This is great, I'll recommend your videos to all VMware engineers. Look forward to the next ones deploying a workload & hopefully an SDDC upgrade of environment
Thanks very much. Make sure they subscribe. :). As for upgrades. I would love to do one, I will have to see if the S/W I get from VMUG will allow us to do upgrades - I know in the past it didn't. Thanks again and have a good one.
Thanks alot. Appreciated. I have a 2 questions: 1. Regarding the spreadsheet, it did not ask about the disk groups its going to create for the VSAN. What if we have more than 1 capacity disk (3 or more ) and what if we want to have RAID 5 or RAID 6 for 2 disk groups ? (not .json) Because, their is a possibility that we may need more storage if we are choosing the Cosolidated Architecture. 2. Can we change any of the parameters that we mentioned in the spreadsheet after the successfully deployed Management domain. Eg. IP address or a hostname.
Thanks for watching. Great question. Everything is done based on the VMware Validated Designs.. So it will grab the drive and make multiple disk groups. As for RAID 5/6 - that is not done at the disk group level - it is done at the storage policy level and assigned to the VM(s). After the deployment, you can add more disk groups if required.. As for changing Host names and IP's.. Not a good practice, and I would assume it is not supported.. Hope this helps and thanks for watching. Have a good one..
Good Day Im following your video to built my own nested lab using workstation. I got stuck on creating the ESXi host How do we configure the vSan part (Cache and capacity) using the workstation. I see you have given 30 GB for Boot , 100 GB for flash and 1000 GB for capacity Specifying this on workstation and adding the same in worksheet (cloud builder) Will it create the vSan datatore ? Without doing any additional configuration ?
If it failed on the vSAN config, make sure the drives you have for each host are recognized as Flash.. You can select the drives and mark them as flash if they show up as HDD. Thanks for watching. Have a good one
This is great, I'll recommend your videos to all VMware engineers. Look forward to the next ones deploying a workload & hopefully an SDDC upgrade of environment
Thanks very much. Make sure they subscribe. :). As for upgrades. I would love to do one, I will have to see if the S/W I get from VMUG will allow us to do upgrades - I know in the past it didn't. Thanks again and have a good one.
It is really good video for VCF learning for all level. Thank you for your video
It's my pleasure. Thanks for watching and have a good one
I look forward to your next video
Thanks. Have a great day
Your awesome 🎉❤
thank you. Have a good one
Thanks alot. Appreciated.
I have a 2 questions:
1. Regarding the spreadsheet, it did not ask about the disk groups its going to create for the VSAN. What if we have more than 1 capacity disk (3 or more ) and what if we want to have RAID 5 or RAID 6 for 2 disk groups ? (not .json)
Because, their is a possibility that we may need more storage if we are choosing the Cosolidated Architecture.
2. Can we change any of the parameters that we mentioned in the spreadsheet after the successfully deployed Management domain. Eg. IP address or a hostname.
Thanks for watching. Great question. Everything is done based on the VMware Validated Designs.. So it will grab the drive and make multiple disk groups. As for RAID 5/6 - that is not done at the disk group level - it is done at the storage policy level and assigned to the VM(s). After the deployment, you can add more disk groups if required.. As for changing Host names and IP's.. Not a good practice, and I would assume it is not supported.. Hope this helps and thanks for watching. Have a good one..
Thanks a lot !!!
You are welcome! Thanks for watching. Have a great day
❤ awesome video
thanks a lot
You are most welcome. Thanks for watching and have a good one.
Good Day
Im following your video to built my own nested lab using workstation.
I got stuck on creating the ESXi host
How do we configure the vSan part (Cache and capacity) using the workstation.
I see you have given 30 GB for Boot , 100 GB for flash and 1000 GB for capacity
Specifying this on workstation and adding the same in worksheet (cloud builder)
Will it create the vSan datatore ? Without doing any additional configuration ?
If it failed on the vSAN config, make sure the drives you have for each host are recognized as Flash.. You can select the drives and mark them as flash if they show up as HDD. Thanks for watching. Have a good one