Nescafe DOLCE GUSTO Circolo - Disassembly and repair Krups KP5001
HTML-код
- Опубликовано: 24 авг 2024
- Nescafe DOLCE GUSTO Circolo - Disassembly and repair Krups KP5001
Hello guys,
Welcome to a new repair video. Today we have in our shop a DOLCE GUSTO Circolo machine that has a faulty mechanism and stuck capsule try.
you have saved a machine with this vid, just needed new injector plate and o ring, around £9, they hadn't been changed in 13+ years
Thanks, bud. I've retrieved my own after moving house(s). One of my cats aka the stupid one knocked mine off the worktop.
The water switch knob has come off and I think the switch needs reseating.
Thanks Adrian. I also succeed to open, repair and clean inside with your video. Best wishes...
thank you so much for the guide... worked great with my kp510 just a bit different in the end where you have to put the lever in the middle and works just fine. just wanna let people know that if you want to check that everything works without the plastic be carefull becouse it gets really hot in the tank on the side. got a little burn on my finger. anyway it was still a good deal since it was a fix it and keep it situation. thank you adrian.
Esse video me ajudou aqui no Brasil!
Thanks for this video, Adrian do you have one for repairing the power button on circolo? It's kaput nothing happening, no power at all. Many thanks
SUPER UTILE
Hi, I have the same coffee maker. Transistor Q5 on the board has blown. Would you have the characteristics of that transistor? Greetings from Tucumán, Argentina. thank you
It's só easy!!!!😂😂😂😂
Do you have a video to repair the part where you put in the capsule ? My machine still heats and puncture the whole in the capsule , but the water runs aside the capsule holder instead of into the cup
Hello. Yes look on my channel for the video called "Dolce Gusto- Leaking diffuser / injection plate. "
I didnt get to remove the front panel like u did. Any tips? I put as much force as i could almost broke the thing apart.
I had the same problem until I rewatched from 6:35 to 8:34. He "pulled" the side pieces a bit to the side. After I did that I was even easier than in his video to remove the front.
wat caused no water flow?
Saya punya kurps type510 rusak tidak mengalir airnya dimana saya bisa service.tks
Kiedy będzie filmik o Daihatsu Ferozie
My machine is leaking water from the water tank and even more when I put it in the machine, what do I do?
Hi. You need to change the 2 orings . One on the machine in hove and one in the water tank.
Is there a video on how to replace them? I have the Circolo Machine@@benassy69
I have videos on my channel for both but not on the circolo model. But maybe it will inspire you.
Mine doesn’t turn on 😢
Dimana tempat service atau yang dapat di telp.tks