Fantastic! You guys really nailed the details on your mods for the MT-09. I'm taking possession of a 2023 MT-09 next week. I'll definitely be contacting you all for some mods and upgrades in the very near future.
@@tigeurrilla Yes, our light is as bright, if not brighter, that the OEM unit. This light is also fully programmable as mentioned in this video and various brake and signal settings can be set with a simple press of the button on the back.
I'm so glad you are enjoying your TST tail light. Our entire team puts in a great amount of effort into these products. It is very fulfilling to see customer satisfaction with our products.
We have designed and prototypes the components that make the dedicated MT10 tail light. Currently we are designing the molds that will be manufacturing the lens and ducts . After that we will cut the mold plates and all the other mold components. There is no way to tell exactly when we will have units for sale but we are shooting for early this summer
Got it done this morning. Took a bit longer than I was hoping, had to work around the fender eliminator the previous owner had installed on it. This is truly good awesome kit!
Not at this time. It's a little trickier on these newer Yamaha models as the signal circuit is controlled entirely in the LCU and adding more than one full set of lights throws off the controller and causes your signals to no longer flash.
@@Average_D lately we do not give launch dates until the parts are made and ready to go. There are still a few things that can trip up a timeline so there is no way to 100% commit to a date. Here is a hint though...the molds are ready, texturized, and have been tested in test production. I have several assemblies that look the biz and already approved the tooling for production. Now it is just a matter of getting a slot in production for these sub-components and then assemble them into the final product. It won't be long now before they are available on our website.
Now, we need integrated turn signals in head light. Maybe there is a possibility to modify those vertical day lights in the front and integrate turn signal there ?
No, this particular bike has an electronic flash controller built into other electronics and cannot be replaced. Our tail light is made in a way that doesn't trip that circuit up and needs no further help with flash control.
hey i am thinking of buying this taillight but 1 guestion. every time you gonna brake does the brakelight pulse ? and not like brightin the running light when brake?
The tail light is programmable so you can have standard function, or choose one of the other functions that have light patterns for brake and signal function. I did not understand the second part of your question.
This may vary from bike to bike. Those seats are built on a PP or PE base (don't remember the material right now). Both of these materials are pretty flexible. At the factory they staple the exterior material to the base. If they stretch it on a bit more tight while stapling, the seat can bow upwards. That can cause the larger gap. This is me just speculating. Several of the bikes we worked with looked to have a similar enough gap that we did not notice a difference.
Typically once we launch, the parts are available for the lifecycle of the motorcycle they are for. This time we sold out of the first batch really quick, and had difficulty pushing next batch through production fast enough. Rest assured that more are being produced. It won't be long now before we have more up for sale.
This tail light does fit directly on the 10. I have personally modified two to be able to be mounted on that bike, and subsequently installed them. The gaps around the lens are not equal around the perimeter of the tail to taillight mating area. The side and top tail bodywork does not clip into the tail light. We will likely develop an MT10 specific light, but it will take some time.
Hey there, coming from Germany and like yall know- pretty much paperwork for simple changes on your bike are needed here. Do these tail lights come with any kind of papers which show that these are legal here in Germany or sadly not?
Some of the components are shared between the MT09 and MT10 tail lights. I need to redesign only a few of the components, and then build the molds for them so we can mass produce. I need a bike to hang out here atthe shop for a week or two so I can carry out the design changes, prototyping and fitting. I have not secured this bike yet so I cannot tell you that the work has started, but I can tell you that I intend to do this.
Many people were able to buy one, then we ran out of the initial quantity. More are being assembled. The next batch should be bigger than the first. The third batch should be even bigger. We will reach steady state before the next busy season.
@@The9Jake if you sign up for the email notifications you will be notified the moment they are back in stock. We’re hoping that can happen in the coming weeks as our lights finalize the extensive QC process we put them through.
There is a 2023 model here waiting for us to do some work on. I know that we are developing an ECU flash already. Then we are kicking out an ABS model specific high performance intake system. And the sequential Nexus with running light. I know some of these will need a video. I also saw a scheduled video on the topic of our race development division (WorX) and the parts that were developed for the N400 platform in 2022.
