A/c Delete on a GM 3800 Series 2 V6, without removing the AC Compressor

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 20

  • @albertellisjr1159
    @albertellisjr1159 Год назад +1

    This was helpful doing the same thing cold winter night for my son on same vehicle With same spring plan I removed the 3 front 15 mm nuts But wasn’t moving your video was good for answering that With the 2 in back and way to not have to mess with the lines Thank you We are Indy this was helpful

  • @dscb1226
    @dscb1226 Год назад +1

    So how did you rerouted the belt

    • @juan2049
      @juan2049 2 месяца назад

      He didn’t need to reroute the belt. He put an AC bypass pulley

  • @craigedwards9056
    @craigedwards9056 3 года назад +3

    So what did you do about the extra slack in the belt ?

    • @juan2049
      @juan2049 2 месяца назад

      He put an AC bypass pass pulley. There is no extra slack

  • @IKnoImTrash
    @IKnoImTrash 4 года назад +2

    If it is completely frozen could that cause metal to be in the cooling system or should I be good just changing the compressor? I couldnt get my car to turn over, and so I changed the starter and battery thinking that was it. Still wouldnt crank but it wanted to. Took my serpentine belt off and the car cranked so I narrowed it down to a pulley. Turns out my a/c compressor was completely frozen to the point were the car couldn't turn over. Just need to know if everything needs to be flushed before changing out the compressor or if it is safe to just change out the compressor.

    • @alejandrocastro6323
      @alejandrocastro6323 10 месяцев назад

      I know this comment is old, but hopefully, my comment still has some use. The ac commpresser being ceased and exploding won't cause for metal shavings going into the cooling system or oil. The ac is externally mounted and not connected to the cooling or oil system. The ceased pully can cause the belt to come off and if it's really bad the engine wont turn over. The best thing to do is replace the ac compression or do a bypass/ ac delete.

  • @Death5007
    @Death5007 Год назад

    I cant find the bypass pulley anywhere do you know where i can get one?

  • @kgoddard1964
    @kgoddard1964 3 года назад +2

    the first 3.8 had an alternative belt routing and a delete pulley was not necessary.

  • @vendinomics
    @vendinomics 3 года назад

    Really clean engine

    • @CactusSnD
      @CactusSnD 3 года назад

      I have a 97 Buick just as clean lmao

  • @tennybaby09
    @tennybaby09 4 года назад

    Question sir, so my compressor hasn't gone out yet bit recently started making noise from the pulley of the ac compressor, my question is since you rigged your sons car does it still make noise from the bad bearings in that ac compressor pulley? And did you just unbolt the compressor and disconnect the ac lines?

    • @alejandrocastro6323
      @alejandrocastro6323 10 месяцев назад

      The sound is the ac clutch burning. You would have to either replace the whole commpresser. do a delete or bypass the ac.

  • @teamliprippers5566
    @teamliprippers5566 4 года назад

    My compressor just locked up what size belt do i need to by pass the AC?

    • @ForDemEnglish
      @ForDemEnglish 4 года назад +1

      this same engine can't bypass on my buick need the dummy pulley and a new belt fairly cheap. didn't know it was this easy.

  • @nolantorrence7124
    @nolantorrence7124 5 лет назад

    Love you chuck

  • @tatumharrington9851
    @tatumharrington9851 4 года назад

    Where do you get that kit can you get it at a part store?

  • @terrya450
    @terrya450 11 месяцев назад

    fixing cars like this is not smart for emergency yes for a permanent repair definitely foolish

  • @sipp4238
    @sipp4238 2 года назад

    That shit was horrible