Real fix(from experience) Step 1: Get pin Step 2: Use pin as a lever to dig the peg out Step 3: Get peg from old broken fig or buy a replacement peg Step 4: Enter new peg Step 5: Your figure gets to live another day :)
Super glue is certainly… a fix but if you have it you can swap the neck from the Super Saiyan Full Power Son Goku figure as it’s skin tone and neck peg are the exact same. Another fix is buying third party replacement joints. They make these for not only Figuarts figures but nenderoids, figmas. Super glue, for me, is a last resort fix.
The little steel wires that come with the bread bags you buy on any store work Just take out the peg, and fold the little wire until it is both long enough and thick to get sticked in the neck Yeah, it may not look good, but it is almost unbreakable and gives unlimited movement Same for hand pegs
he has his neck joint it’s a little less mobility when it comes to him looking around but he can still look up down to the right and left just a little less articulation
Another way to fix is by getting a heat gun or really anything that makes heat and then use that on the figure put it near the neck that will soften the plastic on the neck then you some force to pop out the neck peg and buy a new one and you might have to paint it because most of the places you get it from will have it gray so if you don’t care just pop it back on and then put the figure in some cold water to harden the plastic back and pop back on the head and bam you done
Im having a problem the my Dl custom Beast Gohan head sculpt keeps falling. Like the head plate and the front hair is falling off and Dosent stay in place! Help please!
I Had this Issue with My Goku's Leg But I Was lucky to find Another one in target so I just customized My Broken Goku With Kaioken Blue Like hair He's Legs Still Works But falls off and Is very loose
Well Goku has achieved the Super Saiyan Glue transformation a dream come true What does it make special? You're unable to move your head & you don't have to sniff glue to get high you have it inside you permanently 😂
WTF?! YOU SHOULD'VE put Goku to soak in lukewarm water for a minute, both head and body. Use tweezers to pull the ball part from the joint that was in the hair and remove the other part stuck in the neck, then use the glue to glue the joint and the ball, this way you would only lose the movement of lowering your head, but the head would be free for swapping BUT the best choice is to just buy a new joint
You know what I did I had a ultra instinct goku sh figure arts the peg for his head broke but i had a base form goku so I took out the peg to his head then put it on ultra instinct Goku body and ultra instinct goku was good as new
Real fix(from experience)
Step 1: Get pin
Step 2: Use pin as a lever to dig the peg out
Step 3: Get peg from old broken fig or buy a replacement peg
Step 4: Enter new peg
Step 5: Your figure gets to live another day :)
Thank you
Thanks
I ain’t reading allat ?!??!?!
@@aspect2399 it ain't that much 💀
Thank you
That's.... That's not how you fix that-
it works, just no neck movement
Cap
@@spicygames4370 technically nah fixing it would be buying a whole new ball joint completely and switching them out
No they fixed the peg and it’s in a ball joint so it can move
Yes
It is not
Super glue is certainly… a fix but if you have it you can swap the neck from the Super Saiyan Full Power Son Goku figure as it’s skin tone and neck peg are the exact same. Another fix is buying third party replacement joints. They make these for not only Figuarts figures but nenderoids, figmas. Super glue, for me, is a last resort fix.
Now you cant move his head
U could have bought a peg replacement instead
Bruh does he wants to waist his money
Where can you buy peg replacements?
@@littlethunder6524 peg replacements aren’t that expensive
@@littlethunder6524 there like 5$ for like 10 or more and there very good quality depending were you huy
@@littlethunder6524 its not wasting when its 6 dollars for like 13 of em
The little steel wires that come with the bread bags you buy on any store work
Just take out the peg, and fold the little wire until it is both long enough and thick to get sticked in the neck
Yeah, it may not look good, but it is almost unbreakable and gives unlimited movement
Same for hand pegs
The problem: can’t move his head anymore
True😔
@@kysworld0 buy peg replacement for like 15$ or mabey at most 20$
he has his neck joint it’s a little less mobility when it comes to him looking around but he can still look up down to the right and left just a little less articulation
Best way is get another broke figure or a figure you don’t use and take a hand peg Less chance of snapping
Yea that suck I have optimums prime and he broke his foot
Now I bet it will be extra great when you do headswaps
I swear. ON MY LIFE they need to make a metal neck ball joint
mom skills
You are losing articulation
Behold the kragle!!!!
