@@LawrenceSeetoh doesn't really matter, when he bought it for like 7k if i remember, and was trying to sell it for 11?? Been a while, sammit helps him sell his mistakes and keeps the prices a secret in the vids
When you removed the silencer I went from "mh okay" to "OH MY F* GOD IT'S SO GOOD" Thanks Sam I love FCs and this one is a gem. Truly deserves to be taken care of
This reminds me of Kalvin Malli's GT-R that had "minimal rust". He is doing a full frame-off rebuild on that car. Its been 3 years now and he is still putting it all back together.
Sam should get a wrap of a hello kitty with devil horns and a pitchfork on the side with hell kitty written in flames. That shit would be funny as hell but, also awesome
Good luck trying to get Spoon or anyone near his caliber of tackling this as a restoration. Best bet is someone has a good roller looking for a rotary drive train.
Chassis swap is the way to go or part it out. The Auto chassis’s trans mount is slightly different. Would need to make a mount or you can buy one so keep that in mind.
The sound and the bangs Hell kitty now makes is funny because its so ironic! i think it will suprise many like it did to me xd Love the progress Sammit, excited for the finish product!
shieeet... that FC sounds so good.... chassis swap it is... Sam.. you helped daiki with his engine problem... now you can do the same thing to Enzo but with the chassis now...
Sammit, try welding stainless instead of Tig with Mig using Argon mix gas till you get used more to it. Mig is a lot easier to weld as someone who don’t do that very often.
Hi Sam, the wagon r looks a blast. Don't wanna sound negative, but I think you should extend the exhaust out the side. Couldn't help notice the fumes in the shop after revving it up. A young couple died near us from an exhaust leak, they were parked up with the heater running and it choked them out. Don't wanna buzz kill your build though. Still enjoying the channel after all these years and always recommend your channel to people. ✌🏻
Sammit congrats again know you wanted a Supra a long time and finally achieved it can't wait to see your plans/build with it and cruising with your dad great work 👍
When he said the chassis is clean I laughed and then Sam spotted the rust I laughed even more, if an FC has rust on the body the chassis are always shot, thought everyone knew that, that's why there's so few of them left on the road.
Does anybody know the best piston rings for a stock piston on a ka24de. I have purchased an evergreen kit as well as an npr kit. Both of which showed up with ring gap wayyy out of spec.
Thanks for the forecast! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
Poor Enzo. That FC is a parts car at this point. The engine, tranny, and interior and the only bits worth keeping or selling. Pleas SAMMIT go with Enzo on his next car purchase adventure. 🤣😂
Erf, yeah, you gotta chaperone your friend, there, Sam. I managed to goggle past some rot on a car I bought once, ...it happens, but this is already a pattern for our man here. :)
FC doing fc things!! have you looked in the spare wheel well? I have had a few T2's and if you are seeing holes in the upper shell then you can put money on the fact it has no sills or spare wheel well in it.
0:15 I just what to say don’t be worried about posting that kind of stuff I. kind of relate to it as I didn’t get the time to do something like that with my dad so do what ever your can to spend as much time with him to get more memories to remember him happy My dad passed 1 year ago when I was 16 so I can understand the situation as I was supposed to restore my 1966 Land Rover with him but that never happened so do something like that with him and put as much memories in to that supra so when ever you look at that car you see him in the seat smiling❤
bro, dont let this dude go car shopping by himself jfc
yup i just wanna to say.
@@justcallmeRhys Wanted.
Agree not to disagree 😅🎉😂
He was't scammed, he was just very careless, even after being burnt by the FD, also nice work on the WagonRoar. It sounds so good now
Careless at the same time preying on others for his downfall, he was trying to resell the FD for near double he paid for
@@_Anthony___ woah, that's not great. Did he declare upfront that the frame was damaged?
@@LawrenceSeetoh doesn't really matter, when he bought it for like 7k if i remember, and was trying to sell it for 11?? Been a while, sammit helps him sell his mistakes and keeps the prices a secret in the vids
Someone will want to save the shell or the complete car, what Sam says find 1 with a blown engine, as a car lover its heartbreaking to see.
@@_Anthony___ that's not good of him. I hope it didn't sell for that price
Your boy is a magnet for bad car deals 😂😂😂
This title had me completely scared that the Supra had gone wrong! Little Bowow...good luck...truthfully good luck...
Just find an FC shell with no interior for a couple thousand and chassis swap.
you say that like its easy lol
rust free fc's are far from common and very rarely do they come as a no interior shell
15 years ago sure
today no
@@mrkouki180sx I agree if i were him i'd use it as a missile given the rust circimstances but fc's are amazing i dont blame him for buying it lmaooo
how about you find one for him then lol
Bro that frame is cooked
I guess he's going to have to wait until Alibaba starts selling new shells, lol
No surprise there
How u so fast
You can't call that a scam, if you didn't really look at it when he bought it. He woulda saw the huge holes and run of there !!
