I used my treadmil today and after an hour workout it automatically shut off. Ive tried cleaning it lubricating it and just tried to test it and noise is quite loud. It sounds like as though something may have got caught inside it. Please can u tell me how i can open the front n have a look as im clueless when it comes to these things and my husband has gone away for a bit
I just replaced brushes on a norditrac treadmill. Cleaned up carbon dust and light scotch brite on part of commutator. New set up makes a clicking noise. I'm guessing there is a seating period. Bearings were fine before and win spinning in brush free state. So by deduction it either a brush seating issue or commutator. Commutator loooks ok.. It's not a roller or belt. Any ideas?
I have a 2013 Horizon Treadmill CT 9.3 purchased in 2016. It has been used only for walking and that too very rarely. However, I have been servicing it regularly. Since a week it has started giving problem for the first time. While in use for walking, it suddenly stops and a clicking sound starts coming from the control board. After a few minutes it resets itself automatically and starts working normally but after a few minutes it again stops suddenly and the same clicking sound starts coming from the control board. I am in Canada and Horizon fitness has almost no efficient and caring after sale service here. I don't know what to do to overcome this problem. Can you please advise as how to master reset the machine to get rid of this trouble? Thanks.
I tried this method but it is still squeaking, could I news to replace the motor? IVe put a lot of soap and this does not seem to have changed anything :(
Hello, I have a model TR 9000 treadmill and it has the message "waxer maintenance refill", I would like to know how to reset the fault because I have already changed the refill and the fault remains on the display and the treadmill does not start with this message
I have a precor m9.4sp. Bought it used and working but I brought it home and it started to flicker once I plugged it in. The control panel flickers and there's a clicking noise coming from one or both of the lift motor relay. Nothing is unplugged so I don't know what's wrong... my electrical outlet is wired correctly btw
I have this model machine TRM831 its getting all windows lite glowing continuously on now counting timeing and speed indicator now working so how i can do ? ... and this parts not available in India because of old machine... Pls reply..
Hi, great tip! Do you have any suggestion on what to do if the belt (drive belt I think it's called) keeps slipping to one side? I don't think the belt is damaged, but the plastic part of the cylinder it's on moves to the side when the treadmill is on 😅
That's the problem I think I'm having. My plastic wheel looks to have moved in a few mm so the belt no longer lines up, I've tapped it a bit and it moved back to where it needs to be now I'm trying to figure out how to get it square and fix it in place
Yes, the same problem. But, when I tap it back to the right position, as soon as I start walking, it moves again! And centering the belt didn't help at all! I saw some videos where they use the superglue to keep it in place, and one guy even screwed the drive belt into the cylinder, which seems a bit extreme to me. Please update me if you find a more permanent solution, and I will do the same. :) I haven't been using the treadmill for months now :/ @@CruelEvisceration
I tried everything I could until I saw this video, and this worked immediately for me 😅. Thanks so much
Thank you worked like a charm on my Bifanuo folding treadmill. Appreciate you for taking the time to post.
Fantastic solution. Didn't realize it was that easy. Thanks
Awesome
Thank you so much for this! You solved my issue, it was so annoying!
You're welcome!
Dude this video is saving people so much money
Woohoo! You're the best. My treadmill is now so quiet. Thank you!
Awesome glad we could help
Thank you for this information. The result was very effective.
It worked! Thank you, sir.
You're welcome!
Saved me ton of time. Thank you!
I just tried this and to my amaze it worked! Thank you!
worked for me too! thanks for putting this out!
You're welcome!
I used my treadmil today and after an hour workout it automatically shut off. Ive tried cleaning it lubricating it and just tried to test it and noise is quite loud. It sounds like as though something may have got caught inside it. Please can u tell me how i can open the front n have a look as im clueless when it comes to these things and my husband has gone away for a bit
It works like magic. Thanks
You're welcome!
Thank you so much for sharing this video.
absolutely.
Awesome. Thanks for sharing ❤
Absolutely
Thanks. It worked like a charm!
Great tip bro!
Can one use any soap or is there some type you recommend?
Any soap is fine
I just replaced brushes on a norditrac treadmill. Cleaned up carbon dust and light scotch brite on part of commutator. New set up makes a clicking noise. I'm guessing there is a seating period. Bearings were fine before and win spinning in brush free state. So by deduction it either a brush seating issue or commutator. Commutator loooks ok.. It's not a roller or belt. Any ideas?
Update: rough uneven spot on commutator seems to be the issue. I can try to even it up or replace entire motor
On your treadmill model it might be costly to replace the motor might just be better off getting a new treadmill
can I apply grease that we use in bicycles?
NO this would cause it to slip badly.
@@coloradocardio thanks for quick reply
Thank you! I thought my treadmill was done for when it started making a noise.
what you use to remove the noise ? [reply pls]
it does not work with the special silicone oil?
Solved my issue, amazing!
