No ward sir kya knowledgeable video Sir best video. Ye MB mere pass aya tha bios nahi tha return kardia customer ko . Abhi ye MB ayega to 100% banadunga apki helpfully video se thanks sir
Ye hmare lea proud krni ki baat h ki aap logon ki help kr pa rhe hai hm apni videos k through. Aise hi aap support krte rhe aur hm aise hi new videos update krte rhnge. Keep supporting and Sharing our videos ❤️❣️
Waalaekumassalam wwbu. Aaplogon k lea hi hai saari mehnat. Aise hi support krte rhe and hmaari videos ko share krte rhe. Thanks to the LAPTEX family ❤️
Hi. We really appreciate your explanation. Althought the difference of lenguaje the visual helps a lot. Mind you share that squematic? It looks fully complete compare to others of the same board find in the web. I haven't could find the board GPI52 LA-J951P. But that one it is pretty much the same with some differences. I will appreciate it.
@@laptex1377 Thanks for answer. But mind you share the squematic in this video. Despiste of it has some difference will help. I have a very low voltaje 0.104 in ddr reset signal at pin 108 of ddr4 memory and should be around 1.2v. I need to follow where the problem come from. I will appreciate it.
Excellent Work!! I have three computers of this model with error 3.2 supposedly memory and I do not know where to start, any suggestion or help I will appreciate it, greetings from Costa Rica!
You can the concerned video of the topic on our channel. You will get all the ideas and concepts of the problem. Really appreciate your support. We are amazed that we are reaching to each and every part of the world. 😊
Nice video sir ..I have same problem but my board is core voltage ok all voltage ok but no display and with ram.without ram same amp reading 0.50 please help sir where to test 🙏🙏🙏
Shukriya dear. Aap aise hi support krte rhe to abhi aur bhi videos aati rhengi. Hmbhi sikhte hai aur aapka support bna rhta hai to phr hmbhi motivated rhte h new concept btane k lea. Keep supporting and Sharing our videos ❤️
We have both the audience English as well as hindi. Can't upload caption due to tight schedule. So pls Cooperate. Watch the relevant videos as per your convenience.👍❤️
Hello, my HP motherboard is EPV51-LA-G078P Rev 1.0. No display and 3 blink on the Block Mayus. Keeps doing the same after BIOS flash and tryied another RAM. Any advice?
*Once again you have brought a great video wich is full from valuable knowledge i really feel proud to being with you sir 🙏🙏* *MÝ ÎĎÈÁŁ 🙋♂️ ÑŠÎŔ ŠÍŘ & ĐÏŁĎÄŔ ŚÌŔ ♥️*
Thanks alot brother ❤️. We really appreciate your true feedback and overwhelming support. We are also proud to have students like you. Keep growing and supporting us.
Please sir I would like to ask and help.me.I recieved lenovo laptop.it uses Ec Npce288.But when I press power switch button for first time laptop powers on for one second and immediately shutsdown .But when I press for second OR Third time power switch button then laptop powers on and then gives display.
No ward sir kya knowledgeable video Sir best video. Ye MB mere pass aya tha bios nahi tha return kardia customer ko . Abhi ye MB ayega to 100% banadunga apki helpfully video se thanks sir
Ye hmare lea proud krni ki baat h ki aap logon ki help kr pa rhe hai hm apni videos k through. Aise hi aap support krte rhe aur hm aise hi new videos update krte rhnge. Keep supporting and Sharing our videos ❤️❣️
Sir ji aapki videos se bhut kuch sikhne ko milta hai...
Kyunki aap solutions bhi sath hi de dete ho...
Thanks ☺️. Aaplogon ka support hi h jiski wajah se hme solution bhi dena pdta h. Aise hi support krte rhe.👍☺️
Super sir ji apke jaisa koi nhi
Thanks brother 👍. Keep supporting and Sharing our videos ❤️
Bohot kuch sikhneko mila sir
Up mera idel hay sir😍😍
Thanks 😊. Keep supporting and Sharing our videos ❤️
@@laptex1377 g sir kul , upsa bohot kuch sikha ... Is sa phale v upsa may kafi bar baat kar chukha hu , lv u sir 😍 happy diwali sir
Assalam u alaikum sir
Bahot hi zabardast video hai sir
Waalaekumassalam wwbu. Aaplogon k lea hi hai saari mehnat. Aise hi support krte rhe and hmaari videos ko share krte rhe. Thanks to the LAPTEX family ❤️
Good Explanation..... One question what is the mosfet number pqm1 i need the schematic because i have one but it burned
Schematic not available. You can get the mosfet number and check the drain current rating and replace that with the same MOSFET.