When you removed the silencer I went from "mh okay" to "OH MY F* GOD IT'S SO GOOD"
Thanks Sam I love FCs and this one is a gem. Truly deserves to be taken care of
err idk u saw the holes?
a shit gem you mean
Not sure if it's a gem hahahaha
@@mclarensmps it's like a Chinese gem. Junk lol
Every one imported to Canada has issues already….
If he checked it, before bidding.... He isn't scammed, he is just a fool
Bro not needed at all
He got excited....not knowing what beneath that metal sheets....🎉😢
@@logichades7731go cry a river...heeza fool
The hell kitten has no business sounding that good 😂
They call that "good from far, but far from good"
At least here in France we say that: belle de loin mais, loin d'être belle!
The amount of rust on the car in the engine bay was a big indicator that there maybe other problems. Definitely would have asked to see it on a lift.
I wouldn't even trust the frame rails to lift the car 😅
@ well now that we've seen it, definitely not!!! 😂😂😂
Seeing the engine bay I would have walked away.
even a female knows
28:53 ...BROOOOOO!!!! 🤣
This reminds me of Kalvin Malli's GT-R that had "minimal rust". He is doing a full frame-off rebuild on that car. Its been 3 years now and he is still putting it all back together.
Frame off? On a monocoque?
16:46 looks like somone got hungry and took a bite out the wheel fenders 😂😂
Sam should get a wrap of a hello kitty with devil horns and a pitchfork on the side with hell kitty written in flames. That shit would be funny as hell but, also awesome
Good luck trying to get Spoon or anyone near his caliber of tackling this as a restoration. Best bet is someone has a good roller looking for a rotary drive train.
Just buy a clean FC chassis with a bad engine or something and swap everything over to it. It'd be less work than fixing this one
Running a car in Japan with no cats has a fine of $5,000. Sounds good though
Should've walked around it and said carbon fiber, while pointing to the rust 😅
The WagonRRRRRR with a 13b in it. 😂
Enzo Takahashi over here
This would make a perfect donor car, just find a clean chassis and you’re GOLDEN, please it would be a cool build series
You got my vote. I want to see you pull that engine and swap it.
A rich kid spending his allowance from daddy
WTH...that gaping hole, brooooo!! No diddy, thoooo 😂😂😂😂
Oh dear Enzo 😂🤣😂🤣💀💀
Chassis swap is the way to go or part it out. The Auto chassis’s trans mount is slightly different. Would need to make a mount or you can buy one so keep that in mind.
The sound and the bangs Hell kitty now makes is funny because its so ironic! i think it will suprise many like it did to me xd Love the progress Sammit, excited for the finish product!
"The Hell Kitty" LMAO
shieeet... that FC sounds so good....
chassis swap it is...
Sam.. you helped daiki with his engine problem... now you can do the same thing to Enzo but with the chassis now...
Sammit, try welding stainless instead of Tig with Mig using Argon mix gas till you get used more to it. Mig is a lot easier to weld as someone who don’t do that very often.
As a welder of 25 years....don't do that. Nothing wrong with his stainless Tig it will just get better with practice
Hi Sam, the wagon r looks a blast. Don't wanna sound negative, but I think you should extend the exhaust out the side. Couldn't help notice the fumes in the shop after revving it up. A young couple died near us from an exhaust leak, they were parked up with the heater running and it choked them out. Don't wanna buzz kill your build though. Still enjoying the channel after all these years and always recommend your channel to people. ✌🏻
Sammit congrats again know you wanted a Supra a long time and finally achieved it can't wait to see your plans/build with it and cruising with your dad great work 👍
I remember the FC that Sammit would always walk buy at his old shop.
Please find him a clean FC shell! Do a weekend live stream swapping the drive train would be awesome
The hell kitty has no business sounding that mean. hahah damn!
I'm surprised Chris didn't. Being a bag of Takis dropping the moped off😂
Run the air filter into the cab, big, big plenum chamber! Then, lightly pressurise the cab via side scoops... Rrrr
Those exhaust bangs remind me how rhe impressive the bogan build was. Amazing work guys, keep it up !
Sam should do a project car with Enzo, It would be a cool series to watch.
Friends don't let friends drive with silencers
When he said the chassis is clean I laughed and then Sam spotted the rust I laughed even more, if an FC has rust on the body the chassis are always shot, thought everyone knew that, that's why there's so few of them left on the road.
Oh Hell Nyaa baby!!!! 😂
Btw Sam, use Daihatsu Mira Avy throttle cable.
