We just hit 200k Subs on here! Thank you guys so much I appreciate it more than you guys know! We've been having some tech difficulties and lost all our footage thus so long since the last upload.
Congrats! You are very entertaining to watch and always positive, even when things don’t go right like the speedo issue. Westen, you’ve got the gift of gab and you are so down to earth. I predict 1 million subs by Christmas!
Don't lie. You hit 200k 4 days ago. :) As of when this was written, 208k. Good job, I can hear the genuine excitement in your voice wen working on these vehicles.
Something I learned a long time ago is if I'm working on something tall like your fummins I'll pull the valve stem cores and let the tires go flat. You can always air up tires after the project. If that isn't enough I'll jack the front up with a GOOD floor jack then take the front tires off and let the jack all the way down. I've also been known to hook up the backhoe to the front, pull the wheels then set it down flat on the ground. Whatever works. Just throwing some ideas out there for others to try. Great video as always Westen!!!
Westen, I gotta say. I came for the tractor videos. I stayed for the fummins. Keep doing you, your production has come a long way and you’re finally getting the recognition you deserve. You’ve got HUGE potential to be a million subscriber channel, and nobody deserves it the way you do. You produce videos that are about southern guys having fun with big trucks and tractors and everything that goes along with it. Keep it up brother 🤘🏻
My 2002 RV with the Cummins 5.9 would make the RPM gauge drop to zero then flip back to idle every two seconds (engine light on) . Figured out most likely was Alternator, but problem went away
Congrats on 200k. Been here since around 10k. And you definitely deserve all the sins and views. Love all your videos. Keep up the good genuine content
Westen I stumbled on your channel a week ago and I cannot stop watching. My husband and I enjoy your projects. Your personality is so much like ours. Sending love from Hillsborough/Polk county FL!
Westen I bought a 2019 Ram 2500 Cummins two months ago and found you. I just subscribed not because I am about to rebuild a motor or truck but because of your fun loving personality and likeable character. Keep on keeping on and doing you because its cool and it works....
You should always start with the hardest to get to bolt so it doesn’t have all the extra pressure or part weight on it. Just a small piece of advice. Also you should get a bigger cooler ! Comfort is everything
WOW WESTEN!!!! YOU WENT FROM 200K TO 1.21 MILLION IN ABOUT A YEAR AND A HALF! WAY TO GO BIG BROTHER. MAN I LOVE YOUR CHANNEL. I HOPE SOME DAY I GET TO MEET YOU IN PERSON BUDDY. YOU ARE BY FAR THE BEST CHANNEL ON RUclips WHEN IT COMES TO THIS STUFF.. TAKE CARE BROTHER. KEEP DOING WHAT YOU DO CUZ ITS DEFINITELY WORKN!!!!!!
Your excitement is contagious love your videos man. I inherited my best friend’s f250 back in June when he passed away in a motorcycle accident we had a ton of plans for it I just haven’t been able to bring myself to start tearing it apart but your videos have got me feeling a bit more enthusiastic about it👍🏼👍🏼
Westen, Flashback moment watching you work on the turbo in a tight spot. When I was a kid goforing in a garage those were my jobs because I had small hands. Jim used to just dangle me into the engine compartment and I got on with it! Meant we left many an engine in that would have otherwise had to come out!😀. Top stuff as usual!! Regards Stephen.
We had the same problem with our 6.4 the sensor in the rear end went and it would go from 40-60 once or twice but I don’t know if it’s the same with a Cummins swapped
I'm seriously wanting to do this swap. I love my second gen but I drive a 2019 f450 at work everyday and I love how they ride. One of these days I'll probably pull my 12 valve from my second gen and slap it in a Ford.
What i did because I used the industrial bell hlising with my cummins swap, is i bought a second gen manifold and welded a spacer pipe to the manifold and moved the turbo closer to the frame. Put my turbo in exactly the right spot. Im swapping my 82 chevy.
i have been working on cars and trucks since i was 12 i am glad to see this man as young as he is get with it and knows what he is talking about and he makes it funny to watch
Westen can you please do a video on how you learned so much about automotive technology at such a young age. Your knowledge base is truly impressive and I love watching you do things most people could never pull off. Stay safe brother!
The same way as everyone learns anything. Study, practice and learn from your mistakes. Unless you quit only two things can happen you mess up or do it right.
