Ford Fiesta 1.0 EcoBoost - P2187 - Forscan - Smoke Pro Testing - Diagnose and Fix

Поделиться
HTML-код
  • Опубликовано: 12 ноя 2024

Комментарии • 61

  • @Sevy77
    @Sevy77 5 лет назад +3

    Great video keep them coming, very clear and easy to understand,

  • @formulaveepinetown
    @formulaveepinetown 10 месяцев назад +3

    Hello from South Africa. Found the same fault and problem on a Fiesta EcoBoost here in South Africa. Thanks to ur video we have solved the problem.

    • @bigdtheory8783
      @bigdtheory8783 2 месяца назад

      Hey what did you change?

    • @formulaveepinetown
      @formulaveepinetown 2 месяца назад

      @@bigdtheory8783 hello. Found a black vacuum pipe at back of engine had rubbed through on aircon pipe. Small hole used epoxy to seal hole and taped over. Car 100%. Pipe was too expensive to replace here in South Africa.

  • @brianiswrong
    @brianiswrong 4 года назад +2

    As the owner of a 2013 ecoboost 125 fiesta,thankyou for documenting this problem.
    Mine is running fine at 108'000 miles but to gain knowledge never hurts.

  • @alfik31
    @alfik31 4 года назад +2

    Bardzo dziękuję za podpowiedż . Uszkodzenie pasuje do wszystkich aut. Ja miałem Mondeo 2.0 ECOBOOST i diagnoza trafna. Jeszcze raz DZIĘKI.
    Thank you very much for the hint. The damage fits all cars. I had Mondeo 2.0 ECOBOOST and the diagnosis was correct. Thanks again.

  • @ad9ack82
    @ad9ack82 Год назад +1

    Excellent video. This was my exact issue. Saved me so much time. Thanks.

  • @soranghafour
    @soranghafour 4 года назад +2

    Top notch diagnostic assessment and rectified, great

  • @Vv1972
    @Vv1972 4 месяца назад

    Manu thanks for your job and showing us !

  • @codysautodiagnosticsprogra8706
    @codysautodiagnosticsprogra8706 5 лет назад +2

    Great video like always Steve! Really enjoy your videos and documentation, I also like how you took a preventative measure and taped up the new house, so it won’t happen again. Great work buddy

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад +1

      Thanks Cody. Really enjoying your videos too. Keep up the good work.

  • @wacman
    @wacman 3 года назад +1

    Thanks just helped me find the same fault, had no fault codes just high engine revs on tick over.

  • @linabaptiste7916
    @linabaptiste7916 2 года назад +1

    Good job @SY Diagnostics. I had exactly the same problem as you and you helped me solve it. Thank you very much

  • @8power0
    @8power0 5 лет назад +1

    THANKS FOR THE VIDEO , THAT WAS A SPOT ON DIAGNOSIS WOULD LIKE TO SEE A O2 SENSOR DIAGNOSTIC AND PIN POINT TEST . ALWAYS A PLEASURE TO LEARN SOMETHING NEW THANKS AGAIN !

  • @DylanRabier
    @DylanRabier 5 лет назад +1

    Great diag as always. Thanks for sharing 👍

  • @fredshead3956
    @fredshead3956 Год назад +1

    What a brilliant bloke Steve, we have had exactly this trouble, EVAP pipe has rubbed through on the A/C pipe behind the back of the engine /master cylinder, would have taken a long time to find it without this video, what the guy is going to do about it i dont know, looks horrible to change...thanks for that Fred in Essex..UK.

    • @MRae97
      @MRae97 Год назад +1

      I've got this exact problem but I can't find the part anywhere.. any chance you have the part number or where to find one? Thanks

    • @fredshead3956
      @fredshead3956 Год назад

      Hi there, well this was my next door neighbours car, he put some tape around the hole and as far as i know its still like it, but you should be able to get it from your local Ford agent or a scrap yard..Fred.

    • @fredshead3956
      @fredshead3956 Год назад

      If you cant get anew one, i suggest you take it off, give it a good lean wrap some sef amagamated tape around it, and some plastic tape over that, and put it back on making sure its now chafing anywhere, maybe some cabe ties, keep away from a/c

    • @fredshead3956
      @fredshead3956 Год назад

      Keep away from A/C pipe@@MRae97

    • @MRae97
      @MRae97 Год назад +1

      @fredshead3956 that's a good shout, much appreciated!

