Thanks for watching and sharing your feedback. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/
I appreciate your feedback. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching. Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software. I have covered Rate and material analysis already. Have a look and let me know if it helps. 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #7 ruclips.net/video/ST_tpFp9PjU/видео.html
Thank you so much 😀 Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
AoA, sir i have a question. I saw all your videos i got a lot of knowledge but sir please can you recommend me any book or any other thing which may helpful for me to understand the drawings like USA , Canada , etc. drawing. Thanks sir please reply me.
Hi Hussain. Part of the basic requirement to understanding drawings is to know 2-Dimesional and 3-Dimensional views (2D, 3D). And this concept is the same globally. I hope this was helpful also. thanks
at 03:46 how did you select rectangles with just two clicks?, while I have to go point-by-point and click 4 times (4 corners of rectangle). How do I enable this option like you?
Dear I am following your immaculate course and learning a lot , however I couldn't understand this lecture, its square meter but you entered only one value of height there is no value of width for nech columns?
Thanks for watching. Our purpose is to get the desired result. Either you use calculator, Excel sheet or any other software. I am using the PlanSwift template that helps a lot. And you have seen how quickly I got the result. I will suggest you to learn. Basic PlanSwift. ruclips.net/video/ftAnJXRJ_PE/видео.html Template PlanSwift. ruclips.net/video/2yU_bc-13P0/видео.html
asalm.o.alikum. saady sir while determining the formwork for slab, you took linear for slab edges + area of slab. but i did't understand. it must be linear with height for its edges + surface area (bottom) of slab without mentioning height, please guide.. always thanks
Hai sir, One doubt, you took the formwork qty in beams for right, left and bottom at one takeoff , In here bottom side how to deduct the column sizes? please explain me sir.
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow. nobleqs.com/course-details/basic-quantity-surveying-with-planswift Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
For Columns why dont we use counting template as we have most of the coulmns of same size, we can make a counting formula for easy calculation for that we need hight width and breadth of the coulmn lets make a formula, for that we need following new properties Width breadth Height total liner length = 2*(width+breadth) ===> As we have 2 sides of width and breadth so multiplied by 2 and final takeoff would be QTY = [takeoff]*[height]*[Total length] am I right?
I am in the 40% percent people who has already subscribed to your channel and will keep supporting you for your amazing work.
Glad to hear it. 😇❤
Stay Connected & keep sharing your feedbacks 🤘
Informative
Thank you 😇
Its present the work process for beginners. Thank you for your kind effort QS
Your feedback is appreciated.
Are you following the complete Quantity Surveying Program?
ruclips.net/video/Ucm-FYI4Ad4/видео.html
Educative!
Keep it up Sir, we sincerely appreciate your kind gestures.
I appreciate your feedback 😇❤
PERFECT
Your feedback is appreciated.
We go for formwork now 👍👍
Yeah. Another Milestone 🚩
Stay Connected 🤘🤘😎
Thank you so much😊
Thanks for watching and sharing your feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
Great Work Sir
Glad to see your feedback 😇
you are doing great work!! Thank you
I appreciate your feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi bro i am from Solomon islands and I love your presentation .btw can you do any presentation on how to determime the Rate value.
Thanks for watching.
Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software. I have covered Rate and material analysis already. Have a look and let me know if it helps.
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #7
ruclips.net/video/ST_tpFp9PjU/видео.html
I already subscribed your channel and really appreciate your efforts❤❤
Thank you so much 😀
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Brother at the moment I'm waiting for your next episode of takes off for the reinforcement and roofing works etc 😇❤️✌🏼
Thanks for sharing your feedback. Glad to see it.
Very soon you will find more episodes.
Waiting for remaining episodes
Good to see your interest.
Very soon, you will find more.
Keep sharing your feedback.
AoA, sir i have a question. I saw all your videos i got a lot of knowledge but sir please can you recommend me any book or any other thing which may helpful for me to understand the drawings like USA , Canada , etc. drawing. Thanks sir please reply me.
Thanks for watching Syed,
Connect with me on Insta or Linkedin. I will guide your further.
Hi Hussain. Part of the basic requirement to understanding drawings is to know 2-Dimesional and 3-Dimensional views (2D, 3D). And this concept is the same globally. I hope this was helpful also. thanks
@@patrickugwu8866 Thanks for sharing your knowledge Patrick. Appreciated.
subscribe done!
Good job.
You are part of the family now ;)
Wow sir
Please Follow for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
www.reddit.com/user/SaadyChohan
twitter.com/SaadyChohan
at 03:46 how did you select rectangles with just two clicks?, while I have to go point-by-point and click 4 times (4 corners of rectangle). How do I enable this option like you?
You must click " Record mode > BOX"
You can see this option at the bottom of your Planswift Screen beside the Snap option.
@@SaadyChohan thank you!!
Keep Learning 🙌
Dear I am following your immaculate course and learning a lot , however I couldn't understand this lecture, its square meter but you entered only one value of height there is no value of width for nech columns?
Thanks for watching.
Our purpose is to get the desired result. Either you use calculator, Excel sheet or any other software.
I am using the PlanSwift template that helps a lot. And you have seen how quickly I got the result. I will suggest you to learn.
Basic PlanSwift.
ruclips.net/video/ftAnJXRJ_PE/видео.html
Template PlanSwift.
ruclips.net/video/2yU_bc-13P0/видео.html
Great training i wish if i could get excel sheet to follow properly
Dear, I always share drawings, excel & documents.
Please have a look at the description. Feel free to contact me through the social media channel.
Thanks brother
asalm.o.alikum. saady sir while determining the formwork for slab, you took linear for slab edges + area of slab. but i did't understand. it must be linear with height for its edges + surface area (bottom) of slab without mentioning height, please guide..
always thanks
Waalikum Salaam. I did the same but through the PlanSwift template. So one takeoff covers both.
For more questions, text me ln Instagram.
Hai sir, One doubt, you took the formwork qty in beams for right, left and bottom at one takeoff , In here bottom side how to deduct the column sizes? please explain me sir.
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow.
nobleqs.com/course-details/basic-quantity-surveying-with-planswift
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
For Columns why dont we use counting template as we have most of the coulmns of same size, we can make a counting formula for easy calculation for that we need hight width and breadth of the coulmn
lets make a formula, for that we need following new properties
Width
breadth
Height
total liner length = 2*(width+breadth) ===> As we have 2 sides of width and breadth so multiplied by 2
and final takeoff would be
QTY = [takeoff]*[height]*[Total length]
am I right?
If it is covering your requirements, you can use it junaid. :)
👇Learn PlanSwift Advance Template:
ruclips.net/video/DatdUKX6UAQ/видео.html
Asslam o Alikum Saad bahi ! could you explain a bit, how to show this estimation layout in sequence; the one that is being shown at 26:29
Do you mean the folder-wise quantities in the estimation tab?
ruclips.net/video/YSzkwwr0KqM/видео.html
Have a look at it. And let me know if it helps.
@@SaadyChohan Thank you so much Saad bahi !
amazing content , keep it up !!!
Connect me through LinkedIn 🙌
Sir, kindly throw more light why you added sides of stairs as SQUARE METERS while the height is 0.2 i.e it's not up 0.5.
Thank you!
Thanks for watching. Glad to know you are really paying attention.
@@SaadyChohan Exactly Sir, following the NRM2 Rules. Thank you!
@@patrickugwu8866 Good to see your confirmation!
Great 👍
Thanks for watching 😇❤