@@masturone8257 Easier said than done on your own. He had to start somewhere which is what I was asking. Did he begin with his Dad or another relative or friend? He has a ton of knowledge at a very young age on not only how to do things but even in problem solving and fabrication. I work with engineers who would struggle to do half of what he does. That’s why I was asking about his background.
@@alanholmes2366 yea I'm sure he studied his dad or grandad doing it and when he was big enough to try it he started practicing and then didn't give up when he made mistakes he learned from them. It's just parts you take apart then put together and if you get stumped you check out a manual online if its not in a manual then you make your own instructions. He not building motors or running machine shop. Most is doing basic work fitting motors (may need some cutting and welding) modifying wiring harness. He sends out anything that requires lubrication and uses a tune. He builds awesome stuff but it's as simple as just starting to do it.
@@masturone8257 lol well I’m impressed. Few things I’ve learned were hard. No dad or anyone to mentor me. I wish I had half his knowledge and I’m older than he is.
@@alanholmes2366 dude I bet you could learn all this in a year or two. Start with some vids and if it's too expensive to buy a car to learn on and don't wanna be taking apart the one you drive then buy a small version of a car and start there like a dirtbike or even RC whatever has a motor and you build, rebuild, modify. Who knows if he had a dad that is me assuming cause in all his vids he only mentions his mom (he comes from money) so it may be just him and his friends showed each other growing up. You are 100% right thou it is impressive and cool 😎 what he does.
Take a sip not a drink when u hear Turbo!!!!!!! You gota ration the beverage!!! And repeat!!!!! Good times fellas.......... sweatin to the wrench turning is the workout DVD comin soon to a feed store near you!!!!
Steps to building a fummins. Step 1. watch these videos. Step 2. learn from the frustrations of the fummins videos. Step 3. build the engine with power mods before installing the engine, and accessories. Step 4. install and test engine/wiring without radiator Step 5. install radiators, intercooler, and fill A/C Step 6. profit, and lower frustrations. The OG steps of the video series Steps. 1-6 remove three engines, there is only two but for some reason I've forgot the industrial cummins is different. Step 7. got a oil pan and shortened my drive shaft (haha shaft). Step 8/9. install power mods with everything in the way. step 10. frustrations. Step 11. drive with loads of coal Step 12. install turbo for proper coal proportions per the Ft pound torque horse powa. Step 13. make this a youtube series. Good work on the build dude, very informative and good luck on the future builds.
Great video series 'bout Fummins!!; One very respectful suggestion: Whenever you're about to turn the engine off, (specially if you've driving @ cruising speeds), let it idle for some seconds to allow the turbo's speed to slow down. Its lubrication usually depends on the engine's oil pressure, unless said engine has an independent electric oil pump & circuit. Best regards & enjoy your great works on Fummins!!😉👍
DUDE ........TURBSKI........DUDE.........TURBSKI I love me a big TURBSKI! I used to have a fat shaft 64 silver bullet on my 05 dodge. It was awesome . Thanks for the Video!
For all of time man has searched for the source of true happiness and now thanks to Westin we finally know the answer "a big old turbo charger". You are a wise man. Thank you for fixing humanity sir!
@@powerkingspowerstroke1405 i mean i know the 6.0l isnt the best but i have this draw to it, idk why they just fascinate me and iv wanted one ever since i was about 14 when i really started getting into trucks im 23 now and really am leaning towards getting a rolled over 6.0l with near the same miles my truck has now 161k or less im sure i can find it and do the swap with a donor
RyanPlays it has its problems just like everything that’s man made. That’s what people don’t understand. It’s man made, it’s not going to be perfect, it’s gonna have flaws. And honestly it’s better to spend $3,000 making the 6.0l reliable then $3,000 every year for a new dodge tranny. I have 145,000 on my truck and it’s not studded and I run it on tow tune all the time
@@powerkingspowerstroke1405 yeah, but you can also egt “bulletproofed” trannys for thedodges, i generally dont like dodge, i dont like fiat or Chrysler either, im going to get a 6.0l or im gonna end up buying a brand new truck eventually when my truck dies, one way or another ill have a diesel lmao
RyanPlays Fords the way to go man, as long as you take care of them. They’re number 1 best selling for 43 years for a reason lol. I’d much rather take a dodge over a Chevy any day of the week. Go check out my flutter video
awsome video westen definlly something funky there hopefully you fix it soon i want to see this truck get catalogged across the world lol thumbs up and shared
When taking off the turbo with the standard wrench make sure that you swap out and used the gear wrench instead of the plan wrench. Makes life so easier to get bolts off. Also make sure you send me the old factory turbo to me.
