Это видео недоступно.
Сожалеем об этом.
WATCH THIS before breaking the new Gohan 3.0 S.H.Figuarts
HTML-код
- Опубликовано: 12 май 2024
- #gohan #actionfigure #shfiguarts #howtofix
Hey guys!!!!
Quick video today, showing how to avoid breaking the new Gohan 3.0 from the S.H.Figuarts line!!!
This video is for educational purposes only, I just want to help and I am not responsible for any damage, breakage of your figures, do it at your own risk.
My english is working in progress.
Social :
/ utw_reviews
/ utw_reviews
Doações ,donate : paypal.me/wutheus
I guessed I'm lucky cause my copy has smooth joints. I didn't need to put force when moving the legs but it's a good knowledge for any figure which has overly tight joints.
I always use this on figure joints if they to tight , or kiki fix if they loose
I would recommend oiling joints even when they seem fine cause they can tighten over time
@@Saiyan1229do I buy it from Amazon
This is exactly what I did when I got my second copy, plus I do this for all my figures
I always do this for stuck joints on figures , my cyclops marvel legends need some much more oil than gohan 😅
I came from reddit. Thanks for this and also your English is just fine
Thank you my friend i really want do more videos in English, but still feel i not ready 😅!!
@@UTW_reviews makes sense, good thing is practice will make you more comfortable and plus it'll be something that you can do many times since you can edit the video after you are happy with the results.
@@erickzuluaga677 Thanks for the words, will be looking forward to do it more videos in english soon 🙏🙏
Thanks man I been hearing about the leg breaking but this video reassured that I can fix it if mine comes in like that
Is more like a preventative , i really recommend you do this , is cheap and better than take the risk of losing this amazing fella!!
Nice video bro 🎉
Thanks so much bro 🙏
Thank you for this!! My Gohan arrives tomorrow : )
You welcome, very nice figure 👌
Salveee , Let’s go 😁🔥
😀 Thank you maninho🔥🖤
I usually put it in hot water, then move the joints around while it is hot.
Once the plastic is cold the effect of hot water will be gone
I’ve put silicone oil on figures before but I ended up giving some a permanent residue that would get on my fingers. Did this end up giving you the same problem? I didn’t apply it the way you did so maybe I just need to give it another shot and try again
@@cburchfitness I going to check mine , pretty sure is fine , try a cotton swab with warm water ,maybe that clean off the residue!!
I saw there is this and something else that is like necessary for owning action figures? I think one for joint loose the other I forgot
Yes KiKi fix loose joints!!! i use this to fix the 3.0 trunks first release .
are the legs usually very loose or they very tight?
Silicone oil is used when the joints are tight.
they normally to tight , i always use oil on any tight joints in figures so i recommend this to any figure !!!
Isn't it better to remove the leg and apply the oil direct to the socket?
@@car7000 You can do it either way , i just did like this to avoid breaking the legs, they are fragile
man I'm glad this showed up in my recommended before I got gohan, I definitely would've broken him by accident
THANK YOU
No worries my friend, i am happy to help 🙏
Can You Just Sand The Joints On The Figure
you can , but you need take the legs off that’s risk to break ,but you can definitely do that !!
Is this fix permanent? Will I have to apply more silicone oil later?
Yes it is, you only need apply again if you wash your figure or if your figure get wet.
@@UTW_reviews thank you
Can you use dish soap to fix this?
I dont think is a good ideia ,this could damaged your figure with time could make worst
whats the product called and where do you get it from
100% silicone oil from , you can find from ebay !!
@@UTW_reviewsthanks
@@UTW_reviewswill WD-40 silicone work?
@@johns3153 not sure , if is not 100% silicone oil could damage the figure
Why is this a necessity on a 50$ fig? Can figurarts not fix this themselves?
Figuarts dont are the best of quality control some times
we should not need to do anything to a brand new figure , this one retail at 60$ i think , is a shame for bandai , i did the video to help people that already purchased the figure and don’t want break, but i totally agree with you
@@UTW_reviews agree.. it's sad that people have to RUclips how to fix their figures that cost like 100-150 usd
@@ssbbc2561 I really hope Bandai FIX they quality control !!!
Can I use dish soap? Cause on a TikTok a guy used it for his figure
I don’t recommend, to many chemicals can be harmful for the plastic 100% silicone oil is perfect and safe
@@UTW_reviews ok thanks
@@UTW_reviews does the figure get loose on his legs or no?
@@ccZtf78 my figure is perfect not loose at all
@@UTW_reviews thanks I ordered for pick up today
Vi hoje que o novo gohan estava com muitos qc issues na perna, quase todos os gohan tinham qc issue lá. Vou cancelar a pre reserva e esperar o reissue!
pior que esse é só a parte da cintura feita de borracha prendendo a articulação, bandai deveria ter botado um óleo de fabrica, quando desmontei o goku lendário pra repintar, percebi que tinha óleo nas articulações, deveriam ter feito no Gohan uma coisa simples que estraga tudo !!!!
Oxi
Would dish soap work
I don’t think is a good idea can make worse after dry or damage the figure .
@@UTW_reviews ok thank you would u know were to find the right thing to use
@@214collexts Ebay always have , i got my silicone oil from a airsoft website !!
@@214collexts Is cheap and you don’t need to much , you can use on other figures if they have stuck joints!!!
Hi I tried to by the oil from your video on eBay but instead what I got was gun lube. Will that also work or should I get a refund.
3.0 is garbage more like Trash 🗑