not all of the vectors fit a new curve to the existing vector. After looking at the nodes in the original eps, I discovered that there was many nodes basically on top of each other. Thus the fit curve to vector didn't work. So I deleted the nodes that were on top of each other or really close to each other. Then I did the "Fit curve to Vector" and it worked. Thanks again!
Change the direction? Like make a profile toolpath run in the opposite direction? Just change from Climb cut to Conventional, or Conventional to Climb in the toolpath and recalculate it.
Thanks! That was enlightening. Learned a new tool in Aspire! Very helpful for me today. I came here trying to figure out if I can delete more than one node at a time. I know I can select multiple, but when I click delete node with several selected nothing happens.
Sometimes the vectors can only be cleaned up so much. This is especially true if it's a complex shape or pattern. Try previewing Bezier curves and circular arcs to see which works the best for you. Then again, some vectors will still have a lot of points. That's okay. Go ahead and calculate the toolpath and preview it. If it looks good, it is good.
@@MarkLindsayCNC Thanks for the reply. I ended up "cutting" each vector into smaller components then using "Fit curves" and rejoining. Something about this particular set of drawings caused the lines to be more nodes than I have ever seen. 1000's per inch. Possibly, my computer was not powerful enough to handle so much info all at once.
@@1metalmomma That's actually very common with files that were originally drawn up in a CAD program like AutoCAD. By default, they tend to make curves by connecting a ton of short straight line segments together. Glad you got it fixed!
Hello very nice video I make couple tests and it’s make a different:) but just to clarify what’s better for Mach 3 g-code raining machine convert lines to circular Arcs or Bézier curves ? I see on your video that when you choose bezier courses you achieve less points that circular arcs. I read couple of forums, people mention that curves are the way to go when coming to machining ? Thanks for help
That's 100% your choice. If you'd rather use Arcs, then that's fine. I've never had an issue with Bezier curves, but I understand that some people have.
great vid !!! I'm a beginner and I'm struggling with problems that are easy for you. Would you be able to do a video or explain in the comments the basic rules for vector drawing, because in drawing I have problems with intersection of vectors and loops, I cant generate tool-path. What are the basic rules for drawing vectors. Tenx
The number one rule in drawing vectors is to remember that they need to be joined together to create a single, closed vector. I'll get into it further in another video later on. Thanks for watching!
I always copy and past the design on top of the original changing the copy to a different colour then apply the fit curves to vectors. Then compare the original to the copy as they can differ.
That's a good habit to get into if it's critical that the copy matches the original. If it's not all that important, I don't bother. Thanks for checking it out!
Thanks Mark! You just cut my cutting time in half!! Huge!! Good Man!
Hey Mark! Thanks for this video. I’m the one that is posting in The Make with the Scroll Saw pattern for the Cathedral Clock that I’m making. The pattern I have has been a pain but your node videos, joining open vectors, all have been extremely helpful. However this video has been the best for me. The pattern when imported has thousands of nodes for each piece. It’s insane. This video helped clean it all up, reducing cut time, and way smoother cuts. I really appreciate the help and your videos. JB
Thank you for making and sharing these very, very, helpful videos. Without generous people like you, us "newbies" at CNC would find life a lot trickier. I for one am very grateful indeed.
thank you for this video. It helped me a lot and you explained it very well. Nice greetings from Germany. Kay
Mark thank you so much I set this video for watching constantly as I am working on making my own vectors and don't need a bajillion vectors.
you got hve a like from me searching for or needing this for a year now
Mark, those are great tips. I don't own one but you're helping a lot of folks out with this info...high five dude!!
Thank you! I figure we're all in this thing together, so I'm just trying to help folks keep from making the mistakes I've made, and highlight the tips and techniques Vectric had buried in their longer tutorials. If it helps folks out, it's worth it.
Thank you for the great video! This is hands down one of the most important factors in CNC machining...having unnecessary node points leading to longer machining times and often more wear on the CNC's mechanical components.
Thanks very much! You also get a much smoother cut, I find.
nice! I don't own a CNC yet but I think if I watch enough of your videos I will be better off when that day comes. Great tips & tricks Mark!
Thanks very much, Mitch! I do appreciate the comment.
If you're thinking about getting into CNC, the time to start learning the software is yesterday. There's a link in the description box to the Vectric website. You can download a free trial edition of VCarve Pro or Aspire and learn to use it. It's a fully functioning version of the software, with one exception - it won't let you save g-code until you buy a license. Any drawings/patterns/files you create in the trial version can be used in a fully licensed version ONLY if the licensed version is installed on the same computer the trial version was installed on. (Hope that made sense.) It's worth looking into - if for no other reason than to see if you like that software or not.
