You didnt had to desable the inverter or transformer lcd circuit to controler dont recognize lamp problems??? How this can possible worked without made it?
i understand that in this module ,when you increase the brighness the leds will bright less, and when you decrease the brightness , the leds brightness will go more bright, thats a mistake of desing.
I bought these hoping to mount them on a drone, does anyone have any suggestions on how to do that? I just want some bright lights, nothing controllable, just on and off. I'm using lipo batteries. Thanks a million.
i found the way to make it easier bro, i use adapter 12v put inside the monitor case and jumper the AC adapter cable to the AC power of the monitor then voila it's works like a charm..
Markings on my power PCB are different (ON/OFF, ADJ, +13V, +13V, +13V, GND, GND, GND, PWM). Where should I solder ENA and DIM wires? I'm assuming one goes to ADJ and other to PWM but not sure which goes where. Edit: I just read that ENA is ON/OFF, I guess that leaves DIM to ADJ or PWM.
@@wilsondejesusmirandanorena90 hello .. i do not have 12v output of power board . i have 5v .. what can i do ? . should i look for 12v on the board surface ??
@@semihkralan5000 hello Semih 5v is not enough, look for the 12v on the board, remember you must put the ENABLE TERMINAL to a positive voltage to brigh the leds
I've seen this product, but I don't quite get it. Originally CCFL backlights run on 12V AC, but LEDs typically work on DC, so you couldn't just replace CCFLs with LEDs, they wouldn't work. I'm guessing that little board that comes with the strip is meant to create DC for the strip. But if it outputs DC for the LED strip, how come you're also soldering the input to 12V DC?
CCFL certainly does not run on 12V AC. It needs high voltage. The electronics creating that high voltage stay unused, when you replace CCFL by LED strip. The board for LED strip has input 10-25V DC, typically 12V DC. Output is a current source with about 12VDC, usually 3 white LEDs in series create one group in the strip.
hi. tnx for this video. how can i do this for samsung 733nw? on pins just it have 5Volts!
Muy buen vídeo (me ayudó) lo que ya estoy viejo para esa música. Gracias
why does everyone thing that loud music is a good idea?
Idiots with crappy videos and crappier music.
You didnt had to desable the inverter or transformer lcd circuit to controler dont recognize lamp problems??? How this can possible worked without made it?
So when do you mount them in the tv? Use external control for backlight brightness???
you must put the ( dim terminal) to the point marked (adjust) on the board that way the control is made from the tv
gracias me fue miy util
I did this, but the brigtness is just to dark, any idea? Maybe need more voltage? The driver is connected to a 12v source from the board...
You need a brighter LED strip. Larger LEDs on the tape.
i understand that in this module ,when you increase the brighness the leds will bright less, and when you decrease the brightness , the leds brightness will go more bright, thats a mistake of desing.
Do you need a constant current board or a display backlight belt? We are the manufacturer.
I bought these hoping to mount them on a drone, does anyone have any suggestions on how to do that? I just want some bright lights, nothing controllable, just on and off. I'm using lipo batteries. Thanks a million.
bro where can i buy backlight strip for aoc monitor
halo friends, do u know where's the 12v pin in the lenovo (d186wa) monitor ?
i'am frustrated to find the pin, please help..
with the help of a tester in voltage dc, measure the voltages to find the right one, remenber the inverter works with 12v or 24v, that will be fine.
i mean ,in the conectors, you will find the right voltage,dont worry its easy,my friend.
i found the way to make it easier bro, i use adapter 12v put inside the monitor case and jumper the AC adapter cable to the AC power of the monitor then voila it's works like a charm..
Our company has display backlight belt and constant current board.
muzika je super
Markings on my power PCB are different (ON/OFF, ADJ, +13V, +13V, +13V, GND, GND, GND, PWM). Where should I solder ENA and DIM wires? I'm assuming one goes to ADJ and other to PWM but not sure which goes where.
Edit: I just read that ENA is ON/OFF, I guess that leaves DIM to ADJ or PWM.
you are right, on7off is same like enable ,and dim =adj
@@wilsondejesusmirandanorena90 hello .. i do not have 12v output of power board . i have 5v .. what can i do ? . should i look for 12v on the board surface ??
@@semihkralan5000 hello Semih 5v is not enough, look for the 12v on the board, remember you must put the ENABLE TERMINAL to a positive voltage to brigh the leds
@@semihkralan5000 put +13v to the VIN TERMINAL, BECAUSE THE VIN IS BETWEEN 10V TO 30V
ON/OFF =ENABLE and DIM= ADJUST, if the ENABLE TERMINAL is not fix to a positive voltage the leds will not bright
FET heat more how control
Un vídeo sin ninguna explicación no sirve
I've seen this product, but I don't quite get it. Originally CCFL backlights run on 12V AC, but LEDs typically work on DC, so you couldn't just replace CCFLs with LEDs, they wouldn't work. I'm guessing that little board that comes with the strip is meant to create DC for the strip. But if it outputs DC for the LED strip, how come you're also soldering the input to 12V DC?
its a voltaje and current boost.
CCFL certainly does not run on 12V AC. It needs high voltage. The electronics creating that high voltage stay unused, when you replace CCFL by LED strip. The board for LED strip has input 10-25V DC, typically 12V DC. Output is a current source with about 12VDC, usually 3 white LEDs in series create one group in the strip.
@@mm0063 your answer is all wright ,better imposible, fine friend
Arçelik tv.baglsntısı Aynı mı?
Música alta do c@ralho!!!!
Not fit to make video, go to party and play gitar
Crappy video. 💩 🎸 🎉 🎈 🎊 🎸 💩.
Bc
Bad video record, bad music, bad music volume.
100 percent crap music. 100 percent crap video.
Konten gak guna gak di jelasin ngerti sendiri aja