I think that sponge goes on the back, underneth the distancing elements (the thick, black adhesive foams). According to the manual mounting them is optional. It helps to keep the optimal distance from the back wall and the sponge stops the vibrations from being transferred to the back of the cupboard.
@@aleksandarbozic6002 According to the manual that gasket could be loose if the cupboard is too wide. Perhaps you are also not mounting it correctly. You should flatten and squeeze that bouldged part into the gap. If the gap is around 3-6mm the boulge should keep it steady. As for the flap - the short one goes towards the fridge, the long one goes outwards. My gap was quite tight (3mm) so I slightly covered the boulge with dish soap to make it more slippery.
merci beaucoup pour ce tuto très clair, je ne sais pas comment j'aurai réussit le montage sans lui. encore merci. Thank you very much for this tutorial very clear, I do not know how I will have succeeded the editing without him. thanks again.
Quels sont les dimensions de tes portes? J'ai acheté un frigo Samsung qui ressemble à celui la (177cm hauteur) et je pensais que une porte de 80cm pour le bas et 100cm pour le haut ça suffirait .. malheureusement non!
So I have a question I am buying a 70/30 fridge/freezer of 1.77m in total with fridge of 1.25m and a freezer of 0.52m. What my outer doors should be? Is it ok with a 1.28m fridge and 0.66m freezer?? Please help as I am struggling to find a solution
i would check the fridge is working , powering it on, BEFORE all the mouting. Just imagine you have dont all the mounting, and then .. it has an electric error, and you have to uninstall it to return the product.
@@MatteoGrobbo if I remember it correctly I just left it loose there. I had bigger problem with plastic piece at 9:11 and had to glue it with super glue cause screw stuck in door and I had to cut it with dremel. Real adventure this fridge installation was.
More time on video plumbing vertical plane, than actual detail fitting bracket, important details for door. I advise my customers to steer clear of Samsung
I will never buy again any Samsung fridge because very very very poor printed manual. Please hire some better for this position. This video is ok, but I don’t see which screw you using for what. There are two similar and one different.
Firma samsung nie potrafi wziąć odpowiedzialność za swoje błędy! Otrzymałem zestaw montażowy całkowicie od innego produktu. Po zgłoszeniu reklamacji otrzymałem wiadomość: cyt: "możemy zaproponować odpłatnie zakup brakującego elementu." kolejny dodatkowy koszt 150zł ! Nigdy więcej współpracy z firmą samsung!
Very helpful and way better than the printed manual that comes with the fridge. Thanks for making this.
What about the self adhesive sponge that’s meant to go on the back? Do you not have to use that then?
I got the sponge goin', my guy! Are you rocking that sweet sponge as well?
@@WosserB I have no idea what you mean lol
I came searching for a video for this answer :/ - what did you end up doing?
yeah I have the same problem right now. What did you guys end up doing?
I think that sponge goes on the back, underneth the distancing elements (the thick, black adhesive foams). According to the manual mounting them is optional. It helps to keep the optimal distance from the back wall and the sponge stops the vibrations from being transferred to the back of the cupboard.
Hi, can someone tell me, for what there is the fridget gasket between the fridge and the wall?
Did you figure this out? I have the same question. They fall out all the time but the fridge seems to be properly shut also without them.
@@aleksandarbozic6002 According to the manual that gasket could be loose if the cupboard is too wide. Perhaps you are also not mounting it correctly. You should flatten and squeeze that bouldged part into the gap. If the gap is around 3-6mm the boulge should keep it steady. As for the flap - the short one goes towards the fridge, the long one goes outwards. My gap was quite tight (3mm) so I slightly covered the boulge with dish soap to make it more slippery.
Отличная, подробная, и понятная инструкция , спасибо
merci beaucoup pour ce tuto
très clair, je ne sais pas comment j'aurai réussit le montage sans lui.
encore merci.
Thank you very much for this tutorial
very clear, I do not know how I will have succeeded the editing without him.
thanks again.
Quels sont les dimensions de tes portes? J'ai acheté un frigo Samsung qui ressemble à celui la (177cm hauteur) et je pensais que une porte de 80cm pour le bas et 100cm pour le haut ça suffirait .. malheureusement non!
@@ptsmonvideo hello, moi mes portes font 71.5cm pour celle du bas, et 128.8 pour celle du haut
What are the kitchen cabinet door sizes used in the video?
the same as IKEA
Is this a IKEA kitchen cabinet?
well done!!!! Helped me a lot
So I have a question I am buying a 70/30 fridge/freezer of 1.77m in total with fridge of 1.25m and a freezer of 0.52m. What my outer doors should be? Is it ok with a 1.28m fridge and 0.66m freezer?? Please help as I am struggling to find a solution
same as IKEA.
Спасибо большое: очень полезное видео!
Спасибо большое за такую подробную инструкцию👍👍👍👍
What about lower hinge cover ??? 14:05 😆
How to remove rotate the gasket?
i would check the fridge is working , powering it on, BEFORE all the mouting. Just imagine you have dont all the mounting, and then .. it has an electric error, and you have to uninstall it to return the product.
8:24
screw becomes loose after changing doors placement and doesn’t hold this bracket anymore
I have the same problem, how did you solve? Thanks
@@MatteoGrobbo if I remember it correctly I just left it loose there. I had bigger problem with plastic piece at 9:11 and had to glue it with super glue cause screw stuck in door and I had to cut it with dremel. Real adventure this fridge installation was.
Спасибо!
Вы очень помогли!
What if i got 43mm on the left and 41mm on the bottom? The feet are already at their maximum rotation
I have the same issue - did you manage to resolve this?
Good job, Samsung!
Vous avez la même chose en français ?????
Veel dank!
Istruzioni molto utili. Molto più utili del foglio illustrativo. Grazie
brb30600eww
More time on video plumbing vertical plane, than actual detail fitting bracket, important details for door.
I advise my customers to steer clear of Samsung
ну, наконец то
I will never buy again any Samsung fridge because very very very poor printed manual. Please hire some better for this position. This video is ok, but I don’t see which screw you using for what. There are two similar and one different.
Bene
Firma samsung nie potrafi wziąć odpowiedzialność za swoje błędy! Otrzymałem zestaw montażowy całkowicie od innego produktu. Po zgłoszeniu reklamacji otrzymałem wiadomość: cyt: "możemy zaproponować odpłatnie zakup brakującego elementu." kolejny dodatkowy koszt 150zł ! Nigdy więcej współpracy z firmą samsung!
What a freaking stupid way of attqching doors