Man cant wait to see sammit be one of the top drivers in fd japan should get into some time attack as well sammit boy
Everyone send may takis to his P.O box lol
add anouther air scoop on the hood over the air intake. double air scoop!!
It’s great to see you’ve become a mechanic and a baby fabricator
The instant I read the title nearly had a heart attack... I thought it was something to do with the Supra!
Well… he’s consistent in his dodgy auction purchases I guess?
Frickin mint bud! Just a little surface rust! 🙌
Dude the fact that Sam has Bunnings buckets in Japan is crazy! 😅🙌🏽
At the garage for 30 min and already a beauty summit upgrade
Wow the van is a Crazy kitty. 🤣✌️🇦🇺
@28:00 I like to call that feature “structural carpet.”
Just find a good shell with no or blown motor
That Susuki van is sweeeet.
Put the air filter on the van into the windshield cowel like the ep3 intakes etc
Wondering why the Hell Kitty was so loud😂 then you showed that bozo exhaust 😍 FKN MINT 👌😘
That HellKitty is cool as hell.
yes rotary content!!!! would love that
You should collab working on the rx7 would be intresting to see
Brilliant video sam please go with enzo next time he buys a car love the content keep it up
Sweet fc, always wanted one, she deserves a chasis swap or in depth rust repair
Why not put an electronic throttle body? Eliminates the cable problem and the whole bypass valve. You can just tune the ALS on the throttle body.
rotarys love big a big battery bro, CCA helps especially when they get lower on comp.
them starters working overtime 🤣
Is there a way you could relocate the battery to then move the intake to a better place? Awesome little K-car 😂❤. Can’t wait for the supra content 👍😎
Put a bigger scoop on bonnet for airflow to filter.
OMG the hellkitty sounds so much sicker and better then the wagon yah. I never knew it could sound that good
4:39 couldn’t you use a drive by wire intake…program it into the link ECU? Added effort but then could setup no lift shifts and other fun stuff…
20:11 “money” using some old school term! Been saying that for 25 years or more
Does anybody know the best piston rings for a stock piston on a ka24de. I have purchased an evergreen kit as well as an npr kit. Both of which showed up with ring gap wayyy out of spec.
Thanks for the forecast! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
The auto fc shells 31:01 are different
isnt this the second time, he got scammed?
Poor Enzo. That FC is a parts car at this point. The engine, tranny, and interior and the only bits worth keeping or selling. Pleas SAMMIT go with Enzo on his next car purchase adventure. 🤣😂
Dont be too hard on yourself it happens here in the US as well. The hell-kitty sounds damn good
That kei truck sounds gnarly af 👀
Bunch of cool old parts, definitely be awesome parts car for a clean chassis
Dude!! tell him to send me the hood when he scraps It! And the steering rack!
Great video Sam!!! Enzo really needs to make sure he face times you when hes buying cars 😂😂😂 the engine swap idea is brilliant!!
You might could go to a larger fuel line after the filter on the Hell Kitty to carry a higher volume of gas.
Let's goooo rotary content!! I hope there will be a nice shell for my man to buy.
where was that takis info for ruddy when he had to ask may for the moped
😂 that was my first thought as well
Sammit: it's not that bad, at least its localized.
You've spent like over a year repairing the rust damage on your s15 😭
Erf, yeah, you gotta chaperone your friend, there, Sam. I managed to goggle past some rot on a car I bought once, ...it happens, but this is already a pattern for our man here. :)
FC doing fc things!! have you looked in the spare wheel well? I have had a few T2's and if you are seeing holes in the upper shell then you can put money on the fact it has no sills or spare wheel well in it.
Love all Ur stuff man so wish you keept the evo can not waet to see the Finished s15 r you going to keep it Blue ????
Good from far, but far from good. XD
That fc is mint. A lil cut and welding she’ll be good as new
Reparable... but it's be way cheaper to buy a spotless one.
0:15 I just what to say don’t be worried about posting that kind of stuff I. kind of relate to it as I didn’t get the time to do something like that with my dad so do what ever your can to spend as much time with him to get more memories to remember him happy
My dad passed 1 year ago when I was 16 so I can understand the situation as I was supposed to restore my 1966 Land Rover with him but that never happened so do something like that with him and put as much memories in to that supra so when ever you look at that car you see him in the seat smiling❤
Sammit - I inspect cars for a living in Japan. Let me help you omg lol
and dont forget the scooter 😉😂
Why doesnt he take you you with him to talk him out of these impulse buys 😂
Rotary content, I am here waiting
oh no hes pulling at your heart strings
enzo is 3 for 3 thats actually impressive 😂😂😂😂
Luv the angry kitty