Vegas 15341 19v. Common problem please video upload
It's simple DCIN section troubleshooting...pls follow the steps you will understand it yourself.
Sir aapka vedio bahot achha. Laga
Thanks brother 👍 keep supporting and Sharing our videos ☺️
@@laptex1377 sir aapka contact number dijiye
Sir please kuch desktop n all in one pc ke board ki bhi case studies ki videos share kijiye
Desktop mein Repairing ni krta islea wo to possible ni h. Jitna possible hga wo aapko mil jaega. Aise hi support krte rhe aur videos share krte rhe👍😊
Sir. Excellent work.. nasir sir cource ki koi bhi aik demo video mil sakti hay?
WhatsApp or call.
9031240767
For course detail
AM FROM GHANA-WEST AFRICA. I LOVE YOUR VIDEOS...HOPE I CAN GET THE COLLECTION IN ENGLISH
Sure brother.
WhatsApp
+919031240767
For details
WhatsApp
+919031240767
For details
Sir, then what happened to that TON resistor earlier? Did it miss? Or has someone already removed it?
I don't know anything could be possible.
Hi. We really appreciate your explanation. Althought the difference of lenguaje the visual helps a lot. Mind you share that squematic? It looks fully complete compare to others of the same board find in the web. I haven't could find the board GPI52 LA-J951P. But that one it is pretty much the same with some differences. I will appreciate it.
Okay when it will be available we will share.
@@laptex1377 Thanks for answer. But mind you share the squematic in this video. Despiste of it has some difference will help. I have a very low voltaje 0.104 in ddr reset signal at pin 108 of ddr4 memory and should be around 1.2v. I need to follow where the problem come from. I will appreciate it.
Namaste nashir sir
Sir mujhe dso leni hai kon sa le
Guid kar digiye aor price bhi bata dijiye aor apke dso ki complite traing video bata digiye
Contact on the given number.
9031240767
For details
AJ to sir surprize ediya ap nay 😍😍😍😍😍😍😍😍😍💖💖
😁😁😁😁
Can we get an English version of this sir
Not now but sure will upload the English version later on.👍
Excellent Work!! I have three computers of this model with error 3.2 supposedly memory and I do not know where to start, any suggestion or help I will appreciate it, greetings from Costa Rica!
You can the concerned video of the topic on our channel. You will get all the ideas and concepts of the problem. Really appreciate your support. We are amazed that we are reaching to each and every part of the world. 😊
Good job sir
Thanks 😊. Keep supporting and Sharing our videos ❤️
Nice video sir ..I have same problem but my board is core voltage ok all voltage ok but no display and with ram.without ram same amp reading 0.50 please help sir where to test 🙏🙏🙏
Check RAM section and DRRAMRST
@@laptex1377 DDD4 which pin for dramrst sir 🙏🙏
@@laptex1377 pin no 108 there is no voltage
Very good information ,Thanks you Sir.
Always welcome brother 👍. Keep supporting and Sharing our videos ❤️❣️
Sir ji aap old Nahi huye 😡😡abhi to bahut kaam Karna he aur hame bahut Kuch sikhna he 😁😁 sir next video apple ke new processor M1 chip ke baare me 😀
Shukriya dear. Aap aise hi support krte rhe to abhi aur bhi videos aati rhengi. Hmbhi sikhte hai aur aapka support bna rhta hai to phr hmbhi motivated rhte h new concept btane k lea. Keep supporting and Sharing our videos ❤️
Very good information.Thanks you!!!
Always welcome and ready to help 😊. Keep supporting and Sharing our videos ❤️
sir i need the value of ic pu301 near sio & pq 81 near ram slot both are burnt Thanks
Check on schematic
Nice video sir, is it possible to make such videos with English subtitles? Thanks
It's s hit tough job. But surely will upload the English version of the video soon 👍
@@laptex1377 are you sure english? booh not really.drawing
You can go to English playlist videos on our channel.