@@Akhazmat907 i actually saw that it was just the first part of the video he just didnt close it all the way. i commented before he even stopped in his driveway.
Hey Westen - you need to look at the copart location in Dayton Ohio. They got a 2017 f350 6.7 power stroke super duty dually! Thing looks great, but needs and new bed. It runs and drives! Would be cool to see it on the channel!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
We just hit 200k Subs on here! Thank you guys so much I appreciate it more than you guys know! We've been having some tech difficulties and lost all our footage thus so long since the last upload.
Congrats. Doing a great job on the videos. You make it look easy, even though these projects are a pain in the ass.
xr200rcj he does a great job.🤠
Congrats! You are very entertaining to watch and always positive, even when things don’t go right like the speedo issue. Westen, you’ve got the gift of gab and you are so down to earth. I predict 1 million subs by Christmas!
Really enjoy your videos, I've watched all of them!
Don't lie. You hit 200k 4 days ago. :) As of when this was written, 208k. Good job, I can hear the genuine excitement in your voice wen working on these vehicles.
Next time your brother says it's smokin! Put the dang camera out the window lol I wanna see it!
Right!!!!
Yea I kinda wanted to smack him for that.
Would've been cool to see the turbo psi also.
For real!! Let's see the roll!
@@trowhammerdespoilerofgalax2423 same lol
Something I learned a long time ago is if I'm working on something tall like your fummins I'll pull the valve stem cores and let the tires go flat. You can always air up tires after the project.
If that isn't enough I'll jack the front up with a GOOD floor jack then take the front tires off and let the jack all the way down.
I've also been known to hook up the backhoe to the front, pull the wheels then set it down flat on the ground. Whatever works. Just throwing some ideas out there for others to try.
Great video as always Westen!!!
Or stand on a ladder or cement block.
Congrats on over 200k well deserved keep it going man
thanks bud!
Sheesh 2 years later he got 2mill
@@christianrivera9256 2.6 now
We’ve been needing this Fummins content.
Westen, I gotta say. I came for the tractor videos. I stayed for the fummins. Keep doing you, your production has come a long way and you’re finally getting the recognition you deserve. You’ve got HUGE potential to be a million subscriber channel, and nobody deserves it the way you do. You produce videos that are about southern guys having fun with big trucks and tractors and everything that goes along with it. Keep it up brother 🤘🏻
Our old Hilux speedometer did the same thing for a time, the problem in the end, was in the alternator. Great video!
My 2002 RV with the Cummins 5.9 would make the RPM gauge drop to zero then flip back to idle every two seconds (engine light on) . Figured out most likely was Alternator, but problem went away
Congrats on 200k. Been here since around 10k. And you definitely deserve all the sins and views. Love all your videos. Keep up the good genuine content
Nothing like a good mechanic with good humor. Love your channel, I learn so much just from your channel. Keep up the awesome videos.
Westen I stumbled on your channel a week ago and I cannot stop watching. My husband and I enjoy your projects. Your personality is so much like ours. Sending love from Hillsborough/Polk county FL!
Westen I bought a 2019 Ram 2500 Cummins two months ago and found you. I just subscribed not because I am about to rebuild a motor or truck but because of your fun loving personality and likeable character. Keep on keeping on and doing you because its cool and it works....
Brett Cummings did you get it deleted?
@@Greg-op7lg Not yet but as soon as that warranty is up consider it done!
Brett Cummings nice good idea👍 nice truck btw.
We haven’t heard from Beyoncé in while. Does she have an issue with the Fummins? 😁
I thought he was saying Thummins? Other wise working on it is hard on the thumbs.
@@JUST_ONE_ID10T It's Fummins=Ford+Cummins. Nice nom de plume you've got, too...😂
You missed Beyonce's birthday last week.
This is hands down one of my favorite channels on RUclips. Keep up the great work man.
You should always start with the hardest to get to bolt so it doesn’t have all the extra pressure or part weight on it. Just a small piece of advice. Also you should get a bigger cooler ! Comfort is everything
These videos are great! Keep em' coming. Also, amazing how simplistic the old diesels are!
WOW WESTEN!!!!
YOU WENT FROM 200K TO 1.21 MILLION IN ABOUT A YEAR AND A HALF! WAY TO GO BIG BROTHER. MAN I LOVE YOUR CHANNEL. I HOPE SOME DAY I GET TO MEET YOU IN PERSON BUDDY. YOU ARE BY FAR THE BEST CHANNEL ON RUclips WHEN IT COMES TO THIS STUFF.. TAKE CARE BROTHER.
