The extra glue strip at the center interferes with the thermal conductivity of the heat spreader. It lifts the screen and prevents the heat pipe from transferring heat to the screen, which is a large heat dissipation area (to the outside) of the phone. A good rule of thumb with repairs like these is that you should leave it as close to the factory state as possible. There's no reason to modify something unless you have a really good reason to do it.
@@DoItYourselfEasy Thank you i just installed the screen and it powers on but when i enter the pin the screen is unresponsive, i was thinking the heat gun caused too much heat so the 2 minutes would have varied
this is the sloppiest screen replacement that I've ever seen. If you use a heat gun properly the screen would easily come off. why did you put the adhesive in the metal, it was supposed to go to the red lining like the original was.
Im sorry... No Likes..Most of it was in the Shadows and Couldnt be seen ( even with Brightness Up to 100% ) .. New screen was not Shown the underside,.. Pulling at the Cold Adhesive was a Not the Best Option. Sorry if yo have done another of the same ?..please put a Link up. Thx
The extra glue strip at the center interferes with the thermal conductivity of the heat spreader. It lifts the screen and prevents the heat pipe from transferring heat to the screen, which is a large heat dissipation area (to the outside) of the phone. A good rule of thumb with repairs like these is that you should leave it as close to the factory state as possible. There's no reason to modify something unless you have a really good reason to do it.
Mine just cracked this morning. I might give this a try
same here
thanks for the teachings!
You're welcome. Glad to help. Can you please subscribe in return? I would really appreciate it. Thanks.
i need lcd to umidigi one pro,
is it possible to use a replacement from another model? i just need to save the data
Is there anyway to keep the edges tye same after the operation
Probably best to replace them alongside the screen
From your video, it shows the rubber edges won't be the same after this major surgery
I need yo change de rear camera lens, You can help me please?
Hello i have a question if the screen does not respond is there something i can do before i return?
It might not be the screen that is the problem. It could be the mainboard
@@DoItYourselfEasy Thank you i just installed the screen and it powers on but when i enter the pin the screen is unresponsive, i was thinking the heat gun caused too much heat so the 2 minutes would have varied
Where can I buy the screen pl
AliExpress
how do I get screen to buy please?
Please can make a tutorial fot thé connector of Her charger pleaaaase
Please I need a new 6.5 screen for my umidigi Bison
Mine broke on Monday 🤦
And I can't find it here
Its still waterproof after the repairment
My phone too how can I see u
Yea that's definitely not how you want to remove the old screen. And no that wouldn't be water proof any more.
san mka order ng screen ng bison 2021
Can you help me order 6.5 screen for Bison?
Так он же не убиваемый ?
Напиздели. У меня тоже треснул
Gracias a Dios que era cambiando la pantalla si no la Rompía 🤣🤣🤣
You're welcome. Please like, share and subscribe. I would deeply appreciate it.
this is the sloppiest screen replacement that I've ever seen. If you use a heat gun properly the screen would easily come off. why did you put the adhesive in the metal, it was supposed to go to the red lining like the original was.
Im sorry... No Likes..Most of it was in the Shadows and Couldnt be seen ( even with Brightness Up to 100% ) ..
New screen was not Shown the underside,..
Pulling at the Cold Adhesive was a Not the Best Option. Sorry if yo have done another of the same ?..please put a Link up.
Thx
I hope you're not a doctor. Man you butchered that removal process.