@@skaartheknight5670 yeah, kinda surprised they weren't ready for this, people have been waiting quite a long time, maybe should have waited a little longer for a release date 🤷🏼
Fantastic! You guys really nailed the details on your mods for the MT-09. I'm taking possession of a 2023 MT-09 next week. I'll definitely be contacting you all for some mods and upgrades in the very near future.
Great to hear that. Looking forward to another makeover.
It's weird to see this in stock finally 👍🏾
Excellent installation instructions! Taillight design looks great!! Thank you.
Awesome! You're welcome. Thank you for sharing ypur experience.
Got mine delivered today and threw it on straight away. Needless to say I’m glad I didn’t cave and buy a cheap Ali express one. Tst have nailed it!
Thank you. Glad you like it so much. Cheers!
Is it as bright as the oem? & is there a way to program regular brake light? I hate that flashing when they're initiated
@@tigeurrilla Yes, our light is as bright, if not brighter, that the OEM unit. This light is also fully programmable as mentioned in this video and various brake and signal settings can be set with a simple press of the button on the back.
Just got mine in the mail today, great job guys it was well worth the wait!!!
I'm so glad you are enjoying your TST tail light. Our entire team puts in a great amount of effort into these products. It is very fulfilling to see customer satisfaction with our products.
Haven't purchased your product (yet) waiting on the '22 MT-10 release, I'll be one of the first in line. Impressive video!!
We have designed and prototypes the components that make the dedicated MT10 tail light. Currently we are designing the molds that will be manufacturing the lens and ducts . After that we will cut the mold plates and all the other mold components. There is no way to tell exactly when we will have units for sale but we are shooting for early this summer
Just got mine today. Installation was a breeze. Works flawlessly !!
Awesome
What a masterpiece this integrated taillight. Can’t wait to install it on my mt09
Thank you for the kind words. I am excited to hear your feedback on the part and also the video instructions.
Me encantaaa!! Lo fui a comprar alas 11am hoy en Puerto Rico y ya se avia acabado :( esperando la otra ronda
Just installed mine Thursday, easy install video, thanks for the amazing product 👍🏾
That's great to hear...you're welcome. Sounds like you're off to a good start to the season.
Yamaha tracer 9 owners need something like this, please
Hi great product, any idea when you’ll be doing one for the new 2024+ model, as would be awesome paired with the low mount number plate.
That's a project that we are actively working on but there is no ETA for release at this time.
How sick would be if you redesigned front headlight😈
Got mine ordered! Can’t wait to get it installed🤘🏻
Nice!
Got it done this morning. Took a bit longer than I was hoping, had to work around the fender eliminator the previous owner had installed on it.
This is truly good awesome kit!
That's music to my ears. Glad to know you are enjoying our parts.
Any chance a splitter harness will be/ is available to run your aftermarket sets of signals along with the new taillight?
Not at this time. It's a little trickier on these newer Yamaha models as the signal circuit is controlled entirely in the LCU and adding more than one full set of lights throws off the controller and causes your signals to no longer flash.
@@TSTindustriesyou guys are top notch.TY!
Had the same question :/ I still bought it for the looks, it's wicked!
@TSTindustries any idea on when that streamlined undertail section will be available?
@@Average_D lately we do not give launch dates until the parts are made and ready to go. There are still a few things that can trip up a timeline so there is no way to 100% commit to a date. Here is a hint though...the molds are ready, texturized, and have been tested in test production. I have several assemblies that look the biz and already approved the tooling for production. Now it is just a matter of getting a slot in production for these sub-components and then assemble them into the final product. It won't be long now before they are available on our website.
All of your products are awesome.
Thanks for the feedback and support!
Is there any plans to make a xsr900 version?
Not immediately at this time but we're monitoring sales of our current XSR products to see if the demand is there.
Hi,some link for Europe buyers,seems it was avail in UK but wright now is out of stock.
Any eta on the smooth undertail section? Don't see it on your website
Be sure to tune in to our live stream event next Tuesday at 3pm EST for some updated information regarding the MT-09.
How did you take out the old turn signals, is there a video about that?
It is shown and explained in our fender eliminator video for this bike.
