Hello po thank you so much for this! Super helpful! I was in a state of panic because I found a small part of bond paper jammed inside the printer that was hard to pull. I tried opening the scanner unit and it's now working again. Thanks!!
Hiii can i also consult on how to reattached those white threads/wire on L3110? Ours got disattached from it’s places so currently there’s no connection or power in our printer😞. Thank you 😊
hi, thanks for the video first. I have the same problem, the springs are not moved from their place and there are no foriegn objects in the paper way. Still it showing paper jam... any solution please!!!
@@dudzdaddytech5497 it is not feeding the paper on its own. if i move the the pickup roller with hand then it takes and rolling out the paper on the other end. Then the paper jam light blinks continuously.
Kindly check the roller, check it's alignment, it is located in the center lower portion, it should be in placed along with the slot. If not properly align, on its back is a spring and probably not hooked.
encouter po ba?pag mag xerox ng mga apat na papel tas nag feed ang papel. nag sstop cxa mga 20 second bago mag print. 1 ulit tas sunod ganun ulit. pag pasok ng papel nag sstop.
Hi Louise, thanks for watching my video.. And to answer your question, it is easier to pull the paper on the strongest point where the paper will be gripped firmly, however, if the paper is torn, you need to open the printer, remove the two screws and you have to pull out all the pieces of torn paper. You may use pincette to hold the paper, drive the roller manually to push the paper out.
This is AMAZING! One question though, our printers top is NOT going down, its a Epson L4160. It seems like the printer cover is stuck so we're trying to fix that. Also, apperantly if we keep the lid open, we CAN'T print. This is a HUGE problem, can you give any suggestion(s) on what to do so it goes down?
ano po problema nagpaper jam siya...oke naman yong spring...nakakabit naman...bagong palit din ng timing belt...paper jam parin nilinisan ko rin ang encoder strip....error parin
Lahat ba nag papel same sinasabi ng pinter and all times Un ang error. Kapag once in a while nkkkpagprint ka naman try corning the roller, but when at all times yan ang error check aligent of rollers and or foreign object.
Hi Cherry, please check the basic first, the ink level maybe low and requires refill, there might be a trapped paper so chk and clean the rollers as well. If you refill the ink perform ink charging, refer to my other video.
Inform me with the ink level condition, roller, if you find jammed piece of paper. Then we will proceed to next possible cause is there is no improvement.
Hello. Sorry for replying late here po, but my printer already work na po. Ang sabi po dun sa pinagpagawan namin, di pa daw po resettable yung printer ang upon checking po hindi naman po paper jam at mataas pa po yung level ng ink. Ang sabi po nung gumawa is kinalawang daw po yung isang turnilyo sa loob kaya pinalitan
@@dudzdaddytech5497 thank you for your reply.. I have opened and checked inside, but there is no paper jam inside the printer. I don't know what to do next.
Bagong bago po yung L3310 printer namin. Okay naman noong una. Tapos ngayon magpriprint lang po 1 page then i loload niya po yung next page tapos po kalagitnaan mag eerror po ng paper jam. I checked all naman may spring naman lahat pero bakit po ganun
1 month pa lang po since nabili. Then siguro on the fourth time na ginamit saka nagka ganun. Okay naman po print pag photocopy, pero po pag magpriprint like from a word file, ipriprint niya lang yung first page then kalagitnaan ng printing ng second page eh bigla titigil with error message na may paper jam
Yung printer ko may mga page na blank, di sya pumapasok ng sagad pero yung ibang page okey na man may mga time po na di pumapasok ang papel... paano po yun? salamat
Hi, most likely rollera need to be clean or meron foreign material sa loob, remove 2 screws and perform cleaning using alcohol and remove debris inside.
Sir na try ko po yung procedure..but its not working...yung disc hindi nman po tanggal..wala akong mkitang spring..paper jam po ang problem ..wala ring foreign object sa loob
Hi Maexinee, technically hndi sila relevant , pero ang masasayang kapag nag jam ang papel at nalukot is ung papel at ung ink dun sa printout na ongoing na hndi nang good output.
@@maexinlee8328 need ntn ma tanggal muna ang papel, patnggal ung dalwang screw sa harap then itaas mo ung scanner assemble dahan dahan tanggalin ang papel,, update me with the result. Thanks
Hi, you to visit the inside of the printer,... Possible foreign object or may gap SA mga roolers and sliders, check muna ung basic and perform cleaning of rollers using alcohol
I have problem; it always takes paper, but right side of paper is inside and left is not, it happens always. It is so annoying, please tell me more, if you know... Btw, I have L3151
Hi Adam, did you try opening up to the paper feeding assembly., you may check any abnirmality in there and clean the rollers as it may be slippery already.