KEEP DOING WHAT YOU DO CUZ ITS DEFINITELY WORKN!!!!!!
Love the good ol Fummins!! Cant wait for more Mustang content though. Keep up the great content man!
Your excitement is contagious love your videos man. I inherited my best friend’s f250 back in June when he passed away in a motorcycle accident we had a ton of plans for it I just haven’t been able to bring myself to start tearing it apart but your videos have got me feeling a bit more enthusiastic about it👍🏼👍🏼
Even though you have 200k subs you are still underrated you deserve 1 million subs you are humble and funny and have great content keep it up man
text me:) I have a question for you +1 (817) 270-6440
This aged well
Westen, Flashback moment watching you work on the turbo in a tight spot. When I was a kid goforing in a garage those were my jobs because I had small hands. Jim used to just dangle me into the engine compartment and I got on with it! Meant we left many an engine in that would have otherwise had to come out!😀. Top stuff as usual!! Regards Stephen.
Hell yeah ! A new upload 😬🙌🏻
Congratulations for over 200.000 subscribers 👍🏻
Dont know how i found your channel some months back but it is a gem!! The Fummins has been the best series. Cant wait for the other projects !
Love this build series man and you’re videos they’re awesome
Appreciate the love for BorgWarner, sir! I work at the turbocharger plant in Asheville, NC.
Your speedometer problem might be the VSS (Vehicle Speed Sensor).
Thats what i was about to say
Stepper motor.
We had the same problem with our 6.4 the sensor in the rear end went and it would go from 40-60 once or twice but I don’t know if it’s the same with a Cummins swapped
I'm seriously wanting to do this swap. I love my second gen but I drive a 2019 f450 at work everyday and I love how they ride. One of these days I'll probably pull my 12 valve from my second gen and slap it in a Ford.
Keep it going Westin. You are doing great and always have great content
Drinking game with the word "Turbo!" And go!!!
I was thinking just an hour ago, it's about time Weston uploads a video!
Found your channel yesterday and haven't stop watching since,but jesus man pay attention to the road when you drive
HA! Had to pause at the moving air like a politician bit.
What i did because I used the industrial bell hlising with my cummins swap, is i bought a second gen manifold and welded a spacer pipe to the manifold and moved the turbo closer to the frame. Put my turbo in exactly the right spot. Im swapping my 82 chevy.
Love watching your video very educational. Like the farm atmosphere.
Always love the positivity from every video!
Great video as always Westen..
Awesome channel you have here.
Congratulations on your subscribers! That's a major accomplishment🇺🇲🇺🇲
The speedometer just couldn't handle all that Murica
i have been working on cars and trucks since i was 12 i am glad to see this man as young as he is get with it and knows what he is talking about and he makes it funny to watch
She smokes more than Willie Nelson. Classic.
Where did you learn so much about working on diesels?
Great question!!! Especially at his age!!?? Westen's only 21!!!
If I had to guess, life on a farm
Westen can you please do a video on how you learned so much about automotive technology at such a young age. Your knowledge base is truly impressive and I love watching you do things most people could never pull off. Stay safe brother!
The same way as everyone learns anything. Study, practice and learn from your mistakes. Unless you quit only two things can happen you mess up or do it right.
@@masturone8257 Easier said than done on your own. He had to start somewhere which is what I was asking. Did he begin with his Dad or another relative or friend? He has a ton of knowledge at a very young age on not only how to do things but even in problem solving and fabrication. I work with engineers who would struggle to do half of what he does. That’s why I was asking about his background.
@@alanholmes2366 yea I'm sure he studied his dad or grandad doing it and when he was big enough to try it he started practicing and then didn't give up when he made mistakes he learned from them. It's just parts you take apart then put together and if you get stumped you check out a manual online if its not in a manual then you make your own instructions. He not building motors or running machine shop. Most is doing basic work fitting motors (may need some cutting and welding) modifying wiring harness. He sends out anything that requires lubrication and uses a tune. He builds awesome stuff but it's as simple as just starting to do it.
@@masturone8257 lol well I’m impressed. Few things I’ve learned were hard. No dad or anyone to mentor me. I wish I had half his knowledge and I’m older than he is.