Thank you for helping me and my mom now my Action figure is good
Another way to fix is by getting a heat gun or really anything that makes heat and then use that on the figure put it near the neck that will soften the plastic on the neck then you some force to pop out the neck peg and buy a new one and you might have to paint it because most of the places you get it from will have it gray so if you don’t care just pop it back on and then put the figure in some cold water to harden the plastic back and pop back on the head and bam you done
this is perfect for figures that dont move but for action figures, once you super glued his head you wont be able to move again
I did the same thing with my super sayain blue but I couldn’t move the head and then he broke again-💀
I messed up pretty bad😂❤
I like your content never stop
That same thing happend to me on the sayain rasied on earth goku and I was devastated but I fixed it with the help of this video
All right that did happen to me once but you know what I did I changed the peg with an older figure that I don't play with
Thank you
Same mines broke but I put super glue and I'ma wait till tmrw
Hot water and a thumbtack loosen and remove the joint then glue it together
I want one too
You have the same action figure as me and mine broke but right before I watched this vid me and my mom were talking about super gluing it
That’ll work!👍🏼
This happened to my superhero goku
Rip also I feel the head snapped 1000 times
The same thing happened to my saying raised on earth five times😢
Im having a problem the my Dl custom Beast Gohan head sculpt keeps falling. Like the head plate and the front hair is falling off and Dosent stay in place! Help please!
R.I.P
Thanks
Wow, what were you thinking? 😂
When you don’t know that’s wat happen
@@kysworld0 it’s okay bro, we all have those moments. 😅
Peg replacements are an option or just get a brand new one all together
Thanks for tips❤
Awesome Figure man I have that Super Saiyan Blue Goku Figure from The Dragon Ball Super Broly Movie
I Had this Issue with My Goku's Leg But I Was lucky to find Another one in target so I just customized My Broken Goku With Kaioken Blue Like hair He's Legs Still Works But falls off and Is very loose
Try some tape on the ball joints for the legs
Can you swap the faces even though you super glue it?
✊️✊️✊🏿✊🏿✊🏿✊🏿✊🏿✊🏿✊🏿
Other people be like shopping for a new peg: 7 DAYS!?
Kys be like: just use super glue !
i need this video my base form goku peg broke
R.I.p
He should’ve taken out the peg and then do it so he can still move it
Same my broke today, I put super glue. I don't want to wait for a neck peg
Friza:hello monkey
How do you make your figures?
That happened to my dragon ball evolve ssjb goku
Honestly it’s better to get joint form gunplan remove it from shf , those neck joints are terrible
Thx for the tip bro my holy black broke and now it’s fixed
Where do you buy them from
How easily do these figures break
Fun fact: I’m pretty sure that’s the last time you’ve seen the figure in his channel
RIP 🪦 🕊😪
Where did get Goku blue and how much was it
Target and 32 something dollars
I got it when it first came out. Idk about now but in 2019 it was $35.
I found another solution
Use another Goku since bandai putting out Goku’s like fighterz, since just make the head as an accessory for all gokus
Whats the name of the song in the background
I hope my Goku doesn’t break 😨
Well Goku has achieved the Super Saiyan Glue transformation a dream come true
What does it make special?
You're unable to move your head & you don't have to sniff glue to get high you have it inside you permanently 😂
How did you even manage to break the neck 😂
Where do j buy them in wales
How are you going to move the head?
Well that happened to my goku figure and a old goku I don’t use I switched the necks
How you make our own jagged ball z toy?I got dragon ball z toy and I want to make it as my
WTF?! YOU SHOULD'VE
put Goku to soak in lukewarm water for a minute, both head and body. Use tweezers to pull the ball part from the joint that was in the hair and remove the other part stuck in the neck, then use the glue to glue the joint and the ball, this way you would only lose the movement of lowering your head, but the head would be free for swapping
BUT the best choice is to just buy a new joint
Rip ssjbule
I shared
But how can you turn the head?
Why didn’t you just reheat? The broken peg and switch it out for another peg.
If you put glue on why would you mess with it at the end
What do u do when u wanna turn his head?
My peg also broke and I glued it back
Yes it is
I did that because I had it in my suitcase and then that piece fell off and I had to replace my Goku blocks head
What if u want to change the head
Sooooooooooo nice🤘🤘🤘🤘💯👿
What’s the name of the figure?
So is that holy or gogeta
Mine did the same thing my goku blue’s peg broke off
Rip but hey he way better now
rip ssjb goku
Head movement?
GREAT!
now make his head move forward and backward
You know what I did I had a ultra instinct goku sh figure arts the peg for his head broke but i had a base form goku so I took out the peg to his head then put it on ultra instinct Goku body and ultra instinct goku was good as new
With the same ssjb goku
That happend to me-
Heres a tip ... Gorilla epoxy glue .
Bro the same thing broke on my figure too💀💀
Might go to action figure Peg broke off 2 what do I do please help ️
Cool video ky's world can I get pinned please i am you're biggest fan 😊
1 share fee goku ✊✊🏻✊🏼✊🏽✊🏾✊🏿
This happend with my ui goku
KY it happened to me too😭
My goku black broke 😭😭😭
Mine too his neck broke
,✊🏻✊🏼✊🏽✊🏾✊🏿
Bro what about if a leg breaks bc mine broke its leg
I have a super Saiyan same one and same thing happened
Ye I did the exact same for my goku black figure his head snapped off
I only have MUI sadly I have no Ssj,ssj2,ssj3,ssj4,ssg,ssgss, ñor ui not even kaioken or base
Ky bro that happend to me and the screaming face is stuck their