@@dudzdaddytech5497 Hi, I removed little pieces of paper but it still takes paper on only one side. Anyway; thanks for responding, I really appreciate that. My dad took the printer to service so I hope there will be no problem in the future.
Hi, can you pls help me? I cant find any foreign objects in my printer since its just new, however, it cannot print in photo paper, it does eat the paper but stops midway and keeps saying paper jam
Hi, what happened to your printer? Please check if there is teared paper.. Perform cleaning of rollers as well, and there is another spring in the middle lower portion kindly check as well.
You are such a BIG HELP BRO!!!! Im almost about to go to the TECHNICIAN!!!!! THANK YOU so much po!!!!
Thank you..
Thanks u saved me from getting scold from my dad 🥺
Hello po thank you so much for this! Super helpful! I was in a state of panic because I found a small part of bond paper jammed inside the printer that was hard to pull. I tried opening the scanner unit and it's now working again. Thanks!!
M
It ii]
It ii]9i9i9]iii
Thank you so much po. It's a big help and finally pwd nang mag.print ulit. So happy 🥰🎉
Hiii can i also consult on how to reattached those white threads/wire on L3110? Ours got disattached from it’s places so currently there’s no connection or power in our printer😞. Thank you 😊
It has contact underneath, you may simply insert contact facing down
thank you so much ill give this video a thumbs up it help alot
Thanks...Naayos printer ko..Kaya lang, Hindi ko nkita sa loob ng printer yung spring..Buti nalang may sirang printer na maaring pagkunan ng spring..
Thanks for watching...
napa subscribed talaga ako dahil nasolved problem ko
hi, thanks for the video first. I have the same problem, the springs are not moved from their place and there are no foriegn objects in the paper way. Still it showing paper jam... any solution please!!!
Hi I need to know how the error shows, does it try to feed some how or the very first time you press copy or print the light blinks at once?
@@dudzdaddytech5497 it is not feeding the paper on its own. if i move the the pickup roller with hand then it takes and rolling out the paper on the other end. Then the paper jam light blinks continuously.
Kindly check the roller, check it's alignment, it is located in the center lower portion, it should be in placed along with the slot. If not properly align, on its back is a spring and probably not hooked.
@@dudzdaddytech5497 can u please do a video on this
How to solve Epson printer ET 2600 jam problems.if I am out the spring of my printer.
Sir ye printer my purchase kar sakta hu best hai ya nhi ya koi aur hai to usska name बताइए प्लीज
Hi Sir, Epson is still good printer, easy to fix, ink cartridge is cheaper and the printer is affordable.
You can still consider buying Epson l3110
@@dudzdaddytech5497 thanks btane ke liye
Thank you so much, this video save my life
Hope to get answer.
The printers internal is intuck ! No foreign objects ... spring is there but the printer is not properly getting the paper
Thanks sir! Hinahanap ko lang talag pano iopen siya. Nasagot niyo po yung hinahanap ko :D
Thank alot .
I fixed my printer the way you show.
encouter po ba?pag mag xerox ng mga apat na papel tas nag feed ang papel. nag sstop cxa mga 20 second bago mag print. 1 ulit tas sunod ganun ulit. pag pasok ng papel nag sstop.
Thank you for this Sir. This helped me save cash for repair.
thank you....
Salamat Po from Myanmar 🇲🇲
hello I have a problem on my printer to print the card stock it does not work, plain paper it works help me
Alhamdulillah… terima kasih sangat2 membantu
Thankyou po,ngayon prob ko nlng kung pano sasabihin Kay papa
Guys my next video is how to remanufacture your printer ink cartridge..
tq... solve my problem.... you re my hero hehehe
Thank you..
Paano po if napunit napo yung papel na nasa printer po?
Do i still do the same? Or do i have to forcefully remove it
Hi Louise, thanks for watching my video.. And to answer your question, it is easier to pull the paper on the strongest point where the paper will be gripped firmly, however, if the paper is torn, you need to open the printer, remove the two screws and you have to pull out all the pieces of torn paper. You may use pincette to hold the paper, drive the roller manually to push the paper out.
Unscrew mo yung dalawa sa harapan para maiangat mo yung cover then tanggalin mo na yung mga tiratirang papel
This is also my concern. I'll try this solution, hope it'll works.
pano ganyan error boss okay naman spring. sa my roller
tapos sa may sensor para sa paper jam okay din naman,anu paba pasible problem
Pwede ko po ba iikot yung white na circle kung saan ihook yung spring?
Very Simple but very effective
will this void the warranty?
Basically yes, so if the unit is underwarranty you may bring it to the nearest shop .
This is AMAZING! One question though, our printers top is NOT going down, its a Epson L4160. It seems like the printer cover is stuck so we're trying to fix that. Also, apperantly if we keep the lid open, we CAN'T print. This is a HUGE problem, can you give any suggestion(s) on what to do so it goes down?