I have a 2013 Horizon Treadmill CT 9.3 purchased in 2016. It has been used only for walking and that too very rarely. However, I have been servicing it regularly. Since a week it has started giving problem for the first time. While in use for walking, it suddenly stops and a clicking sound starts coming from the control board. After a few minutes it resets itself automatically and starts working normally but after a few minutes it again stops suddenly and the same clicking sound starts coming from the control board.
I am in Canada and Horizon fitness has almost no efficient and caring after sale service here. I don't know what to do to overcome this problem.
Can you please advise as how to master reset the machine to get rid of this trouble?
Thanks.
I have the same flickering issue with my new to me, precor m9.4 sp. Where specifically would you recommend i check first?
Many thanks for this, I have a similar noise on my walkingpad, when it gets up to heat (usually after around 40mins of use) - could this be it?
Yes
my walkingpad have similar issue. Have you fix yours?
I tried this method but it is still squeaking, could I news to replace the motor? IVe put a lot of soap and this does not seem to have changed anything :(
Hello, I have a model TR 9000 treadmill and it has the message "waxer maintenance refill", I would like to know how to reset the fault because I have already changed the refill and the fault remains on the display and the treadmill does not start with this message
I have a precor m9.4sp. Bought it used and working but I brought it home and it started to flicker once I plugged it in. The control panel flickers and there's a clicking noise coming from one or both of the lift motor relay. Nothing is unplugged so I don't know what's wrong... my electrical outlet is wired correctly btw
Hi, i dont have wax. Can i use soap?
Yes absolutely.
What can I use besides soap? Can I use my silicone lubricant?
wd or a candle
Silicone will make it slip, some kind of soap or wax
Wouldn't grease or oil be better than soap?
I have this model machine TRM831 its getting all windows lite glowing continuously on now counting timeing and speed indicator now working so how i can do ? ...
and this parts not available in India because of old machine...
Pls reply..
This speed indicator more than likely came disconnected in the upper screen, get into the back of the screen and check the lower connection.
@@coloradocardio sir i have allready checked on same another machine it's confirmed. It's micro ic also heating...so plz reply..
@@Sk-gd9ee Might have to send in your Lower motherboard (IFT box) for repair. That would be that last place we check
THANK YOU!!! ❤
You're welcome!!
Hi, great tip! Do you have any suggestion on what to do if the belt (drive belt I think it's called) keeps slipping to one side? I don't think the belt is damaged, but the plastic part of the cylinder it's on moves to the side when the treadmill is on 😅
Need to center the belt, there really is no trick.
That's the problem I think I'm having.
My plastic wheel looks to have moved in a few mm so the belt no longer lines up, I've tapped it a bit and it moved back to where it needs to be now I'm trying to figure out how to get it square and fix it in place
Yes, the same problem. But, when I tap it back to the right position, as soon as I start walking, it moves again! And centering the belt didn't help at all! I saw some videos where they use the superglue to keep it in place, and one guy even screwed the drive belt into the cylinder, which seems a bit extreme to me. Please update me if you find a more permanent solution, and I will do the same. :) I haven't been using the treadmill for months now :/ @@CruelEvisceration
paraphin candle instead of soap?
Yes that will work great
E12 fix?
I have a NordicTrack X7i, there is a clunking that comes and goes from the back roller area…any ideas?
This could be the back roller bearings are bad and will need to be replaced
@@coloradocardio so am I doing any other damage continuing to use it until I can’t tolerate the noise, before I replace?
What about a crunching sound? Noone has a video for that
If you look at the drive belt the groves may be slightly damaged.
Replace Drive belt or you might have small rocks inside your running belt.
Yes correct.
Any brand of bar soap?
Yes any brand will work
Pre or treadmill stopped working the screen is blank and it won’t turn on
Now how we fix this.
The lower control box (IFT) motherboard might be bad and news replaced.
@@coloradocardio do you have a video on this thanks
Here is the video on how to remove the box
ruclips.net/video/j6VUR-6VC5g/видео.html
Thank you bro😇
Welcome 😊
L'afficher de mon tapis affiche le code d05 qu'est ce que sa veut dire svp
Sorry, only speak English..
A and D ointment work? I only have 3 in 1 men's body wash. Damn trip to the store for soap to fix a treadmill.😂 😂
hahaha give it a try it wont hurt
बढ़िया जानकारी ❤
Thanks!
Welcome!
Yep that’s mine and the company is dodging the warranty
I’m hearing a clicking noise on mine? Brand new
Could be the motor or the rollers, not a huge problem and you can repair this.
Is this sound is of damage
No not damage just needs belt conditioner.
Dear friend,
My 6 month old lifelong is getting hot after 5 minutes at , earlier it was not. Lubricated too.
Too much drag on the bely loosen it up a little
I use solid soap instead of wax
Perfect
My dumbass put Lube on it now the belt isn't moving 😂 now what do I do...