@@alanholmes2366 dude I bet you could learn all this in a year or two. Start with some vids and if it's too expensive to buy a car to learn on and don't wanna be taking apart the one you drive then buy a small version of a car and start there like a dirtbike or even RC whatever has a motor and you build, rebuild, modify. Who knows if he had a dad that is me assuming cause in all his vids he only mentions his mom (he comes from money) so it may be just him and his friends showed each other growing up. You are 100% right thou it is impressive and cool 😎 what he does.
"This is one of them where you gotten loosen it by braille" loooool
I lost it when he said that.
HA! Had to pause at the moving air like a politician bit.
Take a sip not a drink when u hear Turbo!!!!!!! You gota ration the beverage!!! And repeat!!!!! Good times fellas.......... sweatin to the wrench turning is the workout DVD comin soon to a feed store near you!!!!
WESTEN FOR PRESIDENT, he tells it like it is when he speaks of Politicians moving air.
@jay carlos - officially, agreed!
Steps to building a fummins.
Step 1. watch these videos.
Step 2. learn from the frustrations of the fummins videos.
Step 3. build the engine with power mods before installing the engine, and accessories.
Step 4. install and test engine/wiring without radiator
Step 5. install radiators, intercooler, and fill A/C
Step 6. profit, and lower frustrations.
The OG steps of the video series
Steps. 1-6 remove three engines, there is only two but for some reason I've forgot the industrial cummins is different.
Step 7. got a oil pan and shortened my drive shaft (haha shaft).
Step 8/9. install power mods with everything in the way.
step 10. frustrations.
Step 11. drive with loads of coal
Step 12. install turbo for proper coal proportions per the Ft pound torque horse powa.
Step 13. make this a youtube series.
Good work on the build dude, very informative and good luck on the future builds.
Sounds awesome I love a bit of whine in the morning!!! What's happening with the Mustang??
I watch ever since you brought this truck home and you have transformed it to a great truck.
I have to say, I've never wanted a Ford truck more than ever after watching this.
Did anyone notice the Cummins smiling when the new turbo was installed?👍POWER 💥
Bigboy, just fire up Waze and use the speedometer part of the gps on the App.
LOL!!! I know that damn bolt!!! just took the turbo off my 01and I cussed that stupid bolt for a half hour. Love the build! Thanks for the vids man.
Brother I've found taking the manifold and turbo together it's a must on the new Dodge no room.
What an amazing and badass way to start an intro!
Sometimes when you mess with the air mixture you need to tune the engine!
a tune would do wonders!!
congrats 200k hope guys make 2mil enjoy all the videos
Ah yes, loosen by braille AKA the Helen Keller method!
LOL Westen, when loosening the turbo bolt he used the sound track from FABLE. Im glad to see he is getting so many views. He is a true man.
i know its a pain to make videos longer but seeing the break down would help to understand what you are doing
Congratulations on the 200k you guys deserve it
Can you get a 1940s dodge power wagon and put a Cummins in it
Have to replace the axles and diff at least. The stock military engine is well known for breaking rear axle shafts.
Don't tease him
Great video series 'bout Fummins!!; One very respectful suggestion: Whenever you're about to turn the engine off, (specially if you've driving @ cruising speeds), let it idle for some seconds to allow the turbo's speed to slow down. Its lubrication usually depends on the engine's oil pressure, unless said engine has an independent electric oil pump & circuit. Best regards & enjoy your great works on Fummins!!😉👍
Western is melting 😂😂 fkn awesome truck 👍✊🤟😎🇬🇧
Another enjoyable episode well done guys!
So once you fix the speedo, i wonder how fast is the 0-60. Maybe like half a cheeseburger.
Depends on who is consuming it
You positive attitude and spirit are refreshing. God bless
DUDE ........TURBSKI........DUDE.........TURBSKI
I love me a big TURBSKI! I used to have a fat shaft 64 silver bullet on my 05 dodge. It was awesome . Thanks for the Video!
That’s for sure!!!
Westen is awesome. I love this channel
We didn’t even see the smoke smh
Great video man really enjoy your channel one of my favorites keep up the good work ole boy
You should send me your old Turbo. I'm a huge holset fan and that's a big turbo for my engine.
I got a turbo HUGH one i have my black chevy my F450 2008 semi engsinb my dodge ram 3500 my Porsche 911 and my 1999 lifted with 44s F350 funnins
You guys are great. Cant wait to see whats next.
You can GPS speedometer if you'd like, just until it gets fixed a speedometer app is very accurate.
That's what I'd do!
Awesome Truck and it's Not a Junk Ram Truck
Just curious do sell these vehicles and if so where can we look at them and get a price ?