Hi apology I overlooked your message, how is your unit now?
ano po problema nagpaper jam siya...oke naman yong spring...nakakabit naman...bagong palit din ng timing belt...paper jam parin nilinisan ko rin ang encoder strip....error parin
can i see the video ,send it via msgr
thank you bro 😭 there was a pen stuck in there
Tq a lot❤❤❤
Thank you so much bro, it's working🫶
Paano po ba ang pagRepair ng Printer un ganyan ang sitwasyon?
May i know what’s the specific name for the screwdriver?
Paano po pag kinakin ung papel tapos nag stop half ng paper at nag paper jam error po? thank you po
Sir ano po kaya ang gagawin ko sa printer kong Epson L5190 lagi pong nalabas sa screen nya ang paper out in rear paper feed?
Hi Z pasuyo pavideohan and pasend sa meesenger ko pr mas ma visualize ko
Lahat ba nag papel same sinasabi ng pinter and all times Un ang error. Kapag once in a while nkkkpagprint ka naman try corning the roller, but when at all times yan ang error check aligent of rollers and or foreign object.
Video. Pla on how you put the spring on its. Location pls
sir pano po pag yung power button, ink at paper yung nagb blink?
Hi Cherry, please check the basic first, the ink level maybe low and requires refill, there might be a trapped paper so chk and clean the rollers as well. If you refill the ink perform ink charging, refer to my other video.
Inform me with the ink level condition, roller, if you find jammed piece of paper. Then we will proceed to next possible cause is there is no improvement.
Reset na po yan
Try download the reset program and install
Hello. Sorry for replying late here po, but my printer already work na po. Ang sabi po dun sa pinagpagawan namin, di pa daw po resettable yung printer ang upon checking po hindi naman po paper jam at mataas pa po yung level ng ink. Ang sabi po nung gumawa is kinalawang daw po yung isang turnilyo sa loob kaya pinalitan
Hellow... I have an Epson l3110 printer. All three lights are blinking n the error code is 000032. Can you please help me out 🙏. Thank you
Hi kindly check inside the unit. Remove 2 screws and position upward the scanner assembly, check for jammed paper and foreign materials.
@@dudzdaddytech5497 thank you for your reply..
I have opened and checked inside, but there is no paper jam inside the printer. I don't know what to do next.
@@kekhrieselhousolo1045 do you have the resetter program ?
@@dudzdaddytech5497 No. I'll try that thank you.
@@kekhrieselhousolo1045 from the resetter you can also see the error code and it will redirect you to the cause of the problem.
Bagong bago po yung L3310 printer namin. Okay naman noong una. Tapos ngayon magpriprint lang po 1 page then i loload niya po yung next page tapos po kalagitnaan mag eerror po ng paper jam. I checked all naman may spring naman lahat pero bakit po ganun
How long have you been using the unit properly before you have experience the problem?
@@dudzdaddytech5497 wala pa po atang 1 month. Tapos po ilang beses pa lang po nakapag print.
1 month pa lang po since nabili. Then siguro on the fourth time na ginamit saka nagka ganun. Okay naman po print pag photocopy, pero po pag magpriprint like from a word file, ipriprint niya lang yung first page then kalagitnaan ng printing ng second page eh bigla titigil with error message na may paper jam
@@leaharoco6231 can you try printing in other apps like power point excel or try using other laptops , possible setting
Yung printer ko may mga page na blank, di sya pumapasok ng sagad pero yung ibang page okey na man may mga time po na di pumapasok ang papel... paano po yun? salamat
Hi, most likely rollera need to be clean or meron foreign material sa loob, remove 2 screws and perform cleaning using alcohol and remove debris inside.
Sir na try ko po yung procedure..but its not working...yung disc hindi nman po tanggal..wala akong mkitang spring..paper jam po ang problem ..wala ring foreign object sa loob
Tnx. Working tips👍
Paano po pag di mo napansin naubusan ng papel tapos na off ko tapos on ulit tapos nong nagprint ulit ako error na
Hi my printer is L3210 and shows paper jam but I don't see any paper 🥺🥺 I need some help
Yung ink po ba sa printer kapag nagpaperjam Ang printer ay masasayang??
Hi Maexinee, technically hndi sila relevant , pero ang masasayang kapag nag jam ang papel at nalukot is ung papel at ung ink dun sa printout na ongoing na hndi nang good output.
Hi po!Hindi po lumabas Yung paper at nag red po Yung Ano sa may gilid.ano po gagawin dun?