Now, we need integrated turn signals in head light. Maybe there is a possibility to modify those vertical day lights in the front and integrate turn signal there ?
That's actually a project we toyed around with a bit here. It is possible.
@@TSTindustrieswell than, I'm waiting patiently 🙂
Do we need the flasher relay gen 2 for these?
No, this particular bike has an electronic flash controller built into other electronics and cannot be replaced. Our tail light is made in a way that doesn't trip that circuit up and needs no further help with flash control.
Do we need atest for make it street legal in europe?
Any word on when this will be open to pre-order for the MT-10?
Not ETA on availability just yet and we normally don't do preorders.
hey i am thinking of buying this taillight but 1 guestion. every time you gonna brake does the brakelight pulse ? and not like brightin the running light when brake?
The tail light is programmable so you can have standard function, or choose one of the other functions that have light patterns for brake and signal function. I did not understand the second part of your question.
@@TSTindustries okay thanks for feedback i saw the aounther video that explain the features of the tail light and have ordrered one now:)
How did you get the seat to light gap so tight mine has big gap
This may vary from bike to bike. Those seats are built on a PP or PE base (don't remember the material right now). Both of these materials are pretty flexible. At the factory they staple the exterior material to the base. If they stretch it on a bit more tight while stapling, the seat can bow upwards. That can cause the larger gap. This is me just speculating. Several of the bikes we worked with looked to have a similar enough gap that we did not notice a difference.
Hi, I've ordered my light, just one question we can't have flashing brake lights in the UK, so can you switch it off and just have on or off
Yes, that light is fully programmable.
ruclips.net/video/o-XEvWhVNho/видео.html
@TSTindustries Thank you so much for your fast response, mega light and I'm just going to fit it
Ordered and excited!!
I'm excited for you, and also to hear your comments after you receive and install iit.
I wonder how bright this is on day light!? Can you show me a video with this integrated tail light on day light ?
You can check out this video from a good friend of ours. He has some clips of riding in the daytime.
ruclips.net/video/uUEreyp3s_k/видео.html
Can’t wait to get mine in the mail
I can't wait to hear what you have to say after you install it and get to see it on your bike.
I wanna buy these, are they legal to ride with, without the normal stock indicators? I live in Sweden. I'm guessing they are.
You would have to check your local laws and requirements to see if they are legal in your area.
Do you plan on developing something similar for the 2022+ xsr900?
If the demand calls for it we may entertain the idea of designing a tail light for the new XSR.
@@TSTindustries I know I would be extremely interested, honestly I’d probably be willing to preorder one, I hope others voice interest in it.
looks awesome, i need to get this for my newly ordered MT 09 SP. is there a store or way to ship to Belgium? would love to have this
We ship to Belgium from our website or you can view the Dealers tab on our website to view our dealer list.
this works on europe versions of mt09?
@@HrvojeDragičević-x9r this works on the europe version, i have it installed on my MT09
Just bought the tst hyperpack for this bike because the front signals constantly fell out and the rubber boot finally broke, got tired of it lol
I hope to hear your impressions after you get your parts and install them.
Is that one peice under tail available? I don't see it on your website.
More info on that coming soon but just know, it will be released!
Tracer 9 GT 2022 same Led stop!!!
Damn I just seen this video.. you guys have any idea if more will be available, sold out I'm late.
Typically once we launch, the parts are available for the lifecycle of the motorcycle they are for. This time we sold out of the first batch really quick, and had difficulty pushing next batch through production fast enough. Rest assured that more are being produced. It won't be long now before we have more up for sale.
Is there any solution for the Europe gets this without massive shipping costs?
When we catch up supply with the demand our dealer Cregtech will stock them in the UK ready to be shipped to you from within Europe
What about atest can this be street legal in EU
Can use it for mt10 2022 ?
This tail light does fit directly on the 10. I have personally modified two to be able to be mounted on that bike, and subsequently installed them. The gaps around the lens are not equal around the perimeter of the tail to taillight mating area. The side and top tail bodywork does not clip into the tail light. We will likely develop an MT10 specific light, but it will take some time.
So much better looking 😍
Thank you.
