Salve ho una sovol 7plus ho un problema con il livellamento nella parte destra il sensore va fuori del piatto e non lo legge, come posso risolvere ? È nuova ed è il primo utilizzo, ci sono dei PDF per vedere cosa controllare ? Non vedo sensori o blocchi fine corsa .
Come posso caricare foto ? Hi, I have a sovol 7plus, I have a problem with the leveling on the right side, the sensor goes outside the pan and doesn't read it, how can I solve it? It's new and it's the first use, are there any PDFs to see what to check? I don't see any sensors or limit switches. Now I have reset from the factory but from another problem a blocked fan noise and these errors even after restarting the firmware and klipper. When I install it no longer gives me the choice of UTC and if I continue I am left with the problem of noisy noise and hotend error. I can try with a translator but I can't do anything more
Ora ho resettato da fabbrica ma da un altro problema un rumore di ventola bloccata e questi errori anche dopo avere ripartito firmware e klipper. Quando installo non mi dà più la scelta dell' UTC e se vado avanti mi rimane il problema del rumoraccio ed errore hotend
I knew this was coming...my SV07 is a decent machine...It is limited by the poorly configured slicer that is packed with it. Why not make perfect profiles for existing slicers rather than spend time reskining cura and breaking it in the process.
I’d love to test one of these someday!
I hope it comes soon and runs well known slicers. Looking forward to the reviews. I need at least a 300 mm bed machine
300 build size it way to me! Finally!
Salve ho una sovol 7plus ho un problema con il livellamento nella parte destra il sensore va fuori del piatto e non lo legge, come posso risolvere ? È nuova ed è il primo utilizzo, ci sono dei PDF per vedere cosa controllare ? Non vedo sensori o blocchi fine corsa .
Come posso caricare foto ?
Hi, I have a sovol 7plus, I have a problem with the leveling on the right side, the sensor goes outside the pan and doesn't read it, how can I solve it? It's new and it's the first use, are there any PDFs to see what to check? I don't see any sensors or limit switches.
Now I have reset from the factory but from another problem a blocked fan noise and these errors even after restarting the firmware and klipper. When I install it no longer gives me the choice of UTC and if I continue I am left with the problem of noisy noise and hotend error.
I can try with a translator but I can't do anything more
Ora ho resettato da fabbrica ma da un altro problema un rumore di ventola bloccata e questi errori anche dopo avere ripartito firmware e klipper. Quando installo non mi dà più la scelta dell' UTC e se vado avanti mi rimane il problema del rumoraccio ed errore hotend
Huch schon wieder ein neuer Drucker🎉
Sapreste dirmi come collegare l'accelerometro ?
When will it be available to purchase in the US? it looks cool
I knew this was coming...my SV07 is a decent machine...It is limited by the poorly configured slicer that is packed with it. Why not make perfect profiles for existing slicers rather than spend time reskining cura and breaking it in the process.
Thankfully you can import the profiles into the latest version, I had to look up how but it's possible.
need to check your spelling on the call outs. Practical, not Pratical. Tripe is something completely different than Triple. system, not sytem.
English isn't there native language
@@alex59292 I understand that. I expect spell checking from any professional company targeting an English-speaking audience.
@@alex59292 is Chinese spelling
No auto bed level ? Then its useless😂
looks like it has a SPINDA V2 clone
...But it does have ABL
@@funx24X7 cool man.
The problem with these 3D printers is It's too easy to get it wrong and plus they move too slow.
No stainless steel rails again???