E46 Drift Build Ep15 Spare wheel well delete
HTML-код
- Опубликовано: 10 сен 2024
- cutting out spare wheel well and battery box to relocate to a better place also tidy up the rear bumper so it wont fall off hahaha
link for spoiler - www.ebay.co.uk/...
sponsor of this channel - Team Beard
store.teambeard...
I remember watching these videos when they were 1or 2 old now starting my Own project,good vid
🤘😎 good on you man
I know this video is old, but I have a similar project! you have a great approach to a project like this. Lots of great Ideas! keep it up!
Cheers lad I actually started another thread build/playlist putting a 1jz into it all on this channel 👍🏻
I really need advice on this I have a e46 and I want to cut out the boot for it to slide more is it really worth it and what's roughly the wieght of what's cut out thanks
Having to make the decision to cut mine out on my subaru, great help!
Great to hear it helps dude 🤙😎
What’s the rough dimensions of the steel?
thanks man being trying to figure out that for awhile did you just join the 2 pipes coming out of it?
John G yeah
Hi, thank you for the very informative video, I was thinking of deleting the spare wheel well to fit a big diffuser on my track car and this will be useful;
are you sure you needed to add the bar to the chassis? I don't think the well has any structural functions.
I don’t think so no but it’s up to you how to cut out ur car that’s just the way I did mine 🙂👍🏻
@@SMTMOTORSPORT Thank you for your answer;
It seems to me that the spare wheel well is just a sheet metal bucket hanged at the bottom of the trunk but, considering that some e46 like to destroy that zone of the chassis, a bit of reinforcement is anyway a good idea.
Keep on the good job.
well was wondering whats the black round thing bolted to battery box with pipes??
John G charcoal can 🤙 went in the bin 😂
SMT MOTORSPORT did you delete that can? how can it be done🤔
@@SMTMOTORSPORT like the channel bud. I've done the same on my e46 too! And am doing a few similar things as yourself lol apart from 1jz swap end of things it's way out of my budget these days! But great build by yourself to bud! Anyways can you explain more about the vacuum system that sit along side the battery box in what you did with it when you ran the bmw engine! Cheers
Awesome video helped a bunch! 😃👍
Awesome video man 👍🏼
Hi what thickness sheet metal did you use and was it aluminium?
It’s steel but it’s most likely 1mm or 1.5mm
@@SMTMOTORSPORT I’ve noticed else welll towards the front you go down on the cuts and around, Couldn’t I cut out the whole bit in a circle or is that like part of the floor or structure something?
this may sound stupid but is this road legal i want to do it but not if its illegal for the road
In the uk it’s not illegal just depends where you live 🤷🏻♂️
Like your build a lot! But I have a question, what's the benefit of deleting the spare wheel well? At first I thought you were going to tube chassis the rear.
Extrmfan there's not massive gains, it saves weight, u can fit diffuser better, change exhaust, jack car up on diff easier, I mostly only did it because I wanted to move battery away from corner and I just hated that wheel well 😂
Flat spot for a fuel cell, weight, some cars like the e30 have the tank in the shittiest spot with the drive shaft running between two halves of the tank. If your looking for areo gains this will only hinder aero on most bmws unless you put a diffuser under the car.
One question, how do you avoid not inhaling any welding fumes while you work?
U can buy air feed weld masks most full time welder wear it but I don’t weld often so yea normal mask is fine
I think it would have been cool if you ran a slip down the middle of those tubes seeing and put this slab of metal between the middle
What did you do with the charcoal canister ?
In the bin I think 😂🤷🏻♂️
13:11 do you have to leave that back part of wheelwell in there? or can you make it absolutely flat all around?
U can if u want I just think it keeps strength In that part of chassis
Hello! Quick question, whats the point del. it? Not weight? Is it something about air flow?
Best regards!
Tom Erik Easy to get to diff and shafts if they snap,
What what size of metal did you use to weld in the spare and battery holes? And size welding wire did you use?
Bee Souvannasaeng I think it was 1.5mm sheets I had laying around and my welding wire is 0.6mm
i love the vids mate keep making them thanks
thank you comments always keep me going to make more videos!
How much does the spare wheel well weigh ?
Not sure to be honest
Whats the music called In the background
Great job bro. Did u have any problem with aerodynamics or parachute effect of rear bumper? I mean is it safe for street use also?
No problem at all been way over speed limit and its fine
How are called those yellow bars on the rear end?
Peds those r called jacking points
Hey just found your channel and I love it but what did you do to delete the charcoal canister?
just removed and vent to outside away from exhaust
nice video until I saw those rubber bands on the bumper :-( should've used quick latches instead
Sergi Quin I was going to but this is a budget build and couldn't justify that money as I will bash/rip the bumper off 🙈😂
do you have a picture or video on where and how u relocated your battery ? thanks!
Check out build video 👍🏻 it will be relocated again soon we’ll same place just better mounting
@@SMTMOTORSPORT oh thanks , which build video bro ?
Jason Kong just uploaded it couple days ago also in 5thing I like and don’t like about my e46
@@SMTMOTORSPORT THanks bro !
Can you give some advice on getting into drifting in the uk
In the next video I will ask for questions and all that then make a Q&A video that sound ok ?
Do it has Mot ? If yes how did you get it through??
Yes it has mot friendly 🤫😜
@@SMTMOTORSPORT how did you get it through ? I will start to build at home 2JZ e46 and I was wondering what to do talking about insurance and mot
@@danilobertolo3126 insurance depending where u live! But most motorsport insurance company’s should insure it and for mot you need to go by the book if u want it to pass anywhere I.e have a catalytic converter fitted etc or find a garage that mot modified cars and yeah tip is handy there 😉👍🏻
I use trade insurance as I have a car garage but like above plenty motorsport insurance company’s out there
weldy weld 😂
what welder r u using love the vids and car
its a clark mig welder 151te turbo costs around £330 and its a great tool ...well worth the money!
Link to the ducktail u mounted?😄
just added it for you dude :)