Plus the reliability of a 12 valve the best ever
It’s your shop and it’s hot, time to work in your boxers only...comfort before shame. 😂
My buddy has an f350 dually with a Cummins and an Allison transmission. It's a great set up
You're channel is good when you have 7 likes with only 5 views
that's some kind of math.
Westen Champlin yes it is. Some people are just.......special
@@TexasBeardAdventures It's a Westen video, it's probably good no matter what.
Hey guys congrats on 208K and rising, subscribers. Another fine mess! Have fun and love ya lots. Keep them coming.
Where's Clifford? Sold it? Broken? Congratulations on your # of subscribers!
He took err to the back 40 and shot err ass
For all of time man has searched for the source of true happiness and now thanks to Westin we finally know the answer "a big old turbo charger". You are a wise man. Thank you for fixing humanity sir!
Wish we could of seen it blow some coal.lol.
But the camera guy had different thoughts!
Love this channel. Westen is a natural.
yeah i think imma swap a 6.0l powerstroke into my 5.4l 05 f250, swaps seem fun so yee
RyanPlays DO IT MAN! Love my 6.0l wouldn’t trade it for any other truck, except maybe a 6.7 powerstroke😂
@@powerkingspowerstroke1405 i mean i know the 6.0l isnt the best but i have this draw to it, idk why they just fascinate me and iv wanted one ever since i was about 14 when i really started getting into trucks im 23 now and really am leaning towards getting a rolled over 6.0l with near the same miles my truck has now 161k or less im sure i can find it and do the swap with a donor
RyanPlays it has its problems just like everything that’s man made. That’s what people don’t understand. It’s man made, it’s not going to be perfect, it’s gonna have flaws. And honestly it’s better to spend $3,000 making the 6.0l reliable then $3,000 every year for a new dodge tranny. I have 145,000 on my truck and it’s not studded and I run it on tow tune all the time
@@powerkingspowerstroke1405 yeah, but you can also egt “bulletproofed” trannys for thedodges, i generally dont like dodge, i dont like fiat or Chrysler either, im going to get a 6.0l or im gonna end up buying a brand new truck eventually when my truck dies, one way or another ill have a diesel lmao
RyanPlays Fords the way to go man, as long as you take care of them. They’re number 1 best selling for 43 years for a reason lol. I’d much rather take a dodge over a Chevy any day of the week. Go check out my flutter video
More "horsepurs & torques"!!!!!! Love this truck!
When ever my truck did that speedo thing my alternator wasn’t charging
awsome video westen definlly something funky there hopefully you fix it soon i want to see this truck get catalogged across the world lol thumbs up and shared
Someone start a go fund me so we can get these guys a swamp cooler that actually works!
love the videos West keep up the good work
Just wondering Weston, is AOC a subscriber! LOL
Moron
JOHN ALLEN AOC is subscribed to the theory that cow farts, are destroying the ozone layer.
@@johnbar4126 I was just making a joke. Not trying to upset anyone. She would most likely think I just park my old 48 Chevy.
JOHN ALLEN I know!, aoc is not the sharpest tool in the shed lol
When taking off the turbo with the standard wrench make sure that you swap out and used the gear wrench instead of the plan wrench. Makes life so easier to get bolts off. Also make sure you send me the old factory turbo to me.
"Its smoking" means turn the camera toward the smoke ding dong .
Westen - You are the Man! Always love your videos! Better than TV!!! Keep 'em comin'. :)
Why does your damn hood not line up it gives me anxiety
Because it's a man's truck
It was an auction vehicle. Typical
@@Akhazmat907 i actually saw that it was just the first part of the video he just didnt close it all the way. i commented before he even stopped in his driveway.
Ford trucks are like that
pimpon theline I thought it was unlatched too lol
Hey Westen - you need to look at the copart location in Dayton Ohio. They got a 2017 f350 6.7 power stroke super duty dually! Thing looks great, but needs and new bed. It runs and drives! Would be cool to see it on the channel!
you guys didnt show the smoke. :(
Those are the same turbos in our freightliner m2 Mercedes mbe906 motors it’s a bad ass turbo
Westin, you sound and resemble Martin Licis, the worlds strongest man. Do a collab!
Fuck off
Great video. Entertaining and all. Eventually, Miss B will call!
Didn’t even show how much coal she rolls, good job tho!
Watch his previous videos he shows it in those
Best. Positive guy. Truck is broken and his mood is up in the sky 😂