I know this video is old, does anyone know what fairing is on the MT-09?
Those are all of the stock fairings from the MT-09 SP. -TST
@@TSTindustries ugh, I said fairing, but was actually asking about the windscreen. FYI, waiting for my order to ship :)
@@meta6776 This was a little over a year ago but you can ask @blockheadmoto as this is his bike.
What's the price on it I'm from Guyana 🇬🇾 🤔
you can just visit the website through the link available in the description of this video and get all the information you may need
Hey there, coming from Germany and like yall know- pretty much paperwork for simple changes on your bike are needed here. Do these tail lights come with any kind of papers which show that these are legal here in Germany or sadly not?
We do not provide any such papers. We actually do not seek German or EU approval.
can i order ine Croatia
yes
how much is shiping
you would have to get a quote through our website by inputting your information with the items you want already in the cart
@@TSTindustries thsnks a lot i will tell everbody for your work
So how long to have tail light on mt10 2022 :D I hope to see this soon
Some of the components are shared between the MT09 and MT10 tail lights. I need to redesign only a few of the components, and then build the molds for them so we can mass produce. I need a bike to hang out here atthe shop for a week or two so I can carry out the design changes, prototyping and fitting. I have not secured this bike yet so I cannot tell you that the work has started, but I can tell you that I intend to do this.
Wish you could actually buy one.
Many people were able to buy one, then we ran out of the initial quantity. More are being assembled. The next batch should be bigger than the first. The third batch should be even bigger. We will reach steady state before the next busy season.
@@TSTindustries Any ETA on the second batch? Thanks for the response.
@@The9Jake if you sign up for the email notifications you will be notified the moment they are back in stock. We’re hoping that can happen in the coming weeks as our lights finalize the extensive QC process we put them through.
Make more videos with kawasaki Z400 and Ninja 400 please. I need more mods for my Z400
There is a 2023 model here waiting for us to do some work on. I know that we are developing an ECU flash already. Then we are kicking out an ABS model specific high performance intake system. And the sequential Nexus with running light. I know some of these will need a video. I also saw a scheduled video on the topic of our race development division (WorX) and the parts that were developed for the N400 platform in 2022.
@@TSTindustries what about Z400? Any new mods coming for that bike or only for N400?
@@M447DT More than likely only for the Ninja. The Z isn't too popular.
Did these take an hour to completely sell out or is it showing wrong on the website?
Sold out in minutes I couldn't get one
They sold out in less than 5 minutes.
Man that’s unfortunate, I kinda figured they’d sell out quick but not quite that quick haha. Looking forward to more being available!
Got mine ordered super stoked thanks tst looks stunning will really pop on my 22sp
@@skaartheknight5670 yeah, kinda surprised they weren't ready for this, people have been waiting quite a long time, maybe should have waited a little longer for a release date 🤷🏼
Does this one really ride that much better than the last gen?
In our opinion, yes.
So this will replace my TST brake light module
Yes.
@@TSTindustries can I resell it back to you guys 🤞🫶
@@tlick88 Lol, we don't do buy-backs but we offer a standard 30-day return period. Otherwise, you can sell it for countless other Yamaha models like some of the ones listed below.
Yamaha MT-03 ('20-'22)
Yamaha FZ-07 / MT-07 (all years)
Yamaha FZ-09 / MT-09 (all years)
Yamaha FZ-10 / MT-10 ('16-'21)
Yamaha YZF-R6s ('06-'08)
Yamaha XSR700 (all years)
Yamaha XSR900 (all years)
Yamaha Tracer 900 / 900 GT ('18-'20)
Yamaha YZF-R1 ('02-'14)
Yamaha YZF-R3 (all years)
Yamaha YZF-R6 ('06-'16)
Yamaha Raider / S / Bullet ('08-'13)
Just picked up this Sexy flasher 😂😂
👍👍🤙
Great!
I should of bought from y’all 😢
Never too late. 😉
The police fell very happy with you when doesn't get to see the plate 👍
I don't understand what plate visibility has to do with tail light installation, which happens to be the topic of this video.
Got mine ordered! Can’t wait to get it installed🤘🏻