of course you can sir. you can download it. see the link in my video description. i share firmware from 1pixel per segments to 10 pixels per segments. i suggest you watch the video from start to finish. thank you.
05:58 Flash Firmware. D4 should not be connected during flashing (error). if successful. press the reset button or reset power. if the blue led is on then the firmware is already in the esp8266 device. wifi WLED CLOCK RTC will appear. move closer to the esp8266 device, there is a possibility that the esp8266 wifi antenna is emitting a weak signal.
@@AsepRizal hi sir, thankyou for your response. i tried once again, install firmware without led connection with nordmcu wsp8266, it install successfully but not showing on wifi. when i install wled the it work but when i installing your firmware for digital clock it does not show on wifi network. is there any to insert wifi ssid and password in firmware and then install it to nordmcu so it directly connect to our wifi network without manual add this? if it is possible then please revert.....
@@RavinderSingh-k1zin the esp8266 flash download tool application. delete (ERASE) the old firmware. then enter the new firmware. wifi will appear. ruclips.net/user/shortsVdC4Ltev-XU?si=EKe-JJQXd0z8J5ee
@@AsepRizal sir, i have used firmware - WLED300esp32.bin, esp322PX.bin, esp323PX.bin, esp324PX.bin but non of these was worked they install successfully but wifi not showing. i have tried a firmware from old video - ruclips.net/video/kfGs7YVSEp8/видео.html , that is - WLED2PX.bin & wledDATA.spiffs.bin was working fine it shows after installation wled-ap on wifi.
The clock has been made very well. A clock has been made which shows the date and month after 10 seconds.
I accept your suggestions for the next project
ruclips.net/user/shortsBUcr5hd7UXw?si=AYv91vv0zZ_ysNNE
all shown 10 seconds.
ALHAMDULILLAH...di tampi sareng mangrupi" bahasana kank asepRizal❤ ..mugia sarehat ,lancar Rizkina terus berkarya SALAMINA seu'eur mangfa'atna👍👍👍
Alhamdulillah....aamiin ya robal aalamiin
Very nice. Can you also do a project on WLed Staircase Light
someone has already made it in this video. I don't know the wiring and how it works yet
ruclips.net/video/9n1dbml9UNE/видео.htmlsi=ZytihI62QLI8Vo21
I tried it on the esp32 board but it does not function properly. In your knowledge any other possibilities. Will try on esp8266 also
Bangga ono boso jowone..❤
Ada sundanya juga. Hehe
Very nice clock sir , good project
Thank you sir
Thank you 🎉🎉🎉🎉
you're welcome. I'm willing to have your work featured in my video.
😊😊😊
Mantap kang...sukses selalu
Aamiin ya robal aalamiin...terimakasih mas
😍😍😍
Mannthaabbbb...👍
Suwun mas....🤩😁
Very nice brother
Thank you
Good work sir me india
Thank you sir
جزاك الله خيرا اخي
Veri nice clock sir ji but not so date and month
Sorry for that
Sir, can you please provide firmware for 6digit 12/24H, esp8266 ws2812b 3px/segments.
of course you can sir. you can download it. see the link in my video description. i share firmware from 1pixel per segments to 10 pixels per segments. i suggest you watch the video from start to finish. thank you.
The watch is very well made. Can an IR sensor be added to it?
wled can be added ir sensor. i have not studied it in custom usermod. which has succeeded rtc usermode
Assalamu Alaikum Sir, have you closed your WhatsApp?
Waalaikum salam
اَلسَلامُ عَلَيْكُم وَرَحْمَةُ اَللهِ وَبَرَكاتُهُ mera naam Abdul Aziz hai main India se hun
وَعَلَيْكُمُ السَّلاَمُ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ
main indoneshiya se hoon
Sir, not showing WLED-CLOCK-NTC-RTC when i am searching on wi-fi network after installing firmware. please help. how it will show?
05:58
Flash Firmware.
D4 should not be connected during flashing (error). if successful. press the reset button or reset power.
if the blue led is on then the firmware is already in the esp8266 device. wifi WLED CLOCK RTC will appear.
move closer to the esp8266 device, there is a possibility that the esp8266 wifi antenna is emitting a weak signal.
@@AsepRizal hi sir, thankyou for your response.
i tried once again, install firmware without led connection with nordmcu wsp8266, it install successfully but not showing on wifi. when i install wled the it work but when i installing your firmware for digital clock it does not show on wifi network.
is there any to insert wifi ssid and password in firmware and then install it to nordmcu so it directly connect to our wifi network without manual add this? if it is possible then please revert.....
which firmware name did you flash.
i will try it.
write the firmware name
@@RavinderSingh-k1zin the esp8266 flash download tool application.
delete (ERASE) the old firmware.
then enter the new firmware.
wifi will appear.
ruclips.net/user/shortsVdC4Ltev-XU?si=EKe-JJQXd0z8J5ee
@@AsepRizal sir, i have used firmware - WLED300esp32.bin, esp322PX.bin, esp323PX.bin, esp324PX.bin but non of these was worked they install successfully but wifi not showing.
i have tried a firmware from old video - ruclips.net/video/kfGs7YVSEp8/видео.html , that is - WLED2PX.bin & wledDATA.spiffs.bin was working fine it shows after installation wled-ap on wifi.
Can I use LDR sensor in this project? So that brightness can be auto low and high
I have tried using LDR usermode. But I haven't been able to adjust the LED light.
you can create some presets as you wish, then set them in time shedule. so it can be bright during the day. dim at night.
Pak tolong buat program yg bisa flash lewat androit, kita tidak ada komputer😌
Ok siap. Sy siapkan minggu ini