@@maexinlee8328 need ntn ma tanggal muna ang papel, patnggal ung dalwang screw sa harap then itaas mo ung scanner assemble dahan dahan tanggalin ang papel,, update me with the result. Thanks
Wala na po Yung paper
Pero Hindi po gumagana Ang printer
Hi po. Nag ka paper jam po yung printer ko and my mga naiwan pong paper sa loob, maliit po hindi ko po makuha. Any tips po?
buksan mo remove 2 screws sa harap, manual roll mo roller habang clip mo ung maliit na naiwang papel gamit ang tweeser or tsani
Super spasiba
Omg! Thank you so much po
Hello po,i'm encountering same prob po red blink yet wala naman pong foreign object
Hi po , need nyo po ng epaon adjuatment program tyagaon lng nag search sa web baka may libre makuha
How to know what the problem why paper continue feed and not printing
Remove and then reload the paper then press the color button
What if may naiwan pong paper na napunit sa may paperway kaya di na po ako makaprint, what to do po?
Need mo maalis ung paper gamit ka tweezer , o tsani ..dahan dahan mo hhatakin punit n papel.
sir ano pong gagaein kapag nag multipage error
pero wala naman jammed na mga papel? 😖
Hi, you to visit the inside of the printer,... Possible foreign object or may gap SA mga roolers and sliders, check muna ung basic and perform cleaning of rollers using alcohol
Matagal na ba printer mp, pd din ireset
wow new technique.
Hindi ko nakuha... saan po Repair Shop ninyo?
I have problem; it always takes paper, but right side of paper is inside and left is not, it happens always. It is so annoying, please tell me more, if you know... Btw, I have L3151
Hi Adam, did you try opening up to the paper feeding assembly., you may check any abnirmality in there and clean the rollers as it may be slippery already.
@@dudzdaddytech5497 Hi, I removed little pieces of paper but it still takes paper on only one side. Anyway; thanks for responding, I really appreciate that. My dad took the printer to service so I hope there will be no problem in the future.
@@adamharakal9370 You may ask the service personnel what is the cause so you may know how to improve usage later.
Thank you for watching my video.
Thanks po tatay
Hello po, bakit po sakin parang late niya kinukuha yung paper nauuna mag print? sana po matulungan niyo ko. Thank you po
Pacheck baka madumi loob may foreign material maalikabok , vaccum or air blow mo muna.
Thanks You, very helpfull
Thanks for watching
PakiCloser po. Pwede po bang iulit un video medyo paputolputol un video ninyo. Paano po un?
Hi. How to fix paper jam in EPSON L385? Thank you :)
hi , does the paper get it before it shows error?
Good morning
Salamat sa idea paps
thanks a lot I did it!!
Help. Pumapasok ng konti yung papel kaso bigla gumigilid then nagjajam
Kindly open the unit possible may foreign material ...
Hi, can you pls help me? I cant find any foreign objects in my printer since its just new, however, it cannot print in photo paper, it does eat the paper but stops midway and keeps saying paper jam
Did you try opening it and check for any fallen debris onside or torn paper.
Check also if you are using a very thick photo paper.
Thanks alot pal
power..
Thanking you so much you r very helpful this situation
Thank you for support.
thank you very effective sir
Thank you.
Why can't I fully open mine?
Sir, yung ink cartridge po namin hindi gumagalaw
Ano error nakadisplay
@@dudzdaddytech5497 ruclips.net/video/FrqXF85NOLE/видео.html nina-nozzle check ko po pero hindi naman po rume-respond yung printer
Nag biblink ilaw?
Try ko din
I love u bro
What if po nahulog po ung spring po dun 🥺
Thanku brother
sir paano pag my banging sound.. ?
Most likely hndi makaikot mga moving parts dahil sa foreign material inside baka tumutukod
@@dudzdaddytech5497 my facebook kau boss? bka pde ko isend video po
@@archinitonaprito3749 meron po fb... Dudz Bawalan
Na-resolve na po ba issue ng printer nyo? If yes, paano?
Thanku so much
Thanks A LOT
Tulong po. Help po.
Salamat idol
Thanks brother
Thanks.
doesn't help, my concern is paper jam :(
Hi, what happened to your printer? Please check if there is teared paper.. Perform cleaning of rollers as well, and there is another spring in the middle lower portion kindly check as well.
Thank you so much....
pahelp po nakuha po ka c ung spring napakahirap na
Hindi mo mkuha ung spring ganun ba?
thanhkyou yrr
Sir pagawa naman ng printer ko
Z10
nice...
Thanks dada
Pppoo
Sale Tu rahta kaha hai India me hai to mere bhai Hindi bol le
lol it take us 1 hour to get the spring
hahhaha you can flip the printer actually
@@dudzdaddytech5497 we didnt flip the printer because we thought the ink wil lick
@@johnniokleinvaldez5035 , you can flip it of course maintaining the ink container upside down ...