Excellent work sir,, well guidance
Thanks ☺️. Keep supporting and Sharing our videos ❤️❣️❤️
Thanks for boost up our knowledge.
Always welcome brother 👍. Keep supporting and Sharing our videos ❤️❣️❤️
Nice video sir g
Thanks 😊. Keep supporting and Sharing our videos ❤️❣️
Sir u re really great
Thanks brother 👍. Keep supporting and Sharing our videos ❤️❣️❤️
please sir what can be the problem here .is it power switch or EC
Problem in RAM section.
Great Sir ji 👌👍
Thanks brother 😊. Aise hi support krte rhe.
brilliant sir.........
Thanks 😊. Keep supporting and Sharing our videos ❤️❣️❤️
Sir ram ic ki jaga Mai buck converter use kar sakta hu?
Try krke dekho phr mujhe bhi btao abhi tk to maine try ni kiya hai😁
Thanks Good informaion
Always welcome and ready to help. Keep supporting and Sharing our videos ❤️
Hp la g07 schematic diagram pls
Not available
what is that awvaid ic i have that burned
Regulator IC.
you are great
Thanks brother 😊. Keep supporting and Sharing our videos ❤️❣️❤️
Superb sir 🔥
Thanks brother ☺️. Keep supporting and Sharing our videos ❤️❣️
Thank you so much sir
Always welcome and ready to help 😊. Keep supporting and Sharing our videos ❤️❣️
Good work
Thanks 😌. Videos share kr dena Facebook pe.👍👍
Please sir help us and upload English version
We have both the audience English as well as hindi. Can't upload caption due to tight schedule. So pls Cooperate. Watch the relevant videos as per your convenience.👍❤️
Pl 2501 kon sa voltage aa rah he
Follow the video its already mentioned.
Sir iska diagram ab aa chuka h bina fix par
👍👍
My asus x99 a ii blink 00. no display
Check all the requirements of PLTRST. flash BIOS.👍
Hello, my HP motherboard is EPV51-LA-G078P Rev 1.0. No display and 3 blink on the Block Mayus. Keeps doing the same after BIOS flash and tryied another RAM. Any advice?
Check the S3 States supply is proper or not with DSO.
sir i want to buy scrap motherboard of laptop 200.pc
Contact to the sales team of Laptex for parts and tools.
❤
❤️💖👍
*Once again you have brought a great video wich is full from valuable knowledge i really feel proud to being with you sir 🙏🙏*
*MÝ ÎĎÈÁŁ 🙋♂️ ÑŠÎŔ ŠÍŘ & ĐÏŁĎÄŔ ŚÌŔ ♥️*
Thanks alot brother ❤️. We really appreciate your true feedback and overwhelming support. We are also proud to have students like you. Keep growing and supporting us.
Sir hp 840 g1 ka board hai hp ke loge se aage nhi badhta hai
💯💯💯
Thanks
Very nice
Thanks 😊
Super
Thanks 😊
SALUT MOM AMI J AI BESION DE SCHEMA DE CETTE CARTE
English pls... can't understand your language sorry.
Turn on subtitle plse
Surely will upload next time.👍
Please sir I would like to ask and help.me.I recieved lenovo laptop.it uses Ec Npce288.But when I press power switch button for first time laptop powers on for one second and immediately shutsdown .But when I press for second OR Third time power switch button then laptop powers on and then gives display.
Check SIO requirements and sequence of power switch.
🥳🥳🥳🥳
👍❣️❣️❣️
nice
Thanks ☺️. Keep supporting and Sharing our videos ❤️❣️
Greet
Thanks 😊. Keep supporting and Sharing our videos ❤️
👍👍👍👍👍👍❤️❤️
😊😊😊
Iss board Ka digram mere pas hai Kisi ko Chahiye to purchase krna hoga
Good
English plse
Sure we will try to make the English version soon. Keep supporting and Sharing our videos ❤️
English please
There are English videos also brother. You can go and watch them on our CHANNEL 😊😉