This really helped! Thanks Mark!
Thank you! This is an excellent tip and easy to follow video
This is priceless info! Thanks Mark!!!
Really helpful and useful information. Thank you so much
Great instructional video! I fit the curve to the vectors I had in a eps imported logo and discovered not all of the vectors fit a new curve to the existing vector. After looking at the nodes in the original eps, I discovered that there was many nodes basically on top of each other. Thus the fit curve to vector didn't work. So I deleted the nodes that were on top of each other or really close to each other. Then I did the "Fit curve to Vector" and it worked. Thanks again!
Glad it worked for you! Thanks for the heads up on the stacked nodes in the EPS file. I'll have to remember to watch out for that.
Very useful Mark!
Great information and excellent explanation. It is really going to help me on some projects I am about to start. Enjoyed watching.
Thank you, Russell!
Great little resource, Mark. Thanks! I've been looking for this tool :)
Thank you! I do appreciate it. Hope it helps you out!
thak you a lot /Just today ' asked my self how i can make 'it on my work and i find the best answer!!!!
Thanks for the light!
Exactly the video I needed. Thank you!
I knew there had to be some tool to fix that issue. Thank you.
Another great video! Thanks for sharing Mark!
Hey Mark can you change the directing of the calculated tool path on vcarve
Change the direction? Like make a profile toolpath run in the opposite direction? Just change from Climb cut to Conventional, or Conventional to Climb in the toolpath and recalculate it.
I wish I could press the thumbs up button more than once!
Great video Mark.
Hope it helps! Thanks for watching!
Thanks! That was enlightening. Learned a new tool in Aspire! Very helpful for me today. I came here trying to figure out if I can delete more than one node at a time. I know I can select multiple, but when I click delete node with several selected nothing happens.
Thank you! I'm glad to hear it helped!
Very good explained!! superr Chanel
Thank you!
You are amazing!
Great video! but...sometimes not all vectors will clean up, even after several setting changes in "Fit curves" mode. can you help with that?
Sometimes the vectors can only be cleaned up so much. This is especially true if it's a complex shape or pattern. Try previewing Bezier curves and circular arcs to see which works the best for you. Then again, some vectors will still have a lot of points. That's okay. Go ahead and calculate the toolpath and preview it. If it looks good, it is good.
@@MarkLindsayCNC Thanks for the reply. I ended up "cutting" each vector into smaller components then using "Fit curves" and rejoining. Something about this particular set of drawings caused the lines to be more nodes than I have ever seen. 1000's per inch. Possibly, my computer was not powerful enough to handle so much info all at once.
@@1metalmomma That's actually very common with files that were originally drawn up in a CAD program like AutoCAD. By default, they tend to make curves by connecting a ton of short straight line segments together. Glad you got it fixed!
Great Video Mark!
Thank you Lyle!
Thanks Mark for the info
Hello very nice video I make couple tests and it’s make a different:) but just to clarify what’s better for Mach 3 g-code raining machine convert lines to circular Arcs or Bézier curves ?
I see on your video that when you choose bezier courses you achieve less points that circular arcs. I read couple of forums, people mention that curves are the way to go when coming to machining ? Thanks for help
That's 100% your choice. If you'd rather use Arcs, then that's fine. I've never had an issue with Bezier curves, but I understand that some people have.
@@MarkLindsayCNC thank You I will do some tests cuts and compare finishing times
great tip thanks Mark
Thank you very much!!!.
Thank you!
Excellent, thank you!
great vid !!! I'm a beginner and I'm struggling with problems that are easy for you. Would you be able to do a video or explain in the comments the basic rules for vector drawing, because in drawing I have problems with intersection of vectors and loops, I cant generate tool-path. What are the basic rules for drawing vectors.
Tenx
The number one rule in drawing vectors is to remember that they need to be joined together to create a single, closed vector. I'll get into it further in another video later on. Thanks for watching!
life saver!!!
That F***IN helped a lot :-) Thx
Thanks m8, you saved me
That helps a lot !
I always copy and past the design on top of the original changing the copy to a different colour then apply the fit curves to vectors. Then compare the original to the copy as they can differ.
That's a good habit to get into if it's critical that the copy matches the original. If it's not all that important, I don't bother. Thanks for checking it out!
❤❤❤❤❤
Great video mark !