WE HAD TO PUT TWO FOOTERS ON IT!
HTML-код
- Опубликовано: 8 апр 2024
- In today's video we give shorty the look It needed!!! Be sure to subscribe for more content and comment what you'd like to see next!!!
Sensors - www.ebay.com/itm/315208640461 - Авто/Мото
I'd recommend a boost district lsa kit, they cost the same as a vortech by the time you have to buy an inter cooler/piping, injectors. Fuel pump, ect. Would also love to see an equal length exhuast on it
Them boost district super chargers look 🔥
While he is admiring the whees and tires im admiring Chomper 😩 i want that truck soo baddd
Build one
@@Sr.Fluffioso im going to
@@willis3732 do it. Worth it. Did it to my truck. Gave it a leveling kit and put on some 20x12.5x35 sure she cant steer 100% but I'm saving for a 4 inch lift kit ....if I can you can too
Love seeing a new upload! Been watching for about 4 years now! I’d love to see more denim content! I’m a big OBS fan. I commented on one of the last denim vids about some taillights i used to run, i think they’d look amazing on her
I appreciate the support man!
Supercharger kit all the way 🤘
always a good day when you upload
❤❤❤
Colormatched taillights and 3rd brake light!
For the next exhaust setup, you need to look into adding an equal length exhaust loop to it and x pipe with the quad corvette tips coming out under the license plate.
Heck yeah!! I'm looking forward to watching you build the engine. I think building the engine before boost is a solid idea!
Love the look. My wifes Yukon has the split-sevens and they really make the charcoal gray metallic pop! One of my fav OEM style wheels. 👍👍👍
I vote 2inch cowl hood for it next 🤙🏼
I think the zr1 reps would’ve looked so good on that thing
Way more expensive than split 7s
So damn clean. Makes me want a lowered 2 door
f N awesome bro 💯 love it. But need more Larry out there. Love the truck Larry
Pretty slick build so far 🤙
Wasn’t a fan of these wheels until now. Hits different on a lowered truck. Clear tails!
Mannn this setup is fire!!
Love the vids man keep up the good work
You can buy the driver side vent portion with the information center buttons pretty cheap and it literally snaps off you put your light switch etc in and then you can see the tire pressures etc. The wiring is already there to plug it in or should be.
Looks way better!🔥
I wanna see you take it all out in this truck monster cam hella boost built trans but I know as well as anybody else that takes a nice chunk of change
I always love it when you upload. You never disappoint on videos. Those are my favorite rims. And now I'm thinking about changing my muffler too. Shorty sounds bad ass.
I appreciate it!
Hey, great video!!! I was scrolling through your page like I often do in my off time 😂, and I saw a video about a 2019 GMC Sierra where you put 24s on it. And you did a little pull and it look a ton faster then baby squat cus of the 8 speed. My question lol is it worth the money to get a 2019 over 2018 because of the 8 speed. I know the interior is a lot nicer on the 2019 but the 2018 interior doesn’t bother me. Thanks
Shorty lookin good 🔥
Some clear tails and 3rd brake light would look killer on shorty
Dude, that is awesome. Side profile from a distance looks like a Hot Wheels die-cast.
Those rims are exactly what it needed looks dope
I suggest the lower front black valance! It’ll clean up the front end by a lot
Love the content bro not a lowered guy but hey it’s growing on me for sure
Video amazing❤ 👍as always shorty is looking good as ever we need some 6.0 Powerstroke and obs content
Best setup on shorty so far
So cleannn
Love the split 7
It looks so good and I like it but I think the snowflakes would of looked better but that’s just me
The Denali 2500 front end would be fire
Also. In order to boost that truck properly with an LSA, your best bet is gonna be to do a PD cam + insurance parts like lifters, trunnion, and depending on the amount of boost your gonna throw at it you’ll need to build the motor. That SBE 5.3 gonna be CRYIN. rods pistons at a minimum to run it reliably.
24s look damn good
You should either go with boost district supercharger or pro charge the truck and go with more of a performance wheel either some welds,cosmis or belaks 🔥🔥
Looks Good!!! Sounds Good Too.....
What exhaust setup is on this truck I remember the long tubes and the driver side exit but do you have just straight pipe or does it have a muffler I have a 4 door 2010 gmc seirra 5.3 I love it and it’s just straight pipes but I love the way shorty sounds
Can never go wrong with indigo metallic blue
Boost! Would like to see procharger install.
Would love to see a Boost District LSA superchager.
I have 24 inch splits o my truck because of you
Man, i got a rwd 10th gen f150. Do you recommend a leveling kit or lift kit?
Love that truck
I would recommend doing the boost and cam kit at the same time just do the labor yourself and then go get it tuned
I mean. I’d like to see some 6 spoke race stars on Hoosiers or ET street SSs for a performance truck like this but. To each their own. That setup is gonna hurt performance bad.
You should get a front lower valance lip extension after putting it on I can’t see them without one
Def need some zl1 reps😍
I’d say enjoy the process and build the engine first before boost.
Have you ever done exhaust cut outs ?
Just put some head spacers and slap a turbo on it. Can make some great power with a 5.3 boosted and just a head spacer
Put a pappy cap on the back and give it a slick blazer vibe
For sure heads and cam next
Boost is nice but nothing beats the sound of a cam choppin away. Ported heads would definitely allow more airflow!!
Aftermarket cam and supercharger 😂. Go big or go home!!!
Are you going to al truck meet this year?
Personally, i think a stall and gears would be perfect, for a n/a stock cam truck until the other mods.
Where you in Pelham last week swear I seen the truck pass by while getting gas
How can do a burnout ? Is it a posi diff ?
What exhaust is on this beauty?
they always send you one messed up wheel haha
Meh, it's alright....concave 20's with some wider tires would have been my pick
Garage tour
I like shorty
Sucks that those sensors won’t work for my L5p won’t sync to the truck 😣
Turbo!
I’m confused on the wheels you mounted and the snowflakes.. lol
cam shorty!
Supercharge it!
Nobody has done a good non intercooled Vortech video, plus you could add an intercooler later for more content. TorqStorm blower would be sweet but youd have to do your own piping. Im sure TorqStorm would help you out on the price if you did a real driveway install.
Also for a cam choice Michigan Motorsports has a new Lumberjack cam that would fit that truck nicely
Do a cam, stall and turbo
Build for boost, then boost! Buy once cry once
Boost it!
Would go with boost first
need some clear tails to match the wheels and headlights !!
That’s what I’m doing with my lm7 5.3
Superchargerrrrrr and stage 3 with a 3200 stall
do a cold air intake and cold air intake hood on shorti
I wish we could see shorty nice and lifted one day
Engine build, unless boost means supercharger.
I’d like to see a Supercharger on shorty
Definitely supercharger
You have chomper - i would vote supercharger on this - if it blows up then motor and sc :D
What does bro do for a 9-5?
Put them on Chomper that’d be sick
Super charger and cam
Pro charger with a FTI converter
😎😎😎😎😎
I say take it slow and enjoy the build. Do a cam first for obvious reasons then id say do a supercharger since you can get a video out of it
Hey you. Get new door panel for betty. Messing with my ocd...😅
Nitrous
Cowl hood
Engine build the supercharger
Can we get some more Larry videos?
Fucking beautiful brother 😮💨
Drop the rear another inch or 2
I say build the engine and then add boost
Throw a cam in it!
Roll pan
Super charger
Can we please get some Larry content please