  • @AbbottAutomotive
    @AbbottAutomotive 5 лет назад +1

    Top work Steve 👍🏻
    The disco was cool too 😉 Oh and I see we have a anti-smoker on board! 🙄

  • @ovidiuvasile9769
    @ovidiuvasile9769 Год назад +1

    Nice good I found the same fault on ford fiesta thanks

  • @aiedenbaker3767
    @aiedenbaker3767 29 дней назад

    Mines saying the same on ST, garage doing a smoke test on it. Hopefully it’s something silly like that and not too costly

  • @555Scatty
    @555Scatty 5 лет назад +1

    Loving the new intro 👌🏻👍🏻

  • @leewalerzak
    @leewalerzak Год назад +1

    Thanks you've just found my problem for me iv checked mines exactly the same I knew it was running lean I could tell by the way it was idling.. no eml light but the same code is stored

    • @MRae97
      @MRae97 Год назад

      any chance you got a part number for the replacement pipe?

    • @leewalerzak
      @leewalerzak Год назад

      @user-gg1mo6rn2z I'm sure I can find it for you are you in the UK? I just went and got one from ford

    • @MRae97
      @MRae97 Год назад

      @leewalerzak yeah im in the UK, I've found lots of similar pipes but not the exact one.. I've got the same model and year as the fiesta in the video 👌🏻

    • @leewalerzak
      @leewalerzak Год назад

      @user-gg1mo6rn2z honestly mate get one from ford just ask for the vacuum line it comes as a complete replacement about 100 quid and takes about 10 minutes fit really easy job. Also if I remember right the part numbers changed cus they changed the design to stop it rubbing so the last 2 letters of the part number will be different but it will fit worse case scenario you can return it

  • @iankelly2110
    @iankelly2110 5 лет назад +1

    Great work steve

  • @ichamachtir7609
    @ichamachtir7609 3 года назад +1

    Thanks very clear!

  • @vdubs6068
    @vdubs6068 5 лет назад +1

    Great vid Steve 👍

  • @alessi4249
    @alessi4249 3 месяца назад +1

    Exactly the same issue thank you! What is that hose part name?

    • @SYDiagnostics
      @SYDiagnostics  3 месяца назад

      Glad my video helped. The name, I cant remember, but im sure it can be identified on the parts program

    • @alessi4249
      @alessi4249 3 месяца назад +1

      Think I've found that it's a fuel vapor vacuum hose part numbers C1B1-9C987-AB 9c987 might need to get it off to look at the actual part number on it but given me a head start. Cheers!

  • @Zoomer.88
    @Zoomer.88 4 года назад

    Fantastic video!

  • @lewencashy6359
    @lewencashy6359 6 месяцев назад

    What’s the pipe called, got the same issue, any links to the part please, I’m uk based cheers

  • @TheVxPromate
    @TheVxPromate 2 года назад +1

    Could this apply if my car's running rich instead of lean ?

  • @v4vauxhall498
    @v4vauxhall498 5 лет назад +3

    Skoda do you use your vcm or elm with the forscan ? Nice vid mate.

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад +1

      vcm2 annd vcmm are both used in my videos

    • @iankelly2110
      @iankelly2110 5 лет назад

      some more vids from you Joe would be nice PLEASE :)

    • @diesalweasel
      @diesalweasel 5 лет назад

      I with forscan elm is used but it needs the switch for can hs and can ms hope this helps

  • @madds6678
    @madds6678 5 лет назад +2

    That dash is crazy looking reminds me of E.T”s head

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад +2

      There is a pic on the internet comparing the dash and steering wheel to roland rat !! its uncanny too ! lol

    • @simonsherwood7169
      @simonsherwood7169 5 лет назад +2

      Once you see Roland there’s no going back

  • @VLGSHow
    @VLGSHow 3 года назад +1

    I have same syntoms in my car with same engine, but in a focus.

  • @barkatakiutpal
    @barkatakiutpal 3 года назад +1

    Which VCI you are using with forscan in this video?

  • @sandyande
    @sandyande 5 лет назад +1

    Cheers Steve, any cheap smoke machine u think is worth a look? Cheers sandy

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад +1

      Autool do some cheap ones with built in compressors. I hoping to test some of their gear soon

    • @diesalweasel
      @diesalweasel 5 лет назад +1

      @@SYDiagnostics hi steve. Where did you have that smoke machine connected up to and where did you obtain that machine best regards

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад

      @@diesalweasel smoke machine was connected direct to the intake pipe from the air filter. Smoke machine is something i've had for around 8 years now. Autool do some that dont require compressors (mine requires a compressor)

  • @tonypond8196
    @tonypond8196 5 лет назад +2

    nice diag s.y , must say after seeing your vids I would never buy a Ford nothing but trouble they look really poor quality .

    • @SYDiagnostics
      @SYDiagnostics  5 лет назад +4

      Ha ha..... All isolated cases. I find them more reliable than the VAG vehicles I came from

    • @tonypond8196
      @tonypond8196 5 лет назад +1

      @@SYDiagnostics AGREED